Basic build

The basic Fochica build supports a maximum of one parent connected at the same time, one child seat with two specific sensors; a capacitive sensor and an on/off sensor at the chest buckle. This is the recommended build to start with, especially for beginners.

This build requires no or minimal change to be used with the default Fochica Arduino code.

Requirements

Skills

• Basic Arduino experience. Specifically with the Uno. It is assumed you know how to build basic circuits and upload sketches/code. If this is your first Arduino project look at the getting started guide.
• Basic Soldering skills are recommended. Preferably you will solder connections where relevant but you can also twist wires, use connectors, secure stuff with electrical/sticky tape and use a breadboard. Just understand that your connections might be less reliable if you are unable to solder.

Equipment

• PC with the Arduino suite - for programming the Arduino
• Android smartphone with Bluetooth Low Energy (BLE) - for interfacing with the device
  • iOS support is in the roadmap, please [sign up for a notification when it is available](Currently free on Google Play)

Tools

• Digital Multi Meter - highly recommended - to troubleshoot the circuit and to measure values of parts
• Soldering tools - recommended - for making good electrical connections
• Crimper and crimp plugs or connectors of various size - optional - might be useful for connecting parts

Parts

Some parts link to a part selection guide for that specific part.

• Arduino Uno - can be any working Arduino Uno or a clone
• TODO