PCduino3 nano not booting up - PROBLEM SOLVED

[Solarbytes]

I have tried the Trixie versions for PCduino 3 and PcDuino3 Nano, did all on a Linux laptop after failing on a Windows laptop using Rasperry imager, but when I power up the board with the SD card in it, the screen remains black. When I power it on without an sd card, the original OS does boot up. I tried the bookworm version that used to work for the past 5 years but the result is the same. Any idea on how to troubleshoot this would be much appreciated.

Thanks,
Gaetano.

[johang]

Connect to the UART console and show the complete log output during boot.

[Solarbytes]

I cannot find my serial to USB converter so I ordered a new one, coming tomorrow.

One more detail: I managed to get bookworm to load after formatting the SD card before copying the image. I used Disks under Linux Mint to do this, it is 10 times faster than DD. Is formatting recommended/needed when using DD?

I then tried to upgrade Bookworm in-place to Trixie, the upgrade appeared to be successful, but the screen remained black after a reboot.

[Solarbytes]

Here is output to PuTTy through UART up to where it stalls:

U-Boot SPL 2025.10johang-dirty (Jan 01 2026 - 02:34:30 +0000)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1

U-Boot 2025.10johang-dirty (Jan 01 2026 - 02:34:30 +0000) Allwinner Technology

CPU: Allwinner A20 (SUN7I)
Model: LinkSprite pcDuino3 Nano
DRAM: 1 GiB
Core: 58 devices, 24 uclasses, devicetree: separate
WDT: Not starting watchdog@1c20c90
MMC: mmc@1c0f000: 0
Loading Environment from FAT... Unable to use mmc 0:2...
HDMI connected: EDID: invalid EDID data
Unknown monitor
HDMI connected: EDID: invalid EDID data
Unknown monitor
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Net: eth0: ethernet@1c50000

starting USB...
USB EHCI 1.00
USB OHCI 1.0
USB EHCI 1.00
USB OHCI 1.0
Bus usb@1c14000: 1 USB Device(s) found
Bus usb@1c14400: 2 USB Device(s) found
Bus usb@1c1c000: 1 USB Device(s) found
Bus usb@1c1c400: 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found U-Boot script /boot/boot.scr
992 bytes read in 2 ms (484.4 KiB/s)

Executing script at 43100000

6025728 bytes read in 251 ms (22.9 MiB/s)
16055584 bytes read in 666 ms (23 MiB/s)
25761 bytes read in 11 ms (2.2 MiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x5bf200 ]

Flattened Device Tree blob at 43000000

Booting using the fdt blob at 0x43000000
Working FDT set to 43000000
Loading Ramdisk to 490b0000, end 49fffd20 ... OK
Loading Device Tree to 490a6000, end 490af4a0 ... OK
Working FDT set to 490a6000
DE is present but not probed

