v0.5.3

[ilyakruchinin]

Changes since v0.5.2

Battery Charge Indicator (LCD)

• Added battery percentage reading via ADC1 (GPIO1) with 200k/100k voltage divider compensation
• Added charger status detection via GPIO3 (active-low when charging)
• Battery icon with percentage text and yellow lightning bolt when charging, displayed on the LCD top row alongside Wi-Fi and AS11 indicators
• Calibrated voltage-to-percentage mapping (3.3V–3.93V → 0–100%)
• Periodic updates every 3 seconds in both normal and SoftAP modes

BLE RX Buffer Improvements

• Moved BLE notification RX buffers to PSRAM to free internal RAM
• Increased RX_BUF_MAX from 4KB to 16KB — fixes truncated settings summaries from large AS11 notifications

SD Card Format Support

• Added sd_storage_format() — unmounts, formats (f_mkfs), remounts, and recreates the directory tree
• Exposed via API for in-field card formatting without removing the card

Session Writer Robustness

• Therapy auto-start now handles SD card not ready gracefully — displays "SD Card Error" warning instead of silently failing
• bsp_display_set_therapy_active(true) only called when session actually starts

Web UI (portal.html)

• Dashboard progress bar: Fixed display:none bug preventing the loading progress bar from appearing; bar now stays visible as a green separator after load completes (no layout jump)
• Double-tap reset: Reduced touch double-tap zoom-reset threshold from 300ms to 200ms to prevent accidental triggers on mobile

HTTP Server Tuning

• max_open_sockets: 10 → 24 to handle parallel dashboard fetches
• recv_wait_timeout: 5s → 2s to proactively close idle connections before browser RSTs
• Enabled TCP keepalive (5s idle / 5s interval / 3 retries) to detect dead connections
• Reduces "error in recv : 104" (ECONNRESET) warnings from browser connection pooling

What needs to be tested

• Battery charging indicator and percentage display on LCD
• Boot without SD card — warning displayed
• Therapy start without SD card — "SD Card Error" warning shown
• Dashboard progress bar visibility during and after data load (no layout jump)
• BLE settings summary no longer truncated
• HTTP server stability under parallel dashboard fetches

---

This discussion was created from the release v0.5.3.

[ilyakruchinin]

Closing as v0.5.4 has now been released: #63

[Asad-Foresite]

Battery % readings have been pretty erratic for me. Shows 100% while
plugged in during the day; the moment the USB cable is disconnected it
immediately drops to 92%, then bounces between 92% and 88% every 10-15
seconds. Woke up last night to a very low number (don't remember exact
value), even though based on my earlier battery-life test it should have
had several more hours left.

If tighter calibration turns out to be difficult with the voltage divider
approach, maybe rounding to increments of 5% would help smooth out the
noise/bounce, even if it's less precise?

[ilyakruchinin]

Please use the latest v0.5.6