[pull] master from torvalds:master#208
Merged
pull[bot] merged 33 commits intohx210:masterfrom Dec 29, 2024
Merged
Conversation
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a RISCV platform which does not provide PCI/MSI support: WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32 __pci_enable_msix_range+0x30c/0x596 pci_msi_setup_msi_irqs+0x2c/0x32 pci_alloc_irq_vectors_affinity+0xb8/0xe2 RISCV uses hierarchical interrupt domains and correctly does not implement the legacy fallback. The warning triggers from the legacy fallback stub. That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent domain is associated with the device or not. There is a check for MSI-X, which has a legacy assumption. But that legacy fallback assumption is only valid when legacy support is enabled, but otherwise the check should simply return -ENOTSUPP. Loongarch tripped over the same problem and blindly enabled legacy support without implementing the legacy fallbacks. There are weak implementations which return an error, so the problem was papered over. Correct pci_msi_domain_supports() to evaluate the legacy mode and add the missing supported check into the MSI enable path to complete it. Fixes: d2a463b ("PCI/MSI: Reject multi-MSI early") Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/87ed2a8ow5.ffs@tglx
From the perspective of the uncore PMU, the Clearwater Forest is the same as the previous Sierra Forest. The only difference is the event list, which will be supported in the perf tool later. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20241211161146.235253-1-kan.liang@linux.intel.com
The only difference between 5 and 6 is the new counters snapshotting group, without the following counters snapshotting enabling patches, it's impossible to utilize the feature in a PEBS record. It's safe to share the same code path with format 5. Add format 6, so the end user can at least utilize the legacy PEBS features. Fixes: a932aa0 ("perf/x86: Add Lunar Lake and Arrow Lake support") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20241216204505.748363-1-kan.liang@linux.intel.com
…ease the lock->wait_lock Bert reported seeing occasional boot hangs when running with PREEPT_RT and bisected it down to commit 894d1b3 ("locking/mutex: Remove wakeups from under mutex::wait_lock"). It looks like I missed a few spots where we drop the wait_lock and potentially call into schedule without waking up the tasks on the wake_q structure. Since the tasks being woken are ww_mutex tasks they need to be able to run to release the mutex and unblock the task that currently is planning to wake them. Thus we can deadlock. So make sure we wake the wake_q tasks when we unlock the wait_lock. Closes: https://lore.kernel.org/lkml/20241211182502.2915-1-spasswolf@web.de Fixes: 894d1b3 ("locking/mutex: Remove wakeups from under mutex::wait_lock") Reported-by: Bert Karwatzki <spasswolf@web.de> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20241212222138.2400498-1-jstultz@google.com
The released OCR and FRONTEND events utilized more bits on Lunar Lake p-core. The corresponding mask in the extra_regs has to be extended to unblock the extra bits. Add a dedicated intel_lnc_extra_regs. Fixes: a932aa0 ("perf/x86: Add Lunar Lake and Arrow Lake support") Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20241216160252.430858-1-kan.liang@linux.intel.com
Fix a use-after-free in the I/O completion path for encoded reads by using a completion instead of a wait_queue for synchronizing the destruction of 'struct btrfs_encoded_read_private'. Fixes: 1881fba ("btrfs: add BTRFS_IOC_ENCODED_READ ioctl") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
When a COWing a tree block, at btrfs_cow_block(), and we have the tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled (CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent buffer while inside the tracepoint code. This is because in some paths that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding the last reference on the extent buffer @buf so btrfs_force_cow_block() drops the last reference on the @buf extent buffer when it calls free_extent_buffer_stale(buf), which schedules the release of the extent buffer with RCU. This means that if we are on a kernel with preemption, the current task may be preempted before calling trace_btrfs_cow_block() and the extent buffer already released by the time trace_btrfs_cow_block() is called, resulting in a use-after-free. Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to btrfs_force_cow_block() before the COWed extent buffer is freed. This also has a side effect of invoking the tracepoint in the tree defrag code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is called there, but this is fine and it was actually missing there. Reported-by: syzbot+8517da8635307182c8a5@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/6759a9b9.050a0220.1ac542.000d.GAE@google.com/ CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