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.12.63+deb13-armmp (debian-kernel@lists.debian.org ) (arm-linux-gnueabihf-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils fo r Debian) 2.44) #1 SMP Debian 6.12.63-1 (2025-12-30)
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
[ 0.000000] OF: fdt: Machine model: LinkSprite pcDuino3 Nano
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 M iB
[ 0.000000] OF: reserved mem: initialized node default-pool, compatible id sh ared-dma-pool
[ 0.000000] OF: reserved mem: 0x4a000000..0x4fffffff (98304 KiB) map reusable default-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] percpu: Embedded 20 pages/cpu s50508 r8192 d23220 u81920
[ 0.000000] Kernel command line: root=PARTUUID=8b73d711-02 rw rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, li near)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144
[ 0.000000] allocated 1048576 bytes of page_ext
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 44024 entries in 130 pages
[ 0.000000] ftrace: allocated 129 pages with 2 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jif fies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjus t=1 rcu_task_cpu_ids=2.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adju st=1 rcu_task_cpu_ids=2.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980 46511097ns
[ 0.000019] Switching to timer-based delay loop, resolution 41ns
[ 0.001488] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_ idle_ns: 79635851949 ns
[ 0.003523] Console: colour dummy device 80x25
[ 0.003559] printk: legacy console [tty0] enabled
[ 0.004401] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=96000)
[ 0.004452] CPU: Testing write buffer coherency: ok
[ 0.004555] pid_max: default: 32768 minimum: 301
[ 0.013572] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor, tomoyo,bpf,ipe,ima,evm
[ 0.016892] landlock: Up and running.
[ 0.016923] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.017309] AppArmor: AppArmor initialized
[ 0.017429] TOMOYO Linux initialized
[ 0.018041] LSM support for eBPF active
[ 0.020563] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linea r)
[ 0.020643] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.027571] /cpus/cpu@0 missing clock-frequency property
[ 0.027690] /cpus/cpu@1 missing clock-frequency property
[ 0.027726] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.030971] Setting up static identity map for 0x40300000 - 0x403000ac
[ 0.032463] rcu: Hierarchical SRCU implementation.
[ 0.032528] rcu: Max phase no-delay instances is 1000.
[ 0.033259] Timer migration: 1 hierarchy levels; 8 children per group; 1 cros snode level
[ 0.035618] EFI services will not be available.
[ 0.036572] smp: Bringing up secondary CPUs ...
[ 0.048443] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.048793] smp: Brought up 1 node, 2 CPUs
[ 0.048874] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.048901] CPU: All CPU(s) started in HYP mode.
[ 0.048920] CPU: Virtualization extensions available.
[ 0.049972] Memory: 898532K/1048576K available (12288K kernel code, 1802K rwd ata, 4188K rodata, 2048K init, 427K bss, 48884K reserved, 98304K cma-reserved, 2 62144K highmem)
[ 0.052149] devtmpfs: initialized
[ 0.062193] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.062741] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns
[ 0.062836] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.073986] pinctrl core: initialized pinctrl subsystem
[ 0.075526] DMI not present or invalid.
[ 0.077766] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.085362] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.087000] audit: initializing netlink subsys (disabled)
[ 0.087800] audit: type=2000 audit(0.076:1): state=initialized audit_enabled= 0 res=1
[ 0.090433] thermal_sys: Registered thermal governor 'fair_share'
[ 0.090468] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.090514] thermal_sys: Registered thermal governor 'step_wise'
[ 0.090539] thermal_sys: Registered thermal governor 'user_space'
[ 0.090562] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.090882] No ATAGs?
[ 0.091157] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.091212] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.094151] Serial: AMBA PL011 UART driver
[ 0.101614] /soc/lcd-controller@1c0c000: Fixed dependency cycle(s) with /soc/ hdmi@1c16000
[ 0.101790] /soc/lcd-controller@1c0c000: Fixed dependency cycle(s) with /soc/ display-backend@1e40000
[ 0.101915] /soc/lcd-controller@1c0c000: Fixed dependency cycle(s) with /soc/ display-backend@1e60000
[ 0.102051] /soc/lcd-controller@1c0d000: Fixed dependency cycle(s) with /soc/ hdmi@1c16000
[ 0.102173] /soc/lcd-controller@1c0d000: Fixed dependency cycle(s) with /soc/ display-backend@1e40000
[ 0.102294] /soc/lcd-controller@1c0d000: Fixed dependency cycle(s) with /soc/ display-backend@1e60000
[ 0.102597] /soc/hdmi@1c16000: Fixed dependency cycle(s) with /soc/lcd-contro ller@1c0d000
[ 0.102772] /soc/hdmi@1c16000: Fixed dependency cycle(s) with /soc/lcd-contro ller@1c0c000
[ 0.103016] /soc/interrupt-controller@1c81000: Fixed dependency cycle(s) with /soc/interrupt-controller@1c81000
[ 0.103199] /soc/display-frontend@1e00000: Fixed dependency cycle(s) with /so c/display-backend@1e40000
