multi ticket

Multi-ticket support — Design Document

Status: Draft, 2026-05-24.

Summary

Multiple tickets can be in-flight in a single project at the same time. The currently selected ticket for any given working directory is determined unambiguously by the git branch name — the branch convention IS the selection mechanism. In-flight tickets carry a sub-state (active or blocked) and an optional parent linkage to another ticket. A low-ceremony entry path (:exp) lets the user create an experimental ticket and branch in one step, sidestepping the planning ceremony. The merge skill surfaces parent/subtask relationships as informational notes without blocking.

Motivation

The single-ticket model (CURRENT-$PREFIX pointer) breaks down in two everyday scenarios:

1. Blocked-then-switch. Mid-stream on MAZ-4, blocked by someone else's fix. Want to start MAZ-5 without losing MAZ-4's state, and resume MAZ-4 when the blocker clears.
2. Concurrent sessions on one ticket system. Two Claude Code sessions in different working trees (worktrees or clones), each on a different ticket in the same project.

Both reduce to "more than one ticket can be in-flight at once," with the question of which one each session is operating on.

Goals

• Allow multiple tickets to be in-flight simultaneously per project.
• Determine the currently selected ticket from the git branch — no separate session state, no prompts.
• Make ticket switching equivalent to checking out a different branch.
• Capture an explicit "blocked" sub-state with a recorded reason.
• Capture parent/subtask linkage at start time, and surface it as informational notes at merge time.
• Provide a single-command path (:exp) for low-ceremony experimental work that still produces a real ticket.

Non-goals

• Cross-project linkage. Parent/subtask relationships are within one ticket system.
• Enforcement of subtask completion before parent close. Notes only; never block.
• Silent upstream writes to other tickets. When a skill's primary action is on $TICKET but it also modifies a different ticket as a side effect (e.g. establishing a sub-issue link on the parent), the side-effect write requires explicit confirmation. Direct writes to $TICKET as part of the skill's main job — state transitions, comments, description edits — are not gated; the skill invocation is the consent.
• Resolving file-system races between two Claude sessions in the same cwd. That remains the user's responsibility.

State model

Three distinct concepts, previously collapsed into the singleton CURRENT-$PREFIX:

Concept	Scope	Encoded by
In-flight	Per project	Directory exists under ticket-active/$TICKET/
Selected	Per working tree	Git branch name
Active vs. blocked	Per in-flight ticket	state.toml inside the ticket dir

Plus, optionally on each ticket:

Concept	Scope	Encoded by
Parent linkage	Per in-flight ticket	parent field in state.toml (mirrors upstream where available)

"Archived" remains the terminal state — ticket directory moves to ticket-archive/, no longer in-flight.

Branch IS the selection

Convention

Every ticket branch contains its ticket ID. Standard prefixes:

Prefix	Origin	Example
feat/	:start (standard work)	feat/MAZ-43
fix/	:start (bugs)	fix/MAZ-43-followup
exp/	:exp (experimental)	exp/MAZ-44

The prefix is informational. The selection lookup parses the ticket ID anywhere in the branch name.

Selection lookup

Every ticket-* skill that needs to know the active ticket runs the same lookup:

1. Read .project-conf.toml. $PREFIX = `prefix` if set, else `key`. (Linear/JIRA use `key` because it is already a short identifier like MAZ/LOU/PLTF; GitHub-backed projects set `prefix` explicitly because `key` is `owner/repo` and unsafe for branch names / filesystem paths.)
2. $BRANCH = git branch --show-current
3. Extract $PREFIX-\d+ from $BRANCH.
   - No match → stop with error:
       "Branch '$BRANCH' does not encode a $PREFIX ticket ID.
        Check out a ticket branch first, or run :start / :exp to create one."
   - Match → $TICKET
4. Verify ~/.claude/ticket-active/$TICKET/ exists.
   - Missing → stop with error:
       "$TICKET is not in-flight. Run :start $TICKET first."
5. Use $TICKET as the active ticket.

This replaces the old CURRENT-$PREFIX read entirely. There is no per-session state file. There is no :select skill.

Switching tickets = git checkout <other-branch>. The next ticket-skill invocation naturally picks up the new selection.

