Document 1.5.0: FT8 decoder, Audio Waterfall, phone menu, arm64 support - Controls: FT8 Decoder section; phone hamburger menu / Full Screen - Audio-and-Video: Audio Waterfall panel (Live vs WSJT-X style) - Headless-Deployment: arm64 (Raspberry Pi) tarball now supported - WSJTX-Integration: bridge v0.2.4 output; Origin-check troubleshooting - Diagnostic-Logging: --debug-ft8 / DEBUG_FT8, Diagnostics tab flags - Authentication: audit log shows full date - Home: mention FT8/CW decoders, waterfall, phone menu, arm64 Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Document the prebuilt headless x86-64 bare-metal tarball (closes #57)
Document new serial port autocomplete field; fix macOS example to use /dev/cu.* not /dev/tty.* Setting-Up-rigctld and CW-Keying-Setup both described the Serial Port / Keyer Serial Port fields as plain manual-entry text fields. Both now auto-populate with serial devices detected on the server machine while staying freely typable. Also corrects the CW Keying Setup macOS example, which listed /dev/tty.* (blocks on DCD) instead of the correct /dev/cu.* dial-out device — the new autocomplete only ever lists cu.* paths.
Add DX Cluster Spotting page and cross-links Documents the new telnet DX Cluster feature: how it differs from the POTA/SOTA/WWFF poll-based spots, settings (host/port/login callsign, callsign-prefix and keyword filters), the table/click-to-tune behavior, and the connection rate-limit/troubleshooting details. Cross-linked from Home, POTA-and-SOTA-Spots, and the --debug-dxcluster flag added to Diagnostic-Logging.
Fix CW keying Windows splitter guidance, name concrete tools com0com alone (a bare virtual port pair) doesn't bridge to the real physical port both rigctld and the CW keyer need — it needs its bundled hub4com utility, or a purpose-built splitter, to actually relay real-port traffic to multiple virtual endpoints. Replaces the vague "use a virtual COM port pair" guidance with concrete options (com0com+hub4com, VSPE, FabulaTech Serial Port Splitter).
Link Linux Packages page instead of docs/ blob URL
Add Linux DEB & RPM Packages page; sync Headless Deployment updates New Linux-Packages page (mirrors docs/linux-packages.md in the main repo) so codebase references have a live wiki target instead of a repo-relative docs/ path. Also pushes the pending Headless Deployment updates from the main repo's wiki/ mirror that hadn't made it to the live wiki yet: the issue #55 /proc/asound fix write-up and the "Image runtime dependencies" section. Home.md indexes the new page. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01YNVpNraajtXbTwaRwHCavx
Add Headless Deployment page; sync Home and Diagnostic Logging for Docker/systemd Mirrors main-repo wiki/ folder as of commit 9cf7b54 — the live wiki had fallen behind and was missing the Headless Deployment guide entirely.
docs: rename spectrum scope pages to sort together in the wiki sidebar GitHub's wiki has no custom sidebar, so it falls back to an alphabetical list of all pages — the three spectrum scope guides (Audio-IQ..., FT-710..., Hamlib-UDP...) were scattered across it instead of grouped. Renamed all three to a shared Spectrum-Scope- prefix (Spectrum-Scope-Hamlib-UDP, Spectrum-Scope-FT-710, Spectrum-Scope-Audio-IQ) so they sort adjacently. Updates all internal cross-links accordingly. Old page URLs are not preserved — GitHub wikis don't support redirects.
docs: add Audio I/Q spectrum scope page, split RF Power/RF Level, note Xiegu G90 support
docs: document in-app Diagnostics tab, Audio Enhancements toggle, sync MME/WDM-KS fix - Diagnostic-Logging: add In-App Diagnostics Tab section (Settings > DIAGNOSTICS), add missing --debug-wsjtx flag, fix stale flag count in intro text - Audio-and-Video: document the Audio Enhancements (AGC/Noise Suppression/Echo Cancellation) toggle under Local Client Audio; re-sync MME/WDM-KS host API wording that had drifted out of date from the repo's wiki/ mirror
docs: document N6ARA TinyMIDI keyboard-mode support alongside vBand
fix: use correct DLL path %APPDATA%\RigControl Web on Windows Wiki page never received the path fix applied to docs/ft4222-spectrum-setup.md in 14fb9c1 (2026-06-18). Electron's userData directory is %APPDATA%\RigControl Web (Roaming, not Local; different casing), not %LOCALAPPDATA%\RIGCONTROL WEB.