[ 0.103376] /soc/display-frontend@1e00000: Fixed dependency cycle(s) with /so c/display-backend@1e60000
[ 0.103563] /soc/display-frontend@1e20000: Fixed dependency cycle(s) with /so c/display-backend@1e40000
[ 0.103740] /soc/display-frontend@1e20000: Fixed dependency cycle(s) with /so c/display-backend@1e60000
[ 0.103848] /soc/display-backend@1e40000: Fixed dependency cycle(s) with /soc /lcd-controller@1c0d000
[ 0.103945] /soc/display-backend@1e40000: Fixed dependency cycle(s) with /soc /lcd-controller@1c0c000
[ 0.104033] /soc/display-backend@1e40000: Fixed dependency cycle(s) with /soc /display-frontend@1e20000
[ 0.104120] /soc/display-backend@1e40000: Fixed dependency cycle(s) with /soc /display-frontend@1e00000
[ 0.104231] /soc/display-backend@1e60000: Fixed dependency cycle(s) with /soc /lcd-controller@1c0d000
[ 0.104328] /soc/display-backend@1e60000: Fixed dependency cycle(s) with /soc /lcd-controller@1c0c000
[ 0.104415] /soc/display-backend@1e60000: Fixed dependency cycle(s) with /soc /display-frontend@1e20000
[ 0.104503] /soc/display-backend@1e60000: Fixed dependency cycle(s) with /soc /display-frontend@1e00000
[ 0.105920] /soc/lcd-controller@1c0c000: Fixed dependency cycle(s) with /soc/ hdmi@1c16000
[ 0.106087] /soc/lcd-controller@1c0c000: Fixed dependency cycle(s) with /soc/ display-backend@1e40000
[ 0.106224] /soc/lcd-controller@1c0c000: Fixed dependency cycle(s) with /soc/ display-backend@1e60000
[ 0.106738] /soc/lcd-controller@1c0d000: Fixed dependency cycle(s) with /soc/ hdmi@1c16000
[ 0.106879] /soc/lcd-controller@1c0d000: Fixed dependency cycle(s) with /soc/ display-backend@1e40000
[ 0.107012] /soc/lcd-controller@1c0d000: Fixed dependency cycle(s) with /soc/ display-backend@1e60000
[ 0.110045] /soc/lcd-controller@1c0d000: Fixed dependency cycle(s) with /soc/ hdmi@1c16000
[ 0.110301] /soc/lcd-controller@1c0c000: Fixed dependency cycle(s) with /soc/ hdmi@1c16000
[ 0.110570] /soc/hdmi@1c16000: Fixed dependency cycle(s) with /soc/lcd-contro ller@1c0d000
[ 0.110867] /soc/hdmi@1c16000: Fixed dependency cycle(s) with /soc/lcd-contro ller@1c0c000
[ 0.119231] /soc/display-frontend@1e00000: Fixed dependency cycle(s) with /so c/display-backend@1e40000
[ 0.119391] /soc/display-frontend@1e00000: Fixed dependency cycle(s) with /so c/display-backend@1e60000
[ 0.119898] /soc/display-frontend@1e20000: Fixed dependency cycle(s) with /so c/display-backend@1e40000
[ 0.120016] /soc/display-frontend@1e20000: Fixed dependency cycle(s) with /so c/display-backend@1e60000
[ 0.120544] /soc/display-frontend@1e20000: Fixed dependency cycle(s) with /so c/display-backend@1e40000
[ 0.120788] /soc/display-frontend@1e00000: Fixed dependency cycle(s) with /so c/display-backend@1e40000
[ 0.120962] /soc/lcd-controller@1c0d000: Fixed dependency cycle(s) with /soc/ display-backend@1e40000
[ 0.121168] /soc/lcd-controller@1c0c000: Fixed dependency cycle(s) with /soc/ display-backend@1e40000
[ 0.121329] /soc/display-backend@1e40000: Fixed dependency cycle(s) with /soc /lcd-controller@1c0d000
[ 0.121540] /soc/display-backend@1e40000: Fixed dependency cycle(s) with /soc /lcd-controller@1c0c000
[ 0.121736] /soc/display-backend@1e40000: Fixed dependency cycle(s) with /soc /display-frontend@1e20000
[ 0.121890] /soc/display-backend@1e40000: Fixed dependency cycle(s) with /soc /display-frontend@1e00000
[ 0.122580] /soc/display-frontend@1e20000: Fixed dependency cycle(s) with /so c/display-backend@1e60000
[ 0.122782] /soc/display-frontend@1e00000: Fixed dependency cycle(s) with /so c/display-backend@1e60000
[ 0.123002] /soc/lcd-controller@1c0d000: Fixed dependency cycle(s) with /soc/ display-backend@1e60000
[ 0.123173] /soc/lcd-controller@1c0c000: Fixed dependency cycle(s) with /soc/ display-backend@1e60000
[ 0.123355] /soc/display-backend@1e60000: Fixed dependency cycle(s) with /soc /lcd-controller@1c0d000
[ 0.123508] /soc/display-backend@1e60000: Fixed dependency cycle(s) with /soc /lcd-controller@1c0c000
[ 0.123652] /soc/display-backend@1e60000: Fixed dependency cycle(s) with /soc /display-frontend@1e20000
[ 0.123828] /soc/display-backend@1e60000: Fixed dependency cycle(s) with /soc /display-frontend@1e00000
[ 0.126572] /soc/hdmi@1c16000: Fixed dependency cycle(s) with /hdmi-connector
[ 0.126853] /hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi@1c16000
[ 0.129128] kprobes: kprobe jump-optimization is enabled. All kprobes are opt imized if possible.
[ 0.148045] iommu: Default domain type: Translated
[ 0.148125] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.154769] pps_core: LinuxPPS API ver. 1 registered
[ 0.154839] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti giometti@linux.it
[ 0.154906] PTP clock support registered
[ 0.157933] NetLabel: Initializing
[ 0.158092] NetLabel: domain hash size = 128
[ 0.158116] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.158276] NetLabel: unlabeled traffic allowed by default
[ 0.159046] vgaarb: loaded
[ 0.163346] clocksource: Switched to clocksource arch_sys_counter
[ 0.176519] VFS: Disk quotas dquot_6.6.0
[ 0.176966] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.178798] AppArmor: AppArmor Filesystem Enabled
[ 0.198418] NET: Registered PF_INET protocol family
