Added Pegasus Astro Flatmaster Neo Documentation

src/content/docs/lightboxes/pegasus-astro/pegasus-flatmaster-neo/pegasus-flatmaster-neo.md

@@ -0,0 +1,165 @@
+---
+title: Pegasus FlatMaster Neo
+categories: ["lightboxes", "dustcaps"]
+description: Gemini SnapCap
+thumbnail: ./pegasus-flatmaster-neo.webp
+---
+
+# Pegasus FlatMaster Neo — INDI Auxiliary Driver
+
+The Pegasus FlatMaster Neo driver provides INDI support for the Pegasus Astro FlatMaster Neo flat field panel and environmental sensors.
+
+## Overview
+
+This driver implements the following INDI interfaces:
+
+- `AUX_INTERFACE`
+- `LIGHTBOX_INTERFACE`
+- `DUSTCAP_INTERFACE`
+- `WEATHER_INTERFACE`
+
+The driver communicates with the FlatMaster Neo over a USB serial link. It exposes lightbox control, dust cap control, dew heater control, weather sensors, and device status reporting.
+
+## Supported Hardware
+
+- Pegasus Astro FlatMaster Neo
+
+## Driver Metadata
+
+- Driver Name: `Pegasus FlatMaster Neo`
+- Executable: `indi_pegasus_flatmaster_neo`
+- Family: Lightbox, Dustcap
+- Manufacturer: Pegasus Astro
+- Platforms: Linux, BSD, macOS
+- Version: 1.0
+
+## Installing & Running
+
+The driver is built as part of the INDI core package.
+
+To run the driver manually:
+
+```bash
+indiserver -v indi_pegasus_flatmaster_neo
+```
+
+If you build only this driver from the INDI source tree, the build target is also `indi_pegasus_flatmaster_neo`.
+
+## Connectivity
+
+### USB Serial
+
+The FlatMaster Neo uses a USB serial interface. The driver uses the connection plugin to scan serial ports and match devices whose system name contains `FlatMaster`.
+
+- Default baud rate: `9600`
+- Connection type supported: USB serial only
+- Network / Bluetooth: not supported by this driver
+
+### First Time Connection
+
+1. Power on the FlatMaster Neo.
+2. Start the driver in an INDI client or manually with `indiserver -v indi_pegasus_flatmaster_neo`.
+3. In the client connection panel, select the detected serial port or allow automatic scanning.
+4. Click Connect.
+
+On successful connection, the driver performs a handshake using `F#` and expects the response to contain `FMNEO`.
+
+## Features
+
+- Lightbox power on/off
+- Adjustable lightbox brightness (0–100)
+- Dust cap open/close and angle control (0–270°)
+- Dew heater control (0–100%)
+- Auto dew mode on/off
+- Calibration offsets for temperature and humidity
+- Real-time sensor values for temperature, humidity, and dew point
+- Device status overview via FlatMaster Neo status query
+
+## Driver Controls
+
+### Firmware
+
+The driver exposes a `Firmware` text property showing the reported firmware version.
+
+
+![](./images/main.webp)
+
+### Light Box
+
+The `Light Box` tab exposes:
+
+- `On/Off`
+- `Brightness`
+
+The driver sends commands `FE:0` / `FE:1` for enable/disable and `FL:<value>` for brightness.
+
+![](./images/lightbox.webp)
+
+### Dust Cap
+
+The `Dust Cap` tab exposes:
+
+- `Open`
+- `Close`
+- `Angle`
+
+The driver sends `FS:0` to park the cap and `FS:1` to unpark/open it.
+
+![](./images/dust_cap.webp)
+
+### Dew Control
+
+The `Dew Control` tab exposes:
+
+- `Dew Heater` percentage
+- `Auto Dew` enable/disable
+
+The driver sends `DH:<value>` for heater power and `PD:0` / `PD:1` for auto dew.
+
+![](./images/dew_control.webp)
+
+### Environment / Weather
+
+The `Environment` tab exposes:
+
+- `Temperature`
+- `Humidity`
+- `Dew Point`
+- `Calibration Offsets` for temperature and humidity
+
+The driver reads weather data from the device using `ES` and reads/saves offsets with `CR`, `CT:<value>`, and `CH:<value>`.
+
+![](./images/environment.webp)
+
+### Device Status
+
+The driver publishes an overview status property showing:
+
+- Light intensity
+- Light active state
+- Cap target angle
+- Cap actual angle
+- Cap status
+- Auxiliary status values from the FlatMaster Neo response
+
+![](./images/overview.webp)
+
+## Operation
+
+- Connect the device via USB.
+- Use the `Light Box` controls to turn the panel on/off and adjust brightness.
+- Use the `Dust Cap` controls to set the cap angle or park/unpark the cover.
+- Use the `Dew Control` panel to change heater power and toggle automatic dew control.
+- Monitor temperature, humidity, and dew point in the `Environment` tab.
+- Adjust the provided temperature and humidity offsets if the readings differ from a reference sensor.
+
+## Troubleshooting
+
+- If the driver fails to connect, verify the FlatMaster Neo is powered and visible as a serial device.
+- Ensure no other application is using the same serial port.
+- Check that the driver handshake returns `FMNEO`; if not, the device may not be a supported FlatMaster Neo.
+- If properties do not update, reconnect and verify the device responds to `FA`, `ES`, and `CR` queries.
+
+## Notes
+
+- The driver is intended for use with INDI clients such as INDI Control Panel, KStars/Ekos, and other INDI-compatible tools.

src/content/docs/lightboxes/pegasus-astro/pegasus-flatmaster-neo/pegasus-flatmaster-neo.yaml

@@ -0,0 +1,15 @@
+# Display Names (Human-Friendly - Required)
+driver_name: Pegasus FlatMaster Neo
+manufacturer_name: Pegasus Astro
+
+# Categories (Required - can be multiple)
+categories:
+  - lightboxes
+  - dustcaps
+
+# Additional Metadata (Optional)
+website: www.indlib.org
+executable: indi_pegasus_flatmaster_neo
+platforms: Linux, BSD, OSX
+author: Dominik Merkel
+version: 1.0