Consequences

• Selection-vs-branch mismatch is impossible by construction. The branch is the selection.
• Detached HEAD and main/master produce the no-match error and stop the skill. You cannot do ticket work without a ticket branch — this is intentional, given that the cost of lost work is too high (per design discussion).
• Multiple in-flight tickets require multiple branches, which require multiple worktrees (or sequential checkouts in the same cwd). Worktrees are the natural answer for true parallelism.
• Selection state is zero-cost. It's recovered from git branch --show-current on every skill entry — no file to keep in sync.

state.toml

Each in-flight ticket may carry a state.toml inside its directory. Absence of the file = active, no parent.

# Sub-state of the ticket. Defaults: 'active', no blocker.
state         = "active"                          # 'active' | 'blocked'
blocked_on    = "waiting on Bob's fix in mazzy#42" # required if state = 'blocked'
blocked_since = "2026-05-24T15:00:00Z"             # required if state = 'blocked'

# Optional linkage to a parent ticket in the same project.
parent        = "MAZ-3"                            # ticket ID

When state.toml is written

• :start — if a parent is detected (Linear/JIRA) or specified (--parent, all backends): write parent. Otherwise leave the file absent.
• :pause — auto-prompt for blocker reason. If user gives a non-empty / non-none reason: write state = "blocked", blocked_on, blocked_since. Otherwise leave state.toml absent (or only the parent field if set previously).
• :start of an already-existing in-flight ticket (resume): no change — preserve existing state.toml.
• :archive — file is removed along with the rest of the ticket dir on archival.

What's not in state.toml

• subtasks — children are queried live from upstream when needed. Storing them locally would create a stale-cache problem.
• selected / current — selection lives in the git branch, not the file.
• Any field that can be derived from elsewhere (git status, ticket-system API).

Parent / subtask linkage

Capture (at :start)

:start MAZ-43             # auto-detect parent for Linear/JIRA, none for GH
:start MAZ-43 --parent MAZ-3   # explicit

All three backends expose a native parent / sub-issue relationship:

• Linear: parentId on Issue (queryable via mcp__linear-server__get_issue and writable via save_issue).
• JIRA: parent / sub-task hierarchy (issue links + parent field).
• GitHub: native sub-issues, GA in 2024. REST /repos/{owner}/{repo}/issues/{N}/sub_issues; GraphQL subIssues on Issue; gh sub-issue CLI extension. No label hacks, no task-list body editing — the relationship is a first-class field.

Pre-validation (when --parent $P is given). Before any of the linkage cases below:

• Verify $P exists upstream. If not, stop with "--parent $P not found in <system>.". Cheap (one API call); prevents typos that would create dead links.

• If $P's upstream state is the terminal done state, print a one-line warning:

  "Note: parent ticket $P is already in 'Done' state. Subtasks are typically completed before the parent is closed."

  Do not block — the user already typed the flag and is the authority. The warning is the call-out, not a gate.

Logic (uniform across backends):

1. :start queries upstream for $TICKET's parent.

2. No --parent given: if upstream returns a parent, use it. If not, no parent is recorded.

3. --parent $P given, matches upstream: no-op upstream; proceed.

4. --parent $P given, no upstream parent yet: prompt for explicit confirmation:

   "Establish $TICKET as a sub-issue of $P? This will modify $P in the ticket system. [y/N]"

   On y: call the upstream linkage API (Linear save_issue with parentId; JIRA equivalent; GH POST /sub_issues). On n: skip the upstream write but still record parent = "$P" in local state.toml (so the merge-time note still surfaces it).

5. --parent $P given, conflicts with upstream: stop with an error showing both values.

Design rule: writes to a ticket other than the one the skill was invoked on require explicit user confirmation. Direct writes to the invoked ticket (state transitions, comments, description edits performed by :start / :document / :archive / :merge) are not gated — the skill name is the consent. Side-effect writes to other tickets, like creating a parent linkage on $P, are gated.

When a parent is captured (locally or upstream):

• parent = "$PARENT" is written to state.toml.
• A one-line note is prepended to task_plan.md:

  > **Parent:** $PARENT — *<parent title at time of :start>*

• The note is human-readable context; the structured field in state.toml is authoritative.

Surface at merge (and archive)

:merge and :archive query upstream and emit informational notes before performing their primary action. Notes are advisory — they never block.