[ 0.198895] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line ar)
[ 0.202633] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.202873] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.202949] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.203138] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear )
[ 0.203645] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.204740] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, line ar)
[ 0.205244] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.205356] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.206229] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.206338] NET: Registered PF_XDP protocol family
[ 0.206385] PCI: CLS 0 bytes, default 64
[ 0.209922] Trying to unpack rootfs image as initramfs...
[ 0.252590] Initialise system trusted keyrings
[ 0.252913] Key type blacklist registered
[ 0.253916] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.254149] zbud: loaded
[ 0.258055] fuse: init (API version 7.41)
[ 0.260486] integrity: Platform Keyring initialized
[ 0.260642] integrity: Machine keyring initialized
[ 0.617962] Key type asymmetric registered
[ 0.618078] Asymmetric key parser 'x509' registered
[ 1.022087] Freeing initrd memory: 15680K
[ 1.070837] bounce: pool size: 64 pages
[ 1.071650] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 48)
[ 1.072220] io scheduler mq-deadline registered
[ 1.092073] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.117746] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 1.123948] Serial: AMBA driver
[ 1.124979] STM32 USART driver initialized
[ 1.130666] mousedev: PS/2 mouse device common for all mice
[ 1.134559] sunxi-rtc 1c20d00.rtc: registered as rtc0
[ 1.134680] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01T00:00:1 0 UTC (10)
[ 1.139154] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 6370868154 ns
[ 1.141415] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, gue ssing.
[ 1.142180] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 (800000 0f) counters available
[ 1.144979] NET: Registered PF_INET6 protocol family
[ 1.193296] Segment Routing with IPv6
[ 1.193521] In-situ OAM (IOAM) with IPv6
[ 1.193730] mip6: Mobile IPv6
[ 1.193794] NET: Registered PF_PACKET protocol family
[ 1.194350] mpls_gso: MPLS GSO support
[ 1.194680] ThumbEE CPU extension supported.
[ 1.194733] Registering SWP/SWPB emulation handler
[ 1.209834] registered taskstats version 1
[ 1.210166] Loading compiled-in X.509 certificates
[ 1.526526] Loaded X.509 cert 'Build time autogenerated kernel key: ab9fda786 6b809d03002a36c175543e7f12f95de'
[ 1.542892] Key type .fscrypt registered
[ 1.542971] Key type fscrypt-provisioning registered
[ 1.750663] Key type encrypted registered
[ 1.750760] AppArmor: AppArmor sha256 policy hashing enabled
[ 1.750868] ima: No TPM chip found, activating TPM-bypass!
[ 1.750903] ima: Allocated hash algorithm: sha256
[ 1.751002] ima: No architecture policies found
[ 1.751201] evm: Initialising EVM extended attributes:
[ 1.751236] evm: security.selinux
[ 1.751257] evm: security.SMACK64 (disabled)
[ 1.751276] evm: security.SMACK64EXEC (disabled)
[ 1.751405] evm: security.SMACK64TRANSMUTE (disabled)
[ 1.751430] evm: security.SMACK64MMAP (disabled)
[ 1.751450] evm: security.apparmor
[ 1.751470] evm: security.ima
[ 1.751488] evm: security.capability
[ 1.751507] evm: HMAC attrs: 0x1
[ 2.064898] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 2.122075] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 2.125234] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dum my regulator
[ 2.151309] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 69, base_baud = 15 00000) is a U6_16550A
[ 2.151599] printk: legacy console [ttyS0] enabled
[ 3.671544] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dum my regulator
[ 3.680981] clk: Disabling unused clocks
[ 3.681966] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dum my regulator
[ 3.685251] PM: genpd: Disabling unused power domains
[ 3.716710] Freeing unused kernel image (initmem) memory: 2048K
[ 3.723251] Run /init as init process
Loading, please wait...
Starting systemd-udevd version 257.9-1deb13u1
[ 5.582154] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dum my regulator
[ 5.682675] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, now ayout=0)
[ 5.721265] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 5.735942] usbcore: registered new interface driver usbfs
[ 5.741780] usbcore: registered new interface driver hub
[ 5.747402] usbcore: registered new device driver usb
[ 5.753246] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[ 5.887259] mmc0: host does not support reading read-only switch, assuming wr ite-enable
[ 5.925439] mmc0: new high speed SDXC card at address aaaa
[ 5.940338] mmcblk0: mmc0:aaaa SN256 238 GiB
[ 5.951958] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 5.958756] ohci-platform 1c14400.usb: new USB bus registered, assigned bus n umber 1
[ 5.967877] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[ 5.975257] ohci-platform 1c14400.usb: irq 71, io mem 0x01c14400
[ 5.981521] mmcblk0: p1 p2
[ 5.985891] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus n umber 2
