emscope requires updated PPK2 firmware to operate

[gcohler]

Documentation should guide user to update PPK2 firmware before using with emscope.

Update Nordic Power Profiler II (PPK2) Firmware using NRFconnect software

Before using the PPK2 with Emscope, the PPK2 must have its firmware updated.

To do so, you must do the following:

1. Download and install the nrf-connect software from nordic: https://www.nordicsemi.com/Products/Development-tools/nRF-Connect-for-Desktop/Download#infotabs
2. Start nrfconnect GUI and click Power Profiler button (install)
3. Once installed click Power Profiler button (open)
4. Connect the PPK2 using the datapower USB connector to the PC
5. Connect the PowerProfiler software to the PPK2
6. When (if) prompted about updating PPK2 firmware, accept and update the firmware

Once the above is complete, the PPK2 should now work with emscope.

[biosbob]

i want to assume users of the PPK2 (and/or the JS220) have already used those tools and have some familiarity with them.... any firmware updates have presumably already happened....

over time, perhaps, novelbits will have "training videos" on how to get started with the PPK2 or JS220....

for sure, anyone who wishes to "browse" captured data won't need to worry about this....

[gcohler]

It's up to you. I would put instructions on using emscope in emscope.