Software setting : SSH

.. describe all option ini file.

LPWM = 12 laser power intesity
CROPH = 180 Set pixel need delete on from top for more clean output
QUALITY = 0 Set scan resolution 0 (512steps/photos) 1 (1024 steps/photos) 2(2048 steps/photos)
ROT = 0 set position of camera 0 orizontal 90 vertical
CAMERA_HFOV = 50.0 Set this to the camera lens angle that you worked out above.
CAMERA_DISTANCE = 0.30 The distance from the camera 'foot' to the center of the turntable.
LASER_OFFSET = 45.0 The angle between the centerline of the camera and the laser.
HORIZ_AVG = 2 The number of consecutive horizontal points to average together to smooth out the surface.
VERT_AVG = 2 The number of consecutive vertical points to average together to smooth out the surface.

** hidden value on html page
A = 9 gpio rpi for 1 in uln2003 (stepper)
An = 25 gpio rpi for 2 in uln2003 (stepper)
B = 11 gpio rpi for 3 in uln2003 (stepper)
Bn = 8 gpio rpi for 4 in uln2003 (stepper)
LASER = 18 gpio rpi for 5 in uln2003 (laser line)
LIGHT = 7 gpio rpi for 6-7 in ulm2003 (light)
DELAY = 0.002 delay from stepper sequence
FRAME_SKIP = 1
POINT_SKIP = 1
RESW = 640 Set camera resolution
RESH = 480 Set camera resolution