I have to reload all my thermostats after home assistant restart. Is it normal?

[Apkaloo]

This integration is great and works very nicely. Thanks.

After each restart of home assistant, all my 11 vtherms are disabled.
I need to go into the Vtherm integration and reload them one by one manually. Thereafter, I have to turn on the heating of each of them and finally reload the scheduler integration because they start in manual mode.

1- Is it normal?
2- If not, where should I look to investigate the problem? Something I did wrong?
3- If this is normal, is there a way to automate reloading and restarting of the vtherms?

Thank you for your assistance.

[jmcollin78]

Hello @Apkaloo

No it is not normal. You have to look in the logs. I thingk something is wrong in your environment. See here to activate logs: https://github.com/jmcollin78/versatile_thermostat/blob/main/documentation/en/troubleshooting.md#enable-logs-for-the-versatile-thermostat

[Apkaloo]

OK, si ce n'est pas normal alors je vais chercher. Je regarde ce soir , mais je crains de ne pas comprendre les logs... 😐 Merci pour votre aide et pour ce magnifique programme.

…

______ Denis Jeanteur 89, route des vallées 37510 Ballan-Miré 06 63 95 40 07 Le 12 déc. 2024, 21:31 +0100, Jean-Marc Collin ***@***.***>, a écrit :

Hello @Apkaloo No it is not normal. You have to look in the logs. I thingk something is wrong in your environment. See here to activate logs: https://github.com/jmcollin78/versatile_thermostat/blob/main/documentation/en/troubleshooting.md#enable-logs-for-the-versatile-thermostat — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: ***@***.***>

[jmcollin78]

Just activate the VTherm logs and send it to me around the time you have the issue.

[pqhf5kd]

I'm also noticing that my climate entities are set to (I think) Heat and Manual, but not heating if under but close to the target, after a restart. But I have only been using VTherm for less than a day, I will follow this discussion :)

[Apkaloo]

I have tried to analyse the logs. In fact, I have several errors but not affecting directly Versatile thermostat. Maybe this impact the overall starting of my home assistant.
As I don't understand well the different issues, I'm trying to solve them by removing some integrations... So far with no effect. I'm not used to debugging, I'm just a user, not a programmer (and that's perhaps why I'm in trouble).
I did a little patch in Node Red to detect the HA restart and then reload the different Vtherm and then reload the schedulers... It works!
But it's only a patch. But this is not a solution. Sorry about that.
I'll further investigate after the holidays :)
Happy Christmas