Home Assistant OS 18.2

[agners]

Home Assistant OS 18.2 is a minor release fixing various bugs and smaller caveats. It mainly resolves networking (custom MTU) issues on Home Assistant Green and resolves eMMC/booting issues on Hardkernel ODROID-N2+. It also improves the update system integration on Raspberry Pi 5, making sure that the OS (pending) version is correctly reflected right after an update. It contains Buildroot update to 2025.02.16 which includes various security fixes and updates Docker to 29.6.2 as well.

All users are recommended to update to this Home Assistant OS release.

Read the HAOS 18.0 release notes for the noteworthy changes in this major release.

Home Assistant Operating System

• Keep Dropbear alive during Supervisor and Docker shutdown (Keep Dropbear alive during Supervisor and Docker shutdown #4923) @agners, @claude
• Do not start Supervisor from HA CLI and serial getty units (Do not start Supervisor from HA CLI and serial getty units #4918) @agners, @claude
• Enable CONFIG_USB_SERIAL_XR (MaxLinear/Exar USB-to-serial) (Enable CONFIG_USB_SERIAL_XR (MaxLinear/Exar USB-to-serial) #4915) @joelmansford
• Adapt OS update test to Supervisor no longer auto-rebooting (Adapt OS update test to Supervisor no longer auto-rebooting #4906) @agners, @claude
• Fix offline connectivity test for fancy busybox ping (Fix offline connectivity test for fancy busybox ping #4905) @agners, @claude
• Bump Buildroot to 2025.02.16 and Docker to 29.6.2 (Bump Buildroot to 2025.02.16 and Docker to 29.6.2 #4903) @agners
• Bump OS Agent to v1.10.0 (Bump OS Agent to v1.10.0 #4897) @agners
• Enable CONNMARK netfilter target and match support (Enable CONNMARK netfilter target and match support #4890) @agners, @claude
• Make Supervisor startup resilient to transient network failures (Make Supervisor startup resilient to transient network failures #4874) @agners, @claude, @Copilot
• Enable CONFIG_FEATURE_VERBOSE_USAGE in busybox (Enable CONFIG_FEATURE_VERBOSE_USAGE in busybox #4853) @mhansen
• Enable CONFIG_WHICH in busybox (Enable CONFIG_WHICH in busybox #4855) @mhansen
• Enable CONFIG_FEATURE_FANCY_PING in busybox (Enable CONFIG_FEATURE_FANCY_PING in busybox #4854) @mhansen

Raspberry Pi

• raspberrypi: Ignore UAS for Crucial X9 SSD (0634:5605) (raspberrypi: Ignore UAS for Crucial X9 SSD (0634:5605) #4893) @agners, @claude
• Make RAUC tryboot backend report staged updates on RPi 5 (Make RAUC tryboot backend report staged updates on RPi 5 #4888) @agners, @claude

Home Assistant Green

• Linux: Update kernel to 6.18.39 (Linux: Update kernel to 6.18.39 #4904) @agners
• Fix Ethernet failure after runtime MTU change on stmmac devices (Fix Ethernet failure after runtime MTU change on stmmac devices #4876) @agners, @claude

Open Virtual Appliance

• Linux: Update kernel to 6.18.39 (Linux: Update kernel to 6.18.39 #4904) @agners

Generic x86-64

• Enable Apple SMC hardware monitoring support (Enable Apple SMC hardware monitoring support #4912) @KingKaom
• Enable Intel RAPL / powercap on generic-x86-64 (Enable Intel RAPL / powercap on generic-x86-64 #4908) @agners, @claude
• Linux: Update kernel to 6.18.39 (Linux: Update kernel to 6.18.39 #4904) @agners
• Enable Intel LPSS I2C for integrated touchscreens (Enable Intel LPSS I2C for integrated touchscreens #4900) @angelolsantos, @agners, @cursoragent
• Enable Intel VMD support for generic x86-64 (Enable Intel VMD support for generic x86-64 #4902) @andreabosman16, @codex

Hardkernel ODROID

• Linux: Update kernel to 6.18.39 (Linux: Update kernel to 6.18.39 #4904) @agners
• ODROID-N2: Revert U-Boot "meson_gx_mmc: reduce maximum frequency" (ODROID-N2: Revert U-Boot "meson_gx_mmc: reduce maximum frequency" #4878) @agners, @claude
• Fix Ethernet failure after runtime MTU change on stmmac devices (Fix Ethernet failure after runtime MTU change on stmmac devices #4876) @agners, @claude

Khadas VIM Series

• Linux: Update kernel to 6.18.39 (Linux: Update kernel to 6.18.39 #4904) @agners

Generic aarch64

• Linux: Update kernel to 6.18.39 (Linux: Update kernel to 6.18.39 #4904) @agners

Dependencies

• Bump docker/login-action from 4.4.0 to 4.5.1 (Bump docker/login-action from 4.4.0 to 4.5.1 #4921) @dependabot[bot]
• Bump actions/checkout from 7.0.0 to 7.0.1 (Bump actions/checkout from 7.0.0 to 7.0.1 #4920) @dependabot[bot]
• Bump release-drafter/release-drafter from 7.5.1 to 7.6.0 (Bump release-drafter/release-drafter from 7.5.1 to 7.6.0 #4909) @dependabot[bot]
• Bump actions/setup-python from 6.3.0 to 7.0.0 (Bump actions/setup-python from 6.3.0 to 7.0.0 #4910) @dependabot[bot]
• Bump actions/stale from 10.3.0 to 10.4.0 (Bump actions/stale from 10.3.0 to 10.4.0 #4895) @dependabot[bot]
• Bump docker/setup-buildx-action from 4.1.0 to 4.2.0 (Bump docker/setup-buildx-action from 4.1.0 to 4.2.0 #4873) @dependabot[bot]
• Bump docker/login-action from 4.2.0 to 4.4.0 (Bump docker/login-action from 4.2.0 to 4.4.0 #4872) @dependabot[bot]
• Bump docker/build-push-action from 7.2.0 to 7.3.0 (Bump docker/build-push-action from 7.2.0 to 7.3.0 #4871) @dependabot[bot]

---

This discussion was created from the release Home Assistant OS 18.2.