When we call btrfs_read_folio() to bring a folio uptodate, we unlock the folio. The result of that is that a different thread can modify the mapping (like remove it with invalidate) before we call folio_lock(). This results in an invalid page and we need to try again. In particular, if we are relocating concurrently with aborting a transaction, this can result in a crash like the following: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 76 PID: 1411631 Comm: kworker/u322:5 Workqueue: events_unbound btrfs_reclaim_bgs_work RIP: 0010:set_page_extent_mapped+0x20/0xb0 RSP: 0018:ffffc900516a7be8 EFLAGS: 00010246 RAX: ffffea009e851d08 RBX: ffffea009e0b1880 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc900516a7b90 RDI: ffffea009e0b1880 RBP: 0000000003573000 R08: 0000000000000001 R09: ffff88c07fd2f3f0 R10: 0000000000000000 R11: 0000194754b575be R12: 0000000003572000 R13: 0000000003572fff R14: 0000000000100cca R15: 0000000005582fff FS: 0000000000000000(0000) GS:ffff88c07fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000407d00f002 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die+0x78/0xc0 ? page_fault_oops+0x2a8/0x3a0 ? __switch_to+0x133/0x530 ? wq_worker_running+0xa/0x40 ? exc_page_fault+0x63/0x130 ? asm_exc_page_fault+0x22/0x30 ? set_page_extent_mapped+0x20/0xb0 relocate_file_extent_cluster+0x1a7/0x940 relocate_data_extent+0xaf/0x120 relocate_block_group+0x20f/0x480 btrfs_relocate_block_group+0x152/0x320 btrfs_relocate_chunk+0x3d/0x120 btrfs_reclaim_bgs_work+0x2ae/0x4e0 process_scheduled_works+0x184/0x370 worker_thread+0xc6/0x3e0 ? blk_add_timer+0xb0/0xb0 kthread+0xae/0xe0 ? flush_tlb_kernel_range+0x90/0x90 ret_from_fork+0x2f/0x40 ? flush_tlb_kernel_range+0x90/0x90 ret_from_fork_asm+0x11/0x20 </TASK> This occurs because cleanup_one_transaction() calls destroy_delalloc_inodes() which calls invalidate_inode_pages2() which takes the folio_lock before setting mapping to NULL. We fail to check this, and subsequently call set_extent_mapping(), which assumes that mapping != NULL (in fact it asserts that in debug mode) Note that the "fixes" patch here is not the one that introduced the race (the very first iteration of this code from 2009) but a more recent change that made this particular crash happen in practice. Fixes: e7f1326 ("btrfs: set page extent mapped after read_folio in relocate_one_page") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
When we call btrfs_read_folio() we get an unlocked folio, so it is possible for a different thread to concurrently modify folio->mapping. We must check that this hasn't happened once we do have the lock. CC: stable@vger.kernel.org # 6.12+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
When activating the swap file we flush all delalloc and wait for ordered extent completion, so that we don't miss any delalloc and extents before we check that the file's extent layout is usable for a swap file and activate the swap file. We are called with the inode's VFS lock acquired, so we won't race with buffered and direct IO writes, however we can still race with memory mapped writes since they don't acquire the inode's VFS lock. The race window is between flushing all delalloc and locking the whole file's extent range, since memory mapped writes lock an extent range with the length of a page. Fix this by acquiring the inode's mmap lock before we flush delalloc. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
…e shared
When activating a swap file, to determine if an extent is shared we use
can_nocow_extent(), which ends up at btrfs_cross_ref_exist(). That helper
is meant to be quick because it's used in the NOCOW write path, when
flushing delalloc and when doing a direct IO write, however it does return
some false positives, meaning it may indicate that an extent is shared
even if it's no longer the case. For the write path this is fine, we just
do a unnecessary COW operation instead of doing a more rigorous check
which would be too heavy (calling btrfs_is_data_extent_shared()).
