Software setting : SSH

.. describe all option ini file.

LPWM = 12 laser power intesity CROPH = 180 Set pixel need delete on from top for more clean output QUALITY = 0 Set scan resolution 0 (512steps/photos) 1 (1024 steps/photos) 2(2048 steps/photos) ROT = 0 set position of camera 0 orizontal 90 vertical CAMERA_HFOV = 50.0 Set this to the camera lens angle that you worked out above. CAMERA_DISTANCE = 0.30 The distance from the camera 'foot' to the center of the turntable. LASER_OFFSET = 45.0 The angle between the centerline of the camera and the laser. HORIZ_AVG = 2 The number of consecutive horizontal points to average together to smooth out the surface. VERT_AVG = 2 The number of consecutive vertical points to average together to smooth out the surface.

** hidden value on html page A = 9 gpio rpi for 1 in uln2003 (stepper) An = 25 gpio rpi for 2 in uln2003 (stepper) B = 11 gpio rpi for 3 in uln2003 (stepper) Bn = 8 gpio rpi for 4 in uln2003 (stepper) LASER = 18 gpio rpi for 5 in uln2003 (laser line) LIGHT = 7 gpio rpi for 6-7 in ulm2003 (light) DELAY = 0.002 delay from stepper sequence FRAME_SKIP = 1 POINT_SKIP = 1 RESW = 640 Set camera resolution RESH = 480 Set camera resolution