Note 1: Parent linkage.

1. Read state.toml → parent.
2. If parent is set:
   a. Query upstream for parent's current state.
   b. Emit:
        "Note: parent ticket $PARENT is in state '$PARENT_STATE'."
   c. If $PARENT_STATE != done:
      - Query upstream for parent's children (excluding $TICKET).
      - Filter to those not in done state.
      - Emit:
        "  Sibling subtasks not yet done: $LIST_WITH_STATES"

Note 2: This ticket's subtasks.

1. Query upstream for $TICKET's children.
2. If any exist:
   a. Emit:
        "Note: this ticket has subtasks: $LIST_WITH_STATES"

Example output for a :merge:

Note: parent ticket MAZ-3 is in state 'In Progress'.
  Sibling subtasks not yet done: MAZ-5 (In Progress), MAZ-7 (Backlog)

Note: this ticket has subtasks: MAZ-44 (In Review), MAZ-45 (Done)

Proceeding with merge transition…

Why notes, not blocks

Strict enforcement ("can't merge if parent isn't done") would push the user into the wrong corner often — partial work on a subtask is routinely shipped before the parent is fully done, by design. The note exists to make sure the user notices the parent's state, not to gate on it.

Skill behavior

:start [--parent <ID>] $TICKET

1. Read .project-conf.toml → $PREFIX.
2. Verify $TICKET is a valid $PREFIX-\d+ form.
3. Check current branch:
   • If on a branch encoding a different ticket: stop with "currently on '$BRANCH'; run :pause first, then :start $TICKET."
   • If on a branch encoding $TICKET: resume mode — skip branch creation.
   • Otherwise: create branch feat/$TICKET from current HEAD and check out.
4. Create ticket-active/$TICKET/ if absent, with template task_plan.md, findings.md, progress.md.
5. Parent capture. (See Parent / subtask linkage → Capture for the full rules.)
   • Query upstream for $TICKET's parent (sub-issue relationship — all three backends support this natively).
   • If --parent $P is given and no upstream parent exists: prompt for confirmation before writing the linkage upstream. On decline, record parent in local state.toml only.
   • On conflict between --parent and the existing upstream parent: stop with an error.
   • If a parent is established (locally or upstream): write state.toml with parent = "$PARENT", and prepend > **Parent:** $PARENT — *<title>* to task_plan.md.
6. Transition $TICKET to In Progress upstream.
7. Run the standard :plan flow.
8. Confirm.

Argument-less form (:start with no $TICKET) is removed — the new model requires explicit ticket identification at start time.

:exp "<description>"

(Detailed in design/ticket-rag.md and earlier discussion.) Creates a ticket in the configured system, branches exp/$TICKET, skips :plan. Accepts an optional --parent $P flag; when given, follows the same pre-validation + confirmation flow as :start --parent. Auto-detection of a parent does not apply (the experiment ticket is freshly created and has no pre-existing upstream linkage).

:pause

1. Selection lookup → $TICKET.
2. Append operational-only block to progress.md (after the :pause / :update restructure: branch / HEAD / cwd / dirty count / last-completed one-line / next-step one-line).
3. Auto-prompt: "What's blocking you on $TICKET? (Enter 'none' if just stopping.)"
   • Answer none (case-insensitive) or empty: leave state.toml unchanged.
   • Any other text: write/update state.toml with state = "blocked", blocked_on = <text>, blocked_since = $TS.
4. No CURRENT clear. The ticket stays in-flight; selection is naturally lost when the user checks out a different branch.

Note: :pause no longer modifies any selection state because there is none to modify. The branch is the selection.

:update

Selection lookup → $TICKET. Otherwise unchanged from current behavior (after the restructure that separates operational from substantive prose).

:document and :archive

Selection lookup → $TICKET. Push upstream as today.

:archive additionally emits the parent / subtask notes (same logic as :merge) before performing the transition to done.

:merge

1. Selection lookup → $TICKET.
2. Read state.toml → $PARENT.
3. Emit parent / subtask notes (see Parent / subtask linkage section).
4. Perform the merge state transition upstream.
5. The notes are stdout only; never written to ticket-system comments or local files.

