Repository navigation
EUSBASPI 0.11
Changes since 0.10 (forum report 325579, from USBlyzer captures):
- IS902E and INICD: READ TOC in MSF. The drive answers READ TOC in MSF format even when the driver asks for LBA: track 1 comes back as
00 00 02 00(00:02:00), which read as LBA is 512. INICD then looked for the volume descriptor at sector 528 and got lost. Track 1 of a CD always starts at LBA 0, so EUSBASPI now recognises such a drive by this answer and converts its TOC answers to LBA from then on. - SK6221: port reset at once. A drive that does not even take the bulk-only reset no longer gets its two endpoint halts cleared (5 s each under VMware) and two more wake-up rounds; with
/Hits USB port is reset at once, as Linux does. In the capture the wake-up took about 55 s before the port reset; now about 2 s. - Empty hot plug slots are listed at start ("ID 1:Lun 0 empty USB slot (/H)"). ASPIDISK and ASPIFDD give them a drive letter so that a device plugged in later gets one; that looked like a phantom device.
/H:1makes only one slot. - ASPITEST checks READ TOC (LBA and MSF, session info, lead-out) on CD drives.
- The package contains the OpenASPI drivers of 0.1.0 Alpha 8 (ASPIDSK
/I13), SHSUCDX and CDAUDIO from geosone/shsucd (76d847a), and the GeosOne DOS Installer 1.16.0.
Tested in QEMU with test builds that answer like the IS902E (INICD read sector 528 and saw nothing before; now DIR and TYPE work) and whose bulk-only reset fails (INICD reads again after the port reset). The test suites of 0.10 passed as well: QEMU (UHCI, OHCI, EHCI, xHCI), VirtualBox (OHCI, EHCI, xHCI).
Not yet tested on real hardware. Please test with care (backup!) and report.
🤖 Generated with Claude Code