ERROR Task add_material is not registered to build Kernel derived objects

[j-barton1066]

Hello,
I have been working on learning to use MALAMUTE in the MOOSE system and as I have been expanding my .i file to run a DED simulation I have been running into the error add_material not registered to build Kernel.
Here is my input file it was built out of some of the examples given in the repository it's pretty rough but a part of my learning process.
Thank you for your help

T_room = 300
T_melt = 1500
T_ambient = 300
dt = 200 


[Mesh]
  [mesh]  
    type = GeneratedMeshGenerator
    dim = 3
    xmin = -4.5
    xmax = 4.5
    ymin = -4.5
    ymax = 4.5
    zmin = 0
    zmax = 3.3
    nx = 30
    ny = 30
    nz = 11
  []
  [add_set1]
    type = SubdomainBoundingBoxGenerator
    input = mesh
    block_id = 3
    bottom_left = '-50 -50 0'
    top_right = '50 50 0.9'
  []
  [add_set2]
    type = SubdomainBoundingBoxGenerator
    input = add_set1
    block_id = 1
    bottom_left = '-50 -50 0.9'
    top_right = '50 50 3.3'
  []

  [add_set3]
    type = GeneratedMeshGenerator
    dim = 3
    xmax = 0.001
    ymax = 0.001
    zmin = -0.001
    subdomain_ids = 2
  []
  [moving_boundary]
    type = SideSetsAroundSubdomainGenerator
    input = add_set3
    block = 2
    new_boundary = 'moving_boundary'
  []

  [cmbn]
    type = CombinerGenerator
    inputs = 'add_set2 moving_boundary'
  []

  skip_partitioning = true
[]


[Variables]
  [temp]
    block = '1 2 3'
  []
[]


[AuxVariables]
  #[temp]
    #order = FIRST
    #family = LAGRANGE
  #[]
  [temp_aux]
    order = FIRST
    family = LAGRANGE
    block = '1 2 3'
  []
[]

[Kernels]
    [time]
        type = ADHeatConductionTimeDerivative
        variable = temp
    []
    [heat_conduction]
        type = ADHeatConduction
        variable = temp
        thermal_conductivity = thermal_conductivity
    []
    [heat_source_laser] # Laser heat source
        type = MeltPoolHeatSource
        variable = temp
        laser_power = 100 #Not fixed examples had going up to 250
        effective_beam_radius = 0.2 #Not sure if this is standard
        absorption_coefficient = 0.2 #GPT says could go up to .6 for Si based alloys
        heat_transfer_coefficient = 100 #GPT reccomendation 50-500 W/m^2K
        StefanBoltzmann_constant = 5.67e-8
        material_emissivity = .3 # .3 to .9 for Si depending on oxidation closer to 1= better emmiter
        ambient_temperature = 300
        laser_location_x = ".5 + t"
        laser_location_y = ".5"
        rho_l = 2500 #ranges typically from 2500-2700
        rho_g = 1.184 #
        vaporization_latent_heat = 6.1e6
    []
[]


[Materials]
  [thermal_conductivity]
    type = ADHeatConduction
    value = 148.0 #silicon(W/m*K)
    property = thermal_conductivity
    block = '1 2 3'
  []
  [E]
    type = ADPiecewiseLinearInterpolationMaterial
    x = '0 294.994  1671.48  1721.77 1e7'
    y = '150e3 150e3 100e3 20e3 5e3'  # Si at room temp 130-170 GPa #MPa # 10^9 Pa = 10^9 kg/m/s^2 = kg/mm/ms^2
    property = youngs_modulus
    variable = temp_aux
    extrapolation = false
    block = '1 2 3'
  []
  [nu]
    type = ADPiecewiseLinearInterpolationMaterial
    x = '0 294.994 1669.62 1721.77 1e7'
    y = '0.26 0.26 0.28 0.28 0.28' #Possion's ratio fir Si is around 0.22-0.28
    property = poissons_ratio
    variable = temp_aux
    extrapolation = false
    block = '1 2 3'
  []
  [elasticity_tensor]
    type = ADComputeVariableIsotropicElasticityTensor
    youngs_modulus = youngs_modulus
    poissons_ratio = poissons_ratio
    block = '1 2 3'
  []

  [thermal_expansion_strain_product]
    type = ADComputeThermalExpansionEigenstrain
    stress_free_temperature = ${T_melt}
    thermal_expansion_coeff = 2.6e-6 #for pure silicon adjust based on alloy
    temperature = temp_aux
    eigenstrain_name = thermal_eigenstrain_product
    block = '1 2'
  []
  [thermal_expansion_strain_substrate]
    type = ADComputeThermalExpansionEigenstrain
    stress_free_temperature = ${T_room}
    thermal_expansion_coeff = 2.6e-6 #for pure silicon adjust based on alloy
    temperature = temp_aux
    eigenstrain_name = thermal_eigenstrain_substrate
    block = '1 3'
  []

  [radial_return_stress]
    type = ADComputeMultipleInelasticStress
    inelastic_models = 'power_law_hardening'
    block = '1 2 3'
  []

  [power_law_hardening]
    type = ADIsotropicPowerLawHardeningStressUpdate
    strength_coefficient = 847 #K
    strain_hardening_exponent = 0.01 #n #lower for brittle materials like Si
    relative_tolerance = 1e-6 #need changed?
    absolute_tolerance = 1e-8 #need changed?
    temperature = temp_aux
    block = '1 2 3'
  []
[]

[Executioner]
    type = Transient
    solve_type = 'NEWTON'
  
    petsc_options_iname = '-ksp_type -pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -pc_factor_shift_amount'
    petsc_options_value = 'preonly lu       superlu_dist NONZERO 1e-10'
  
    line_search = 'none'
  
    l_max_its = 100
    nl_max_its = 15
    nl_rel_tol = 1e-8
    nl_abs_tol = 1e-10
  
    start_time = 0.0
    end_time = 2000
    dt = ${dt} # ms
    dtmin = 1e-6
  
    auto_advance = true # cut time-step when subapp fails
  
    error_on_dtmin = false
[]

[Outputs]
    file_base = 'output/laser'
    csv = true
    [exodus]
        type = Exodus
        file_base = 'output/Exodus\laser'
        time_step_interval = 5
    []
[]

[sapitts]

@dewenyushu or @cticenhour, could either of you help to answer this question?