:tickets (new, dashboard)

Lists every in-flight ticket for the current project with a row per ticket. Columns:

Column	Source
Ticket ID	dir name in ticket-active/
Selected?	does current branch's parsed ticket match this row?
State	state.toml: active / blocked
Blocker	state.toml blocked_on, if blocked
Parent	state.toml parent, if set
Branch	git branch --list '*$TICKET*' first match
Uncommitted	git status --porcelain against the ticket's branch (if the branch has uncommitted changes in any working tree)
Last touched	max mtime across task_plan.md, findings.md, progress.md
Open PR	gh pr list --head <branch> — number + state + draft?
CodeRabbit run?	count of coderabbitai[bot] reviews on the PR
CodeRabbit responded?	user comment or push timestamp > most recent CodeRabbit review timestamp — one-bit signal, may render as responded / pending

The "responded" check is a proxy (it doesn't verify per-comment engagement). It's a useful binary signal at the dashboard level; deeper inspection requires opening the PR.

Output format: aligned columns, one row per ticket. Optional --json for machine consumption.

Performance. O(N) API calls per invocation (one gh pr list per ticket, plus parent / subtask queries). Latency is accepted in the first cut — no caching, no parallel fan-out. Optimization waits until in-flight ticket counts make it warranted.

:block (new)

:block "<reason>"

Marks the currently selected ticket as blocked with a reason. Equivalent to :pause followed by re-selection, but without the progress.md write and without losing the current selection (you stay on the branch). Writes/updates state.toml.

Removed / not added

• :select — not added. Switching tickets is git checkout <branch>.
• :current — not added. The branch already shows the current ticket.

.project-conf.toml reservations

The new format may carry multi-ticket-related fields. Reserved namespaces:

[branch_prefixes]
feature = "feat"          # default
fix     = "fix"           # default
exp     = "exp"           # default

[exp]
label         = "experiment"   # optional; applied to experiment tickets
branch_prefix = "exp"          # default; mirror of [branch_prefixes].exp

# (Other reserved namespaces — [rag], [status_labels] — covered in adjacent docs.)

First cut may ignore [branch_prefixes] and hardcode the defaults. The namespace is reserved for projects that want different prefixes.

Migration

No auto-migration code in skills (same discipline as .project-conf.toml).

For each existing legacy project (mazzy/MAZ, lyos/PLTF), a one-off manual migration:

1. Confirm .project-conf.toml is in place (separate migration).
2. For each ticket directory currently under ticket-active/:
   • If a feature branch already exists: keep it; just remove CURRENT-$PREFIX.
   • If no branch: create feat/$TICKET from a sensible base.
3. Delete CURRENT-$PREFIX.

For Linear / JIRA projects, parent linkages will be picked up on the next :start or by a one-off "rehydrate state.toml" script that iterates in-flight tickets and queries upstream.

Interaction with RAG

The RAG indexes by ticket_id. Multiple in-flight tickets simply mean more provenance='local' content scattered across nearby IDs. No schema or ingestion changes.

/slopstop:search does not filter by the selected ticket by default — semantic search should find context across nearby tickets, including ones the session isn't actively working. The selected ticket is incidental to search relevance.

Parent / subtask relationships are not indexed by the RAG directly; they're consulted live by :merge / :archive / :tickets. The ticket_refs JSONB column in the RAG schema captures cross-ticket references found in chunk text incidentally, which may include parent / subtask IDs as a by-product.

Prerequisites

• .project-conf.toml format (separate, plugin-wide rename) — required first.
• ticket-gh-init — required for any new GH-backed project (creates state labels).
• :pause / :update restructure — independent but logically grouped; both this and the restructure touch the same skills, so do them in one pass per skill if convenient.

None of these block the design; they block delivery of specific milestones.

Initial milestones

1. Branch-IS-selection lookup helper, used by every ticket-* skill (replaces all CURRENT-$PREFIX reads).
2. state.toml schema + writers in :start and :pause.
3. :start updates — branch creation, parent capture (Linear/JIRA auto-detect), --parent flag (all backends).
4. :merge and :archive parent / subtask notes.
5. :exp (covered in adjacent doc).
6. :tickets dashboard.
7. :block (small; can ship with or after dashboard).

Step 1 is the keystone — once branch-as-selection is wired, the rest is additive.