TCPIP read mclpower
Reads the power reading from an attached Mini-Circuits power meter. The power meter must be connected to the USB port on the rear of the radio. The power is sample for 1/2-second before the reading is provided so this command will consume a half-second of wall clock minimum. Providing the frequency in MHz is optional (see MCL power meter software guide for details on when or why this may be necessary).
C[D]<seq_number>|read_mclpower <frequency_MHz>
Example:
C19|read_mclpower 14
See Response Format for details on the format of the response messages from the radio
| Hex Response | Message | Debug Output / Meaning |
|---|---|---|
| 00000000 | OK | |
| 5000008D | Power meter not successfully read or not connected |
Responses
is the value in dBm read from the power meter and may be positive or negative
Response Example:
R19|0|-10.11
