Better dataset identification/selection

[vablings]

Hi,
I have a device where the output data is as so
[RECV] t + 210.359s: #,00:00:00 00/00/0000, , , .0862, ,N.m, VCX000002, 1
A feature for a custom separator would be pretty awesome

[hacknus]

@RoccoEE 's ' should already be implemented as separator. Can you post a screenshot of what the serial monitor is displaying?

[vablings]

[hacknus]

@RoccoEE sorry, I meant a full screenshot of the plot. The separator only matters for the plot. Below as text you always find the raw data that gets printed over serial.

[vablings]

Sorry yeah i updated the post after i re-read it

[hacknus]

@RoccoEE The plot should be showing once it detects 10 or more printed lines with the same structure.

[vablings]

Okay yeah just getting a flat line now. Says there is 4 detected datasets but theres only one plotline and box

edit: after pressing reset labels the other boxes appear :P

[hacknus]

@RoccoEE Seems like bug #80, try to hit the "Reset Labels" button and double click on the plot (to re-center).
What does the legend show in the plot?
it could be that the serial monitor is only able to parse the last line with the 1. Never tried to parse float without the leading 0 (e.g. .0136).

[vablings]

Okay seems like I got the floats working
Depending on the device settings it spits out the torque reading a bit differently

[RECV] t + 32.074s: #,00:00:00 00/00/0000,          ,          ,         ,    .1956,N.m, VCX000002, 1
[RECV] t + 84.074s: #,00:00:00 00/00/0000,          ,          ,         ,    .5320,N.m, VCX000002, 1
[RECV] t + 88.375s: #,00:00:00 00/00/0000,          ,          ,         ,    .5758,N.m, VCX000002, 1
[RECV] t + 96.476s: #,00:00:00 00/00/0000,          ,          ,         ,    .3826,N.m, VCX000002, 1
[RECV] t + 101.154s: #,00:00:00 00/00/0000,          ,          ,         ,    .0410,N.m, VCX000002, 1
[RECV] t + 115.537s: #,00:00:00 00/00/0000,          ,          ,    .2528,         ,N.m, VCX000002, 1
[RECV] t + 119.462s: #,00:00:00 00/00/0000,          ,          ,    .2357,         ,N.m, VCX000002, 1
[RECV] t + 121.615s: #,00:00:00 00/00/0000,          ,          ,    .0754,         ,N.m, VCX000002, 1
[RECV] t + 124.007s: #,00:00:00 00/00/0000,          ,          ,    .0394,         ,N.m, VCX000002, 1
[RECV] t + 126.772s: #,00:00:00 00/00/0000,          ,          ,    .1937,         ,N.m, VCX000002, 1

The other blank areas are for what type of measurement mode its in. Possibly need something to reset the saved config for that device?

[hacknus]

What kind of device settings did you adjust?
Agreed, we should implement the possibility to reset the saved config file.

[vablings]

[RECV] t + 126.772s: #,00:00:00 00/00/0000,          ,          ,    .1937,         ,N.m, VCX000002, 1
							^cont     ^peak     ^1st

Depending on the device setting the data will be spat out into each of those fields

[hacknus]

@RoccoEE Do you mean a setting on the device itself (hardware) or a setting on the Serial Monitor (e.g. baud rate etc) ?

[vablings]

Apologies yeah a setting on the device.

[hacknus]

Since this seems to be an issue on the device-side I'm closing this issue.