[ 6.003122] ohci-platform 1c1c400.usb: irq 72, io mem 0x01c1c400
[ 6.044992] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bc dDevice= 6.12
[ 6.053516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 6.060865] usb usb1: Product: Generic Platform OHCI controller
[ 6.066999] usb usb1: Manufacturer: Linux 6.12.63+deb13-armmp ohci_hcd
[ 6.073637] usb usb1: SerialNumber: 1c14400.usb
[ 6.084011] hub 1-0:1.0: USB hub found
[ 6.087999] hub 1-0:1.0: 1 port detected
[ 6.093411] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bc dDevice= 6.12
[ 6.101908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 6.109332] usb usb2: Product: Generic Platform OHCI controller
[ 6.115395] usb usb2: Manufacturer: Linux 6.12.63+deb13-armmp ohci_hcd
[ 6.122047] usb usb2: SerialNumber: 1c1c400.usb
[ 6.129059] Warning! ehci_hcd should always be loaded before uhci_hcd and ohc i_hcd, not after
[ 6.129403] hub 2-0:1.0: USB hub found
[ 6.142092] hub 2-0:1.0: 1 port detected
[ 6.201382] axp20x-i2c 0-0034: AXP20x variant AXP209 found
[ 6.225332] axp20x-i2c 0-0034: AXP20X driver loaded
[ 6.353802] ehci-platform 1c14000.usb: EHCI Host Controller
[ 6.359547] ehci-platform 1c14000.usb: new USB bus registered, assigned bus n umber 3
[ 6.374918] ehci-platform 1c14000.usb: irq 114, io mem 0x01c14000
[ 6.379510] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 6.411488] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus n umber 4
[ 6.448498] usb 1-1: new low-speed USB device number 2 using ohci-platform
[ 6.456692] ehci-platform 1c1c000.usb: irq 115, io mem 0x01c1c000
[ 6.463423] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 6.474108] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 6.12
[ 6.482582] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 6.483467] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 6.489875] usb usb3: Product: EHCI Host Controller
[ 6.500916] usb usb3: Manufacturer: Linux 6.12.63+deb13-armmp ehci_hcd
[ 6.507480] usb usb3: SerialNumber: 1c14000.usb
[ 6.524076] hub 3-0:1.0: USB hub found
[ 6.531191] hub 3-0:1.0: 1 port detected
[ 6.540816] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 6.12
[ 6.549339] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 6.556763] usb usb4: Product: EHCI Host Controller
[ 6.561848] usb usb4: Manufacturer: Linux 6.12.63+deb13-armmp ehci_hcd
[ 6.568569] usb usb4: SerialNumber: 1c1c000.usb
[ 6.580982] hub 4-0:1.0: USB hub found
[ 6.586837] hub 4-0:1.0: 1 port detected
[ 6.760493] usb_phy_generic usb_phy_generic.0.auto: dummy supplies not allowe d for exclusive requests (id=vbus)
[ 6.772716] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 6.827478] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
[ 6.849633] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 6.12
[ 6.858213] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 6.865712] usb usb5: Product: MUSB HDRC host driver
[ 6.870872] usb usb5: Manufacturer: Linux 6.12.63+deb13-armmp musb-hcd
[ 6.877572] usb usb5: SerialNumber: musb-hdrc.1.auto
[ 6.884962] hub 5-0:1.0: USB hub found
[ 6.889085] hub 5-0:1.0: 1 port detected
[ 7.169741] usb 1-1: device descriptor read/64, error -62
[ 7.216725] axp20x-gpio axp20x-gpio: DMA mask not set
[ 7.227845] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
[ 7.501448] usb 1-1: New USB device found, idVendor=03f0, idProduct=4041, bcd Device= 1.01
[ 7.509765] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.516974] usb 1-1: Product: HP Wired Keyboard
[ 7.521553] usb 1-1: Manufacturer: LIZHI Flash IC
[ 7.722440] hid: raw HID events driver (C) Jiri Kosina
[ 7.814786] usbcore: registered new interface driver usbhid
[ 7.820562] usbhid: USB HID core driver
[ 7.907750] input: LIZHI Flash IC HP Wired Keyboard as /devices/platform/soc/ 1c14400.usb/usb1/1-1/1-1:1.0/0003:03F0:4041.0001/input/input0
[ 8.048176] hid-generic 0003:03F0:4041.0001: input,hidraw0: USB HID v1.11 Key board [LIZHI Flash IC HP Wired Keyboard] on usb-1c14400.usb-1/input0
[ 8.064103] input: LIZHI Flash IC HP Wired Keyboard Consumer Control as /devi ces/platform/soc/1c14400.usb/usb1/1-1/1-1:1.1/0003:03F0:4041.0002/input/input1
[ 8.131690] input: LIZHI Flash IC HP Wired Keyboard System Control as /device s/platform/soc/1c14400.usb/usb1/1-1/1-1:1.1/0003:03F0:4041.0002/input/input2
[ 8.146377] hid-generic 0003:03F0:4041.0002: input,hidraw1: USB HID v1.11 Dev ice [LIZHI Flash IC HP Wired Keyboard] on usb-1c14400.usb-1/input1
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
[ 9.400940] EXT4-fs (mmcblk0p2): recovery complete
[ 9.407774] EXT4-fs (mmcblk0p2): mounted filesystem 56f6207b-a899-4b2a-857f-7 4947a2183a2 r/w with ordered data mode. Quota mode: none.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 9.726682] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 10.307263] systemd[1]: System time advanced to timestamp on /var/lib/systemd /timesync/clock: Mon 2026-01-12 00:33:43 UTC
[ 10.470837] systemd[1]: Inserted module 'autofs4'
[ 10.723674] systemd[1]: systemd 257.9-1deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +AC L +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTS ETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 10.758170] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 13 (trixie)!