However when activating a swap file, the false positives simply result
in a failure, which is confusing for users/applications. One particular
case where this happens is when a data extent only has 1 reference but
that reference is not inlined in the extent item located in the extent
tree - this happens when we create more than 33 references for an extent
and then delete those 33 references plus every other non-inline reference
except one. The function check_committed_ref() assumes that if the size
of an extent item doesn't match the size of struct btrfs_extent_item
plus the size of an inline reference (plus an owner reference in case
simple quotas are enabled), then the extent is shared - that is not the
case however, we can have a single reference but it's not inlined - the
reason we do this is to be fast and avoid inspecting non-inline references
which may be located in another leaf of the extent tree, slowing down
write paths.
The following test script reproduces the bug:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
NUM_CLONES=50
umount $DEV &> /dev/null
run_test()
{
local sync_after_add_reflinks=$1
local sync_after_remove_reflinks=$2
mkfs.btrfs -f $DEV > /dev/null
#mkfs.xfs -f $DEV > /dev/null
mount $DEV $MNT
touch $MNT/foo
chmod 0600 $MNT/foo
# On btrfs the file must be NOCOW.
chattr +C $MNT/foo &> /dev/null
xfs_io -s -c "pwrite -b 1M 0 1M" $MNT/foo
mkswap $MNT/foo
for ((i = 1; i <= $NUM_CLONES; i++)); do
touch $MNT/foo_clone_$i
chmod 0600 $MNT/foo_clone_$i
# On btrfs the file must be NOCOW.
chattr +C $MNT/foo_clone_$i &> /dev/null
cp --reflink=always $MNT/foo $MNT/foo_clone_$i
done
if [ $sync_after_add_reflinks -ne 0 ]; then
# Flush delayed refs and commit current transaction.
sync -f $MNT
fi
# Remove the original file and all clones except the last.
rm -f $MNT/foo
for ((i = 1; i < $NUM_CLONES; i++)); do
rm -f $MNT/foo_clone_$i
done
if [ $sync_after_remove_reflinks -ne 0 ]; then
# Flush delayed refs and commit current transaction.
sync -f $MNT
fi
# Now use the last clone as a swap file. It should work since
# its extent are not shared anymore.
swapon $MNT/foo_clone_${NUM_CLONES}
swapoff $MNT/foo_clone_${NUM_CLONES}
umount $MNT
}
echo -e "\nTest without sync after creating and removing clones"
run_test 0 0
echo -e "\nTest with sync after creating clones"
run_test 1 0
echo -e "\nTest with sync after removing clones"
run_test 0 1
echo -e "\nTest with sync after creating and removing clones"
run_test 1 1
Running the test:
$ ./test.sh
Test without sync after creating and removing clones
wrote 1048576/1048576 bytes at offset 0
1 MiB, 1 ops; 0.0017 sec (556.793 MiB/sec and 556.7929 ops/sec)
Setting up swapspace version 1, size = 1020 KiB (1044480 bytes)
no label, UUID=a6b9c29e-5ef4-4689-a8ac-bc199c750f02
swapon: /mnt/sdi/foo_clone_50: swapon failed: Invalid argument
swapoff: /mnt/sdi/foo_clone_50: swapoff failed: Invalid argument
Test with sync after creating clones
wrote 1048576/1048576 bytes at offset 0
1 MiB, 1 ops; 0.0036 sec (271.739 MiB/sec and 271.7391 ops/sec)
Setting up swapspace version 1, size = 1020 KiB (1044480 bytes)
no label, UUID=5e9008d6-1f7a-4948-a1b4-3f30aba20a33
swapon: /mnt/sdi/foo_clone_50: swapon failed: Invalid argument
swapoff: /mnt/sdi/foo_clone_50: swapoff failed: Invalid argument
Test with sync after removing clones
wrote 1048576/1048576 bytes at offset 0
1 MiB, 1 ops; 0.0103 sec (96.665 MiB/sec and 96.6651 ops/sec)
Setting up swapspace version 1, size = 1020 KiB (1044480 bytes)
no label, UUID=916c2740-fa9f-4385-9f06-29c3f89e4764
Test with sync after creating and removing clones
wrote 1048576/1048576 bytes at offset 0
1 MiB, 1 ops; 0.0031 sec (314.268 MiB/sec and 314.2678 ops/sec)
Setting up swapspace version 1, size = 1020 KiB (1044480 bytes)
no label, UUID=06aab1dd-4d90-49c0-bd9f-3a8db4e2f912
swapon: /mnt/sdi/foo_clone_50: swapon failed: Invalid argument
swapoff: /mnt/sdi/foo_clone_50: swapoff failed: Invalid argument
Fix this by reworking btrfs_swap_activate() to instead of using extent
maps and checking for shared extents with can_nocow_extent(), iterate
over the inode's file extent items and use the accurate
btrfs_is_data_extent_shared().
