embassy-rp: uart: Increase RX FIFO watermark#3933
Closed
d3zd3z wants to merge 1 commit intoembassy-rs:mainfrom
Closed
embassy-rp: uart: Increase RX FIFO watermark#3933d3zd3z wants to merge 1 commit intoembassy-rs:mainfrom
d3zd3z wants to merge 1 commit intoembassy-rs:mainfrom
Conversation
Change the UART RX FIFO depth from 1/8 to 7/8. This should allow for buffered receipt of uart data with a lower IRQ load. The PL011 fifo is pretty smart about the fifo, it has an automatic timeout (which triggers an interrupt) of about 4 characters worth of time, so setting this threshold doesn't affect the behavior of receipt of a partially filled fifo. This should not have any affect on the DMA mode, as the DMA will generally drain the fifo as data becomes available. The constraint for the fifo threshold should be determined by expected interrupt latency. The IRQ needs to be able to drain the fifo before it fills. As such, the proper threshold depends on system design and data rate. At full speed (7.8 Mbaud), the remaining 8 characters will come in in about 10us, which is probably insufficient. But, the time is quite adequate at lower speeds.
Contributor
|
This seems reasonable to me, but why not add the fifo depth to the config? |
Member
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Change the UART RX FIFO depth from 1/8 to 7/8. This should allow for buffered receipt of uart data with a lower IRQ load.
The PL011 fifo is pretty smart about the fifo, it has an automatic timeout (which triggers an interrupt) of about 4 characters worth of time, so setting this threshold doesn't affect the behavior of receipt of a partially filled fifo.
This should not have any affect on the DMA mode, as the DMA will generally drain the fifo as data becomes available.
The constraint for the fifo threshold should be determined by expected interrupt latency. The IRQ needs to be able to drain the fifo before it fills. As such, the proper threshold depends on system design and data rate. At full speed (7.8 Mbaud), the remaining 8 characters will come in in about 10us, which is probably insufficient. But, the time is quite adequate at lower speeds.