[ 10.803464] systemd[1]: Hostname set to .
[ 12.479849] systemd[1]: Queued start job for default target graphical.target.
[ 12.619786] systemd[1]: Created slice system-getty.slice - Slice /system/gett y.
[ OK ] Created slice system-getty.slice - Slice /system/getty.
[ 12.645291] systemd[1]: Created slice system-modprobe.slice - Slice /system/m odprobe.
[ OK ] Created slice system-modprobe.slice - Slice /system/modprobe.
[ 12.669212] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /s ystem/serial-getty.
[ OK ] Created slice system-serial\x2dget…slice - Slice /system/serial-getty.
[ 12.695438] systemd[1]: Created slice user.slice - User and Session Slice.
[ OK ] Created slice user.slice - User and Session Slice.
[ 12.716577] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ OK ] Started systemd-ask-password-conso…equests to Console Directory Watch.
[ 12.740442] systemd[1]: Started systemd-ask-password-wall.path - Forward Pass word Requests to Wall Directory Watch.
[ OK ] Started systemd-ask-password-wall.…d Requests to Wall Directory Watch.
[ 12.765624] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount proc-sys-fs-binfm…ormats File System Automount Point.
[ 12.792001] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0...
Expecting device dev-ttyS0.device - /dev/ttyS0...
[ 12.811822] systemd[1]: Reached target cryptsetup.target - Local Encrypted Vo lumes.
[ OK ] Reached target cryptsetup.target - Local Encrypted Volumes.
[ 12.832022] systemd[1]: Reached target integritysetup.target - Local Integrit y Protected Volumes.
[ OK ] Reached target integritysetup.targ… Local Integrity Protected Volumes.
[ 12.852098] systemd[1]: Reached target paths.target - Path Units.
[ OK ] Reached target paths.target - Path Units.
[ 12.872020] systemd[1]: Reached target remote-cryptsetup.target - Remote Encr ypted Volumes.
[ OK ] Reached target remote-cryptsetup.target - Remote Encrypted Volumes.
[ 12.891855] systemd[1]: Reached target remote-fs.target - Remote File Systems .
[ OK ] Reached target remote-fs.target - Remote File Systems.
[ 12.911896] systemd[1]: Reached target remote-veritysetup.target - Remote Ver ity Protected Volumes.
[ OK ] Reached target remote-veritysetup.… - Remote Verity Protected Volumes.
[ 12.931881] systemd[1]: Reached target slices.target - Slice Units.
[ OK ] Reached target slices.target - Slice Units.
[ 12.952041] systemd[1]: Reached target swap.target - Swaps.
[ OK ] Reached target swap.target - Swaps.
[ 12.972037] systemd[1]: Reached target veritysetup.target - Local Verity Prot ected Volumes.
[ OK ] Reached target veritysetup.target - Local Verity Protected Volumes.
[ 13.005106] systemd[1]: Listening on systemd-creds.socket - Credential Encryp tion/Decryption.
[ OK ] Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 13.029069] systemd[1]: Listening on systemd-initctl.socket - initctl Compati bility Named Pipe.
[ OK ] Listening on systemd-initctl.socke…- initctl Compatibility Named Pipe.
[ 13.053225] systemd[1]: Listening on systemd-journald-dev-log.socket - Journa l Socket (/dev/log).
[ OK ] Listening on systemd-journald-dev-…socket - Journal Socket (/dev/log).
[ 13.077238] systemd[1]: Listening on systemd-journald.socket - Journal Socket s.
[ OK ] Listening on systemd-journald.socket - Journal Sockets.
[ 13.097526] systemd[1]: Listening on systemd-networkd.socket - Network Servic e Netlink Socket.
[ OK ] Listening on systemd-networkd.socket - Network Service Netlink Socket.
[ 13.120048] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was s kipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 13.134280] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skip ped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 13.149351] systemd[1]: Listening on systemd-udevd-control.socket - udev Cont rol Socket.
[ OK ] Listening on systemd-udevd-control.socket - udev Control Socket.
[ 13.172810] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kerne l Socket.
[ OK ] Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 13.193078] systemd[1]: dev-hugepages.mount - Huge Pages File System was skip ped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/huge pages).
[ 13.219996] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 13.252529] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run /lock...
Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[ 13.323542] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File S ystem...
Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 13.381640] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 13.449321] systemd[1]: Starting kmod-static-nodes.service - Create List of S tatic Device Nodes...
Starting kmod-static-nodes.service…eate List of Static Device Nodes...
[ 13.509047] systemd[1]: Starting modprobe@configfs.service - Load Kernel Modu le configfs...
Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 13.577342] systemd[1]: Starting modprobe@drm.service - Load Kernel Module dr m...
Starting modprobe@drm.service - Load Kernel Module drm...
[ 13.633937] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Mo dule efi_pstore...
Starting modprobe@efi_pstore.servi… - Load Kernel Module efi_pstore...
[ 13.697126] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module f use...
Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 13.740732] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hiberna te Storage Info was skipped because of an unmet condition check (ConditionPathEx ists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d87605 0dc67).
[ 13.845432] systemd[1]: Starting systemd-journald.service - Journal Service.. .
Starting systemd-journald.service - Journal Service...
[ 13.913095] systemd[1]: Starting systemd-modules-load.service - Load Kernel M odules...
Starting systemd-modules-load.service - Load Kernel Modules...
[ 13.958350] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line...
Starting systemd-network-generator…k units from Kernel command line...
[ 13.996286] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measu rement was skipped because of an unmet condition check (ConditionSecurity=measur ed-uki).
[ 14.077245] systemd[1]: Starting systemd-remount-fs.service - Remount Root an d Kernel File Systems...
Starting systemd-remount-fs.servic…unt Root and Kernel File Systems...
[ 14.120155] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setu p was skipped because of an unmet condition check (ConditionSecurity=measured-uk i).
[ 14.209614] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
Starting systemd-udev-load-credent…Load udev Rules from Credentials...
[ 14.271184] systemd-journald[250]: Collecting audit messages is disabled.
[ 14.305399] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 14.483117] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File S ystem.
[ OK ] Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 14.517592] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/ lock.
[ OK ] Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[ 14.551027] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File Sy stem.
[ OK ] Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 14.585454] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ OK ] Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 14.624126] systemd[1]: Finished kmod-static-nodes.service - Create List of S tatic Device Nodes.
[ OK ] Finished kmod-static-nodes.service…Create List of Static Device Nodes.
[ 14.664505] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 14.686549] systemd[1]: Finished modprobe@configfs.service - Load Kernel Modu le configfs.
[ OK ] Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 14.728298] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 14.746650] systemd[1]: Finished modprobe@drm.service - Load Kernel Module dr m.
[ OK ] Finished modprobe@drm.service - Load Kernel Module drm.
[ 14.784226] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully .
[ 14.808049] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Mo dule efi_pstore.
[ OK ] Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 14.844284] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 14.864026] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module f use.
[ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 14.894353] systemd[1]: Started systemd-journald.service - Journal Service.
[ OK ] Started systemd-journald.service - Journal Service.
[ OK ] Finished systemd-modules-load.service - Load Kernel Modules.
[ OK ] Finished systemd-network-generator…ork units from Kernel command line.
[ OK ] Finished systemd-remount-fs.servic…mount Root and Kernel File Systems.
[ OK ] Finished systemd-udev-load-credent…- Load udev Rules from Credentials.
[ OK ] Reached target network-pre.target - Preparation for Network.
Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
Mounting sys-kernel-config.mount - Kernel Configuration File System...
Starting systemd-journal-flush.ser…sh Journal to Persistent Storage...
Starting systemd-random-seed.service - Load/Save OS Random Seed...
Starting systemd-sysctl.service - Apply Kernel Variables...
Starting systemd-tmpfiles-setup-de… Device Nodes in /dev gracefully...
[ OK ] Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ OK ] Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 15.768694] systemd-journald[250]: Received client request to flush runtime j ournal.
[ 15.785112] systemd-journald[250]: File /var/log/journal/c27c69d7574a428e8a7e eb15fa7b6dec/system.journal corrupted or uncleanly shut down, renaming and repla cing.
[ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
[ OK ] Finished systemd-tmpfiles-setup-de…ic Device Nodes in /dev gracefully.
[ OK ] Finished systemd-journal-flush.ser…lush Journal to Persistent Storage.
[ OK ] Finished systemd-udev-trigger.service - Coldplug All udev Devices.
Starting systemd-resolved.service - Network Name Resolution...
Starting systemd-timesyncd.service - Network Time Synchronization...
Starting systemd-tmpfiles-setup-de…eate Static Device Nodes in /dev...
[ OK ] Finished systemd-tmpfiles-setup-de…Create Static Device Nodes in /dev.
[ 16.907496] random: crng init done
[ OK ] Reached target local-fs-pre.target…Preparation for Local File Systems.
Mounting tmp.mount - /tmp...
Starting systemd-udevd.service - R…ager for Device Events and Files...
[ OK ] Finished systemd-random-seed.service - Load/Save OS Random Seed.
[ OK ] Mounted tmp.mount - /tmp.
[ OK ] Reached target local-fs.target - Local File Systems.
[ OK ] Listening on systemd-sysext.socket… System Extension Image Management.
Starting apparmor.service - Load AppArmor profiles...
Starting systemd-tmpfiles-setup.se…ate System Files and Directories...
[ OK ] Started systemd-timesyncd.service - Network Time Synchronization.
[ OK ] Started systemd-resolved.service - Network Name Resolution.
[ OK ] Reached target nss-lookup.target - Host and Network Name Lookups.
[ OK ] Reached target time-set.target - System Time Set.
[ OK ] Started systemd-udevd.service - Ru…anager for Device Events and Files.
Starting systemd-networkd.service - Network Configuration...
[ OK ] Finished systemd-tmpfiles-setup.se…reate System Files and Directories.
[ 18.395478] audit: type=1400 audit(1768178031.924:2): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="1password" pid=325 comm="apparmor _parser"
[ 18.410543] audit: type=1400 audit(1768178031.924:3): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="Discord" pid=326 comm="apparmor_p arser"
[ 18.491040] audit: type=1400 audit(1768178032.024:4): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=329 comm= "apparmor_parser"
[ 18.527629] audit: type=1400 audit(1768178032.032:5): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid =328 comm="apparmor_parser"
[ 18.574152] audit: type=1400 audit(1768178032.108:6): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="balena-etcher" pid=331 comm="appa rmor_parser"
[ 18.629345] audit: type=1400 audit(1768178032.164:7): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="brave" pid=332 comm="apparmor_par ser"
[ 18.683508] audit: type=1400 audit(1768178032.212:8): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="buildah" pid=334 comm="apparmor_p arser"
[ 18.734069] audit: type=1400 audit(1768178032.268:9): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="busybox" pid=335 comm="apparmor_p arser"
[ 18.787220] audit: type=1400 audit(1768178032.320:10): apparmor="STATUS" oper ation="profile_load" profile="unconfined" name="Xorg" pid=330 comm="apparmor_par ser"
[ 18.839628] audit: type=1400 audit(1768178032.372:11): apparmor="STATUS" oper ation="profile_load" profile="unconfined" name="cam" pid=336 comm="apparmor_pars er"
[ 19.131518] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase
[ 19.319589] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4 961b8b4fadf'
[ 19.334172] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016 ab9d6cf71dd233f0328'
[ 19.350167] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 19.358696] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600 '
[ 19.378722] platform regulatory.0: firmware: failed to load regulatory.db (-2 )
[ 19.397143] platform regulatory.0: firmware: failed to load regulatory.db (-2 )
[ 19.410683] platform regulatory.0: firmware: failed to load regulatory.db (-2 )
[ 19.418297] platform regulatory.0: Direct firmware load for regulatory.db fai led with error -2
[ 19.434794] cfg80211: failed to load regulatory.db
[ OK ] Started systemd-networkd.service - Network Configuration.
[ OK ] Reached target network.target - Network.
Starting systemd-networkd-persiste…tent Storage in systemd-networkd...
[ OK ] Found device dev-ttyS0.device - /dev/ttyS0.
[ OK ] Finished systemd-networkd-persiste…istent Storage in systemd-networkd.
[ OK ] Finished apparmor.service - Load AppArmor profiles.
[ OK ] Reached target sysinit.target - System Initialization.
[ OK ] Started apt-daily.timer - Daily apt download activities.
[ OK ] Started apt-daily-upgrade.timer - …y apt upgrade and clean activities.
[ OK ] Started dpkg-db-backup.timer - Daily dpkg database backup timer.
[ OK ] Started e2scrub_all.timer - Period…Metadata Check for All Filesystems.
[ OK ] Started fstrim.timer - Discard unused filesystem blocks once a week.
[ OK ] Started systemd-tmpfiles-clean.tim…y Cleanup of Temporary Directories.
[ OK ] Reached target timers.target - Timer Units.
[ OK ] Listening on dbus.socket - D-Bus System Message Bus Socket.
[ OK ] Listening on ssh.socket - OpenBSD Secure Shell server socket.
[ OK ] Listening on sshd-unix-local.socke…temd-ssh-generator, AF_UNIX Local).
[ OK ] Listening on systemd-hostnamed.socket - Hostname Service Socket.
[ OK ] Reached target sockets.target - Socket Units.
[ OK ] Reached target basic.target - Basic System.
Starting dbus.service - D-Bus System Message Bus...
Starting e2scrub_reap.service - Re…ne ext4 Metadata Check Snapshots...
Starting ssh.service - OpenBSD Secure Shell server...
Starting systemd-logind.service - User Login Management...
Starting systemd-user-sessions.service - Permit User Sessions...
[ OK ] Started dbus.service - D-Bus System Message Bus.
[ 22.703921] mc: Linux media interface: v0.10
[ OK ] Finished systemd-user-sessions.service - Permit User Sessions.
[ OK ] Finished e2scrub_reap.service - Re…line ext4 Metadata Check Snapshots.
[ OK ] Started getty@tty1.service - Getty on tty1.
[ OK ] Started serial-getty@ttyS0.service - Serial Getty on ttyS0.
[ OK ] Reached target getty.target - Login Prompts.
[ OK ] Started ssh.service - OpenBSD Secure Shell server.
[ OK ] Reached target usb-gadget.target - Hardware activated USB gadget.
[ OK ] Started systemd-logind.service - User Login Management.
[ OK ] Reached target multi-user.target - Multi-User System.
[ OK ] Reached target graphical.target - Graphical Interface.
[ 23.691834] videodev: Linux video capture interface: v2.00
[ 24.073319] Registered IR keymap rc-empty
[ 24.116172] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0
[ 24.138106] sun4i-ss 1c15000.crypto-engine: no reset control found
[ 24.172134] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
[ 24.259413] sun4i-ss 1c15000.crypto-engine: Die ID 0
[ 24.284743] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input3
[ 24.411928] sunxi-ir 1c21800.ir: initialized sunXi IR driver