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During swap activation we iterate over the extents of a file, then do several checks for each extent, some of which may take some significant time such as checking if an extent is shared. Since a file can have many thousands of extents, this can be a very slow operation and it's currently not interruptible. I had a bug during development of a previous patch that resulted in an infinite loop when iterating the extents, so a core was busy looping and I couldn't cancel the operation, which is very annoying and requires a reboot. So make the loop interruptible by checking for fatal signals at the end of each iteration and stopping immediately if there is one. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
During swap activation we iterate over the extents of a file and we can have many thousands of them, so we can end up in a busy loop monopolizing a core. Avoid this by doing a voluntary reschedule after processing each extent. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Set squota incompat bit before committing the transaction that enables the feature. With the config CONFIG_BTRFS_ASSERT enabled, an assertion failure occurs regarding the simple quota feature. [5.596534] assertion failed: btrfs_fs_incompat(fs_info, SIMPLE_QUOTA), in fs/btrfs/qgroup.c:365 [5.597098] ------------[ cut here ]------------ [5.597371] kernel BUG at fs/btrfs/qgroup.c:365! [5.597946] CPU: 1 UID: 0 PID: 268 Comm: mount Not tainted 6.13.0-rc2-00031-gf92f4749861b #146 [5.598450] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [5.599008] RIP: 0010:btrfs_read_qgroup_config+0x74d/0x7a0 [5.604303] <TASK> [5.605230] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.605538] ? exc_invalid_op+0x56/0x70 [5.605775] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606066] ? asm_exc_invalid_op+0x1f/0x30 [5.606441] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606741] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.607038] ? try_to_wake_up+0x317/0x760 [5.607286] open_ctree+0xd9c/0x1710 [5.607509] btrfs_get_tree+0x58a/0x7e0 [5.608002] vfs_get_tree+0x2e/0x100 [5.608224] fc_mount+0x16/0x60 [5.608420] btrfs_get_tree+0x2f8/0x7e0 [5.608897] vfs_get_tree+0x2e/0x100 [5.609121] path_mount+0x4c8/0xbc0 [5.609538] __x64_sys_mount+0x10d/0x150 The issue can be easily reproduced using the following reproducer: root@q:linux# cat repro.sh set -e mkfs.btrfs -q -f /dev/sdb mount /dev/sdb /mnt/btrfs btrfs quota enable -s /mnt/btrfs umount /mnt/btrfs mount /dev/sdb /mnt/btrfs The issue is that when enabling quotas, at btrfs_quota_enable(), we set BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE at fs_info->qgroup_flags and persist it in the quota root in the item with the key BTRFS_QGROUP_STATUS_KEY, but we only set the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA after we commit the transaction used to enable simple quotas. This means that if after that transaction commit we unmount the filesystem without starting and committing any other transaction, or we have a power failure, the next time we mount the filesystem we will find the flag BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE set in the item with the key BTRFS_QGROUP_STATUS_KEY but we will not find the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA set in the superblock, triggering an assertion failure at: btrfs_read_qgroup_config() -> qgroup_read_enable_gen() To fix this issue, set the BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA flag immediately after setting the BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE. This ensures that both flags are flushed to disk within the same transaction. Fixes: 182940f ("btrfs: qgroup: add new quota mode for simple quotas") CC: stable@vger.kernel.org # 6.6+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Julian Sun <sunjunchao2870@gmail.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
