Skip to content

layerling 1.126.0

Choose a tag to compare

@henmedia henmedia released this 31 Oct 06:47
· 1219 commits to main since this release
  • Alignment handles stay next to a tiny part when you zoom in (Discussion #989): The line of alignment handles stood a fixed 3 mm beside the selection, so on a part below a millimetre zoomed in to fill the view the handles landed far off it or off the screen. On the screen the line now stands at most 40 pixels beside the selection, in the same direction; normal views are unchanged. Asked for by @rickmb66 in Discussion #989, after the same change for the size marks.

  • Search words marked on the guide page (Discussion #1059): The guide search marked the words only in its list of results; the page a result opened showed them nowhere, and on a long page they were hard to find. Now the page marks every place the words appear, in the same way the search matches them (capital letters, accents, "ss" and "ß" and parts of words alike; single letters are left out when longer words are typed), and scrolls to the first one in the section that was picked, also when the result is on the page already open. Esc or a click on a mark clears them, and a printout leaves them out. Suggested by @boatingman44.

  • The right-click menu scrolls with the wheel (Discussion #1058): A menu taller than the window could only be scrolled by dragging its scroll bar; turning the wheel over it closed it, because every turn of the wheel anywhere closed the menu. The wheel over the menu now scrolls it, and only the wheel elsewhere closes it. Reported by @dlguess in Discussion #1058.

  • Offset sideways only (Discussion #1057): The Offset tool moved every face, so growing a sign or a base by a border all round also made it taller by twice the distance. A new tick, Sides only, moves just the sides: every flat top and bottom stays at its height, and on a stepped body each step keeps its own. It works for grow and shrink, with round or sharp corners and as a hole copy; Edit opens it ticked again. The MCP bridge takes sideways on layerling_offset_object. Asked for by @MethylBromide in Discussion #1057.

  • Chamfer, fillet, hollow, offset and delete face work on a hole, and a hull of holes is a hole (Discussion #1055): These tools refused anything set as a hole, a rule that came along from the fork without a reason, so a pocket with round inside corners meant making the box solid, rounding it and making it a hole again. They now take a hole as it is and it stays a hole; the CAD worker builds a hole on its own (or a group of holes only) like a solid. Hull of holes only gives a hole, so two cylinder holes cut a slot; with a solid in the selection the holes are still cut out of the hull. The cookie cutter takes a hole's own outline instead of finding none, and its parts are always solids. Lid, flexi joints, hole pattern and the face tool stay off for a hole. Reported by @MethylBromide in Discussion #1055.

  • Slotted screws and washers (Discussion #1052): A screw takes a slot as its drive as well, for a flat screwdriver or a coin: its size is the slot's length, its width a fifth of it, and it starts as long as the head allows. A round tube offers the washer of each metric screw size from M1.6 to M30 under Washer, which sets outer and inner diameter and thickness to ISO 7089 (normal series) in one go; a tube with those measures shows its size. The MCP bridge takes threadDrive: "slot" and a washer size when creating a tube.

  • Robertson drive: A screw takes the square Robertson drive common in Canada as well. Its size is the square across flats and starts at the bit for the thread, from #00 (1.3 mm) on the smallest to #4 (4.83 mm) on M8 and up - #2 (2.84 mm) on M4 and M5. The socket is cut straight, without the slight taper of a real one. The MCP bridge takes threadDrive: "robertson".

  • undici 8.12.3: The test-only dependency undici (through jsdom) moves from 8.11.2 to 8.12.3. Pointed out by @WC3D in PR #1063.