Unable to get VBUS (+5V) on the ESP USB (USB Host) port on the ESP32-S3 DevKit C v1.0 board (AEGHB-162) #71
Description
On my ESP32-S3-USB-OTG board, I need to set GPIO 12=>1, 13=>0, 17=>1, 18=>1 in order to enable power to the USB Host port. Otherwise, that port will not be able to supply power to the USB Devices that connect to it.
On my ESP32-S3 DevKitC v1.0 board (see diagram below), I don't see anything that would imply that I have to set those or any other pins. In fact, it looks like both micro USB ports are connected to +5V and GND and that they both have their own D+ and D- pins, which is all that I need.
Unfortunately, I can't see the +5V on the ESP USB port. Instead, I have to get share +5V and GND pins from an external USB A port.
Is there a way for the board to supply the needed +5V (I assume the GND is already working)?
