Cheap Yellow Display "Sketch too Big" ?

[RafaDom]

Hi, I followed all the steps and got galagino going on a CYD 👍 ... but, not until I commented out 1942 game in config.h (// #define ENABLE_1942 - line 10)
Otherwise, when compiling I get: "Sketch too big; ..... Sketch uses 1335229 bytes (101%) of program storage space. Maximum is 1310720 bytes."
Am I the only one getting this? Thanks - Fantastic work btw.

[ReinerZ]

try it with the board type LOLIN D32 ...

[harbaum]

This may actually happen if the esp32 tool chain gets updated and e.g. a library is now slightly bigger. There are several possibilities to deal with this:

a) disable a game like you did
b) try older tool chains (select older esp32 support in the board manager)
c) Change the "partition scheme" in the Tools menu to increase the flash space for the app

The later is probably the most useful solution. Please report if that helps, so I can add that to the readme

[baggius]

On Arduino IDE with latest 3.1.1 ESP32 Arduino boards I choosed "ESP32-2432S028 CYD" board and then changed "Partition Scheme" to an higher value then default of 1.2M for APP space, for example Max APP (4MB APP no OTA).
This should work.

[fedekrum]

I had this issue and @baggius is right. That fixed the upload problem. This issue can be closed.