The following sysfs entries are reading super block member directly, which can have a different endian and cause wrong values: - sys/fs/btrfs/<uuid>/nodesize - sys/fs/btrfs/<uuid>/sectorsize - sys/fs/btrfs/<uuid>/clone_alignment Thankfully those values (nodesize and sectorsize) are always aligned inside the btrfs_super_block, so it won't trigger unaligned read errors, just endian problems. Fix them by using the native cached members instead. Fixes: df93589 ("btrfs: export more from FS_INFO to sysfs") CC: stable@vger.kernel.org Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
A regression was introduced with the implementation of single-master mode, preventing proper stop conditions from being generated. Devices that require a valid stop condition, such as EEPROMs, fail to function correctly as a result. The issue only affects devices with the single-master property enabled. This commit resolves the issue by re-enabling I2C bus busy bit (IBB) polling for single-master mode when generating a stop condition. The fix further ensures that the i2c_imx->stopped flag is cleared at the start of each transfer, allowing the stop condition to be correctly generated in i2c_imx_stop(). According to the reference manual (IMX8MMRM, Rev. 2, 09/2019, page 5270), polling the IBB bit to determine if the bus is free is only necessary in multi-master mode. Consequently, the IBB bit is not polled for the start condition in single-master mode. Fixes: 6692694 ("i2c: imx: do not poll for bus busy in single master mode") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20241216151829.74056-1-eichest@gmail.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver compatible string table, at the result, "fsl,imx21-i2c" will be matched, but it will cause erratum ERR007805 not be applied in fact. So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply the erratum ERR007805(https://www.nxp.com/docs/en/errata/IMX7DS_3N09P.pdf). " ERR007805 I2C: When the I2C clock speed is configured for 400 kHz, the SCL low period violates the I2C spec of 1.3 uS min Description: When the I2C module is programmed to operate at the maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL clock low period violates the I2C spec of 1.3 uS min. The user must reduce the clock speed to obtain the SCL low time to meet the 1.3us I2C minimum required. This behavior means the SoC is not compliant to the I2C spec at 400kHz. Workaround: To meet the clock low period requirement in fast speed mode, SCL must be configured to 384KHz or less. " "fsl,imx7d-i2c" already is documented in binding doc. This erratum fix has been included in imx6_i2c_hwdata and it is the same in all I.MX6/7/8, so just reuse it. Fixes: 39c0257 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit") Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Fixes: 39c0257 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit") Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20241218044238.143414-1-carlos.song@nxp.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
At present, where repeated sends are intended to be used, the i2c-microchip-core driver sends a stop followed by a start. Lots of i2c devices must not malfunction in the face of this behaviour, because the driver has operated like this for years! Try to keep track of whether or not a repeated send is required, and suppress sending a stop in these cases. CC: stable@vger.kernel.org Fixes: 64a6f1c ("i2c: add support for microchip fpga i2c controllers") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20241218-football-composure-e56df2461461@spud Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Running i2c-detect currently produces an output akin to:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- 0a -- 0c -- 0e --
10: 10 -- 12 -- 14 -- 16 -- UU 19 -- 1b -- 1d -- 1f
20: -- 21 -- 23 -- 25 -- 27 -- 29 -- 2b -- 2d -- 2f
30: -- -- -- -- -- -- -- -- 38 -- 3a -- 3c -- 3e --
40: 40 -- 42 -- 44 -- 46 -- 48 -- 4a -- 4c -- 4e --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: 60 -- 62 -- 64 -- 66 -- 68 -- 6a -- 6c -- 6e --
70: 70 -- 72 -- 74 -- 76 --
This happens because for an i2c_msg with a len of 0 the driver will
mark the transmission of the message as a success once the START has
been sent, without waiting for the devices on the bus to respond with an
ACK/NAK. Since i2cdetect seems to run in a tight loop over all addresses
the NAK is treated as part of the next test for the next address.