Correct rate-fix requirement: global override alone is sufficient Isolated the two rate mechanisms by disabling the per-device WirePlumber rule and testing the permanent global clock-rate override on its own: 20+ seconds of stable operation, correct rate negotiated on the hardware node, and a working audio link, with no per-device rule present. The earlier draft overstated that both were required — only the global override is; the per-device rule is now documented as an optional way to scope the rate change to just the radio's device instead of the whole system.
Remove unrelated USB Audio troubleshooting note from spectrum scope setup The PipeWire/audio power-cycle fix belongs solely on the Audio and Video page; this page is about the spectrum scope's USB-SPI data stream, a different device entirely.
Document permanent PipeWire device-pinning fix for radio power-cycle audio Adds a recommended permanent method (WirePlumber rate pinning + ALSA asoundrc node pinning via playback_node/capture_node) that survives PipeWire's default-device drift after a radio power cycle, validated end-to-end against a real FT-710 power-off/power-on cycle. Written against the FT-710 but generalized: applies to any radio or USB audio device needing sample-rate correction and/or reconnect-proof routing. Keeps the existing pipewire [ALSA, 44.1k] + default-device method as a quicker, config-file-free fallback.
Add CW Keying Setup to the Guide Sections index
Document radio power on/off and Linux PipeWire audio power-cycle caveat Adds a Radio Power On/Off section to Controls, a Linux PipeWire default-device + FT-710 44.1kHz setup section to Audio-and-Video, a cross-link from FT-710 Spectrum Scope Setup, and updates the Home guide index. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Add tested platforms and PipeWire requirements Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add wsjtx-bridge download links Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add WSJTX Integration page with complete cross-platform instructions Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add WSJTX Integration wiki page Complete setup guide for WSJTX bridge including platform-specific virtual audio cable setup (Linux PipeWire, Windows VB-Audio, macOS BlackHole), auto-detection details, WSJTX configuration tables, and troubleshooting for Windows cable detection warnings. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
docs: add CW Keying Setup wiki page Step-by-step guide for configuring single-port USB CW keying, covering radio menu settings (IC-7300 detailed), app keyer settings, the Windows single-port limitation, and troubleshooting. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Update Windows DLL location to %LOCALAPPDATA%\RIGCONTROL WEB DLLs placed in the install directory are wiped on upgrade. Direct users to %LOCALAPPDATA%\RIGCONTROL WEB instead, which survives app updates. Add upgrade migration note and update troubleshooting. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
docs: add spots troubleshooting section and --debug-spots flag Add troubleshooting section to POTA-and-SOTA-Spots page covering the system clock pitfall (the root cause of a Windows-only spots display failure), missing spot types, and cross-machine debugging tips. Add --debug-spots to the Diagnostic Logging flag table. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Fix Windows setup: remove incorrect Zadig instructions, document D2XX driver requirement Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Revert multicast port doc change: default is 4531 (multicast port, not the rigctld control port)
Fix multicast port default in docs: 4531 was a typo, should be 4532
Document resetting accounts on reinstall and the Windows uninstall data-removal option
docs: sync wiki with 06.15.2026-BetaFinal changes - Add Linux audio/video group permission notes - Add Linux dialout group permission note for rigctld/CW keyer - Clarify FT-710-only FT4222H support vs FTDX101/FTDX10 SCU-LAN10 - Update Hamlib UDP spectrum scope radio compatibility list - Update Controls screenshot reference