Delete the fast path that marks a message as complete when idev->msg_len
is zero after sending a START/RESTART since this isn't a valid scenario.
CC: stable@vger.kernel.org
Fixes: 64a6f1c ("i2c: add support for microchip fpga i2c controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241218-outbid-encounter-b2e78b1cc707@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
…inux/kernel/git/andi.shyti/linux into i2c/for-current i2c-host-fixes for v6.13-rc5 - IMX: fixed stop condition in single master mode and added compatible string for errata adherence. - Microchip: Added support for proper repeated sends and fixed unnecessary NAKs on empty messages, which caused false bus detection.
Fix the following objtool warning during build time:
fs/bcachefs/btree_trans_commit.o: warning: objtool: bch2_trans_commit_write_locked.isra.0() falls through to next function do_bch2_trans_commit.isra.0()
fs/bcachefs/btree_trans_commit.o: warning: objtool: .text: unexpected end of section
......
fs/bcachefs/btree_update.o: warning: objtool: bch2_trans_update_get_key_cache() falls through to next function flush_new_cached_update()
fs/bcachefs/btree_update.o: warning: objtool: flush_new_cached_update() falls through to next function bch2_trans_update_by_path()
bch2_trans_unlocked_error() is an Obviously Correct (tm) panic() wrapper,
add it to the list of known noreturns.
[ mingo: Improved the changelog ]
Fixes: fd104e2 ("bcachefs: bch2_trans_verify_not_unlocked()")
Signed-off-by: chenchangcheng <chenchangcheng@kylinos.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20241220074847.3418134-1-ccc194101@163.com
Before commit: f5d39b0 ("freezer,sched: Rewrite core freezer logic") the frozen task stat was reported as 'D' in cgroup v1. However, after rewriting the core freezer logic, the frozen task stat is reported as 'R'. This is confusing, especially when a task with stat of 'S' is frozen. This bug can be reproduced with these steps: $ cd /sys/fs/cgroup/freezer/ $ mkdir test $ sleep 1000 & [1] 739 // task whose stat is 'S' $ echo 739 > test/cgroup.procs $ echo FROZEN > test/freezer.state $ ps -aux | grep 739 root 739 0.1 0.0 8376 1812 pts/0 R 10:56 0:00 sleep 1000 As shown above, a task whose stat is 'S' was changed to 'R' when it was frozen. To solve this regression, simply maintain the same reported state as before the rewrite. [ mingo: Enhanced the changelog and comments ] Fixes: f5d39b0 ("freezer,sched: Rewrite core freezer logic") Signed-off-by: Chen Ridong <chenridong@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/20241217004818.3200515-1-chenridong@huaweicloud.com
An indirect branch instruction sets the CPU indirect branch tracker (IBT) into WAIT_FOR_ENDBRANCH (WFE) state and WFE stays asserted across the instruction boundary. When the decoder finds an inappropriate instruction while WFE is set ENDBR, the CPU raises a #CP fault. For the "kernel IBT no ENDBR" selftest where #CPs are deliberately triggered, the WFE state of the interrupted context needs to be cleared to let execution continue. Otherwise when the CPU resumes from the instruction that just caused the previous #CP, another missing-ENDBRANCH #CP is raised and the CPU enters a dead loop. This is not a problem with IDT because it doesn't preserve WFE and IRET doesn't set WFE. But FRED provides space on the entry stack (in an expanded CS area) to save and restore the WFE state, thus the WFE state is no longer clobbered, so software must clear it. Clear WFE to avoid dead looping in ibt_clear_fred_wfe() and the !ibt_fatal code path when execution is allowed to continue. Clobbering WFE in any other circumstance is a security-relevant bug. [ dhansen: changelog rewording ] Fixes: a5f6c2a ("x86/shstk: Add user control-protection fault handler") Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241113175934.3897541-1-xin%40zytor.com
In CoCo VMs it is possible for the untrusted host to cause set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. Leak the decrypted memory when set_memory_decrypted() fails, and don't need to print an error since set_memory_decrypted() will call WARN_ONCE(). Fixes: f4738f5 ("virt: tdx-guest: Add Quote generation support using TSM_REPORTS") Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240619111801.25630-1-lirongqing%40baidu.com
…rnel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - IMX: fix stop condition in single master mode and add compatible string for errata adherence - Microchip: Add support for proper repeated sends and fix unnecessary NAKs on empty messages, which caused false bus detection * tag 'i2c-for-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: microchip-core: fix "ghost" detections i2c: microchip-core: actually use repeated sends i2c: imx: add imx7d compatible string for applying erratum ERR007805 i2c: imx: fix missing stop condition in single-master mode
…rnel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes that accumulated over the last two weeks, fixing some
user reported problems:
- swapfile fixes:
- conditional reschedule in the activation loop
- fix race with memory mapped file when activating
- make activation loop interruptible
- rework and fix extent sharing checks
- folio fixes:
- in send, recheck folio mapping after unlock
- in relocation, recheck folio mapping after unlock
- fix waiting for encoded read io_uring requests
- fix transaction atomicity when enabling simple quotas
- move COW block trace point before the block gets freed
- print various sizes in sysfs with correct endianity"
* tag 'for-6.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs: fix direct super block member reads
btrfs: fix transaction atomicity bug when enabling simple quotas
btrfs: avoid monopolizing a core when activating a swap file
btrfs: allow swap activation to be interruptible
btrfs: fix swap file activation failure due to extents that used to be shared
btrfs: fix race with memory mapped writes when activating swap file
btrfs: check folio mapping after unlock in put_file_data()
btrfs: check folio mapping after unlock in relocate_one_folio()
btrfs: fix use-after-free when COWing tree bock and tracing is enabled
btrfs: fix use-after-free waiting for encoded read endios
…ux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "Fix bogus MSI IRQ setup warning on RISC-V" * tag 'irq-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Handle lack of irqdomain gracefully
…/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "Fix missed rtmutex wakeups causing sporadic boot hangs and other misbehavior" * tag 'locking-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Make sure we wake anything on the wake_q when we release the lock->wait_lock
…/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix false positive objtool build warning related to a noreturn function in the bcachefs code" * tag 'objtool-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Add bch2_trans_unlocked_error() to bcachefs noreturns
…nux/kernel/git/tip/tip Pull x86 perf fixes from Ingo Molnar: - Fix Intel Lunar Lake build-in event definitions - Fall back to (compatible) legacy features on new Intel PEBS format v6 hardware - Enable uncore support on Intel Clearwater Forest CPUs, which is the same as the existing Sierra Forest uncore driver * tag 'perf-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix bitmask of OCR and FRONTEND events for LNC perf/x86/intel/ds: Add PEBS format 6 perf/x86/intel/uncore: Add Clearwater Forest support
…ux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - Fix a hang in the "kernel IBT no ENDBR" self-test that may trigger on FRED systems, caused by incomplete FRED state cleanup in the #CP fault handler - Improve TDX (Coco VM) guest unrecoverable error handling to not potentially leak decrypted memory * tag 'x86-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt: tdx-guest: Just leak decrypted memory on unrecoverable errors x86/fred: Clear WFE in missing-ENDBRANCH #CPs
…inux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a procfs task state reporting regression when freezing sleeping tasks" * tag 'sched-urgent-2024-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: freezer, sched: Report frozen tasks as 'D' instead of 'R'
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
14 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot] (v2.0.0-alpha.1)
Can you help keep this open source service alive? 💖 Please sponsor : )