Debian GNU/Linux 13 debian ttyS0

debian login: [ 24.862006] SCSI subsystem initialized
[ 24.972483] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[ 25.016239] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[ 25.096121] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[ 25.102753] axp20x-adc axp20x-adc: DMA mask not set
[ 25.141569] lima 1c40000.gpu: l2_cache0 64K, 4-way, 64byte cache line, 64bit external bus
[ 25.216029] lima 1c40000.gpu: bus rate = 300000000
[ 25.221090] lima 1c40000.gpu: mod rate = 384000000
[ 25.386036] [drm] Initialized lima 1.1.0 for 1c40000.gpu on minor 0
[ 25.698044] sun4i-drm display-engine: bound 1e00000.display-frontend (ops sun 4i_frontend_driver_exit [sun4i_frontend])
[ 25.747018] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-00 34/axp20x-pek/input/input4
[ 25.838009] sun4i-drm display-engine: bound 1e20000.display-frontend (ops sun 4i_frontend_driver_exit [sun4i_frontend])
[ 25.892925] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4 i_backend_ops [sun4i_backend])
[ 25.920552] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dum my regulator
[ 25.929665] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found
[ 25.936248] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found
[ 25.942498] sun7i-dwmac 1c50000.ethernet: IRQ sfty not found
[ 25.948486] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
[ 25.954563] sun7i-dwmac 1c50000.ethernet: no regulator found
[ 25.961242] sun7i-dwmac 1c50000.ethernet: Version ID not available
[ 25.967715] sun7i-dwmac 1c50000.ethernet: DWMAC1000
[ 25.972865] sun7i-dwmac 1c50000.ethernet: No HW DMA feature register supporte d
[ 25.980279] sun7i-dwmac 1c50000.ethernet: TX Checksum insertion supported
[ 25.987228] sun7i-dwmac 1c50000.ethernet: Normal descriptors
[ 25.993050] sun7i-dwmac 1c50000.ethernet: Ring mode enabled
[ 26.023200] sun4i-drm display-engine: bound 1e40000.display-backend (ops sun4 i_backend_ops [sun4i_backend])
[ 26.114305] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[ 26.122455] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i _tcon_platform_driver_exit [sun4i_tcon])
[ 26.163169] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[ 26.171250] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i _tcon_platform_driver_exit [sun4i_tcon])
[ 26.233213] Registered IR keymap rc-cec
[ 26.262076] rc rc1: sun4i as /devices/platform/soc/1c16000.hdmi/rc/rc1
[ 26.330995] sunxi_cedrus: module is from the staging directory, the quality i s unknown, you have been warned.
[ 26.351102] input: sun4i as /devices/platform/soc/1c16000.hdmi/rc/rc1/input5
[ 26.396408] sun4i-drm display-engine: bound 1c16000.hdmi (ops sun4i_hdmi_driv er_exit [sun4i_drm_hdmi])
[ 26.453902] cedrus 1c0e000.video-codec: Device registered as /dev/video0
[ 26.512343] [drm] Initialized sun4i-drm 1.0.0 for display-engine on minor 1
[ 26.592281] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[ 26.654415] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
[ 26.659149] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regul ator
[ 26.670113] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regula tor
[ 26.724452] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP _PMP
[ 26.732198] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 26.763570] ahci-sunxi 1c18000.sata: AHCI vers 0001.0100, 32 command slots, 3 Gbps, platform mode
[ 26.772718] ahci-sunxi 1c18000.sata: 1/1 ports implemented (port mask 0x1)
[ 26.779854] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 26.836983] scsi host0: ahci-sunxi
[ 26.851661] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x1 00 irq 130 lpm-pol 0
[ 27.172136] ata1: SATA link down (SStatus 0 SControl 300)
[ 27.238920] sun7i-dwmac 1c50000.ethernet end0: renamed from eth0
[ 27.516301] sun7i-dwmac 1c50000.ethernet end0: Register MEM_TYPE_PAGE_POOL Rx Q-0
[ 27.532047] sun7i-dwmac 1c50000.ethernet end0: PHY [stmmac-0:01] driver [RTL8 211E Gigabit Ethernet] (irq=POLL)
[ 27.552398] sun7i-dwmac 1c50000.ethernet end0: No Safety Features support fou nd
[ 27.559894] sun7i-dwmac 1c50000.ethernet end0: RX IPC Checksum Offload disabl ed
[ 27.567346] sun7i-dwmac 1c50000.ethernet end0: No MAC Management Counters ava ilable
[ 27.575155] sun7i-dwmac 1c50000.ethernet end0: PTP not supported by HW
[ 27.585882] sun7i-dwmac 1c50000.ethernet end0: configuring for phy/rgmii-id l ink mode

[Solarbytes]

watch for some unwanted spaces at the end of line, they were line feeds, e.g. the last line should end in "link mode" instead of "l ink mode"

[Solarbytes]

At that stage, the system hasn't actually halted: if I plug the ethernet cable in, it will say the link is up, same when I switch the monitor input away and back. I just don't get the login prompt it seems. ( I did make one change to eth.network: I removed the ClientIdentifier line, it may have nothing to do with this new observation, but before I did that, the ethernet LED's would remain off, and now theyflash, but the board isn't getting an IP address from the router)

[ 143.372792] sun7i-dwmac 1c50000.ethernet end0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 241.199940] Console: switching to colour frame buffer device 240x67
[ 241.229950] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
[ 325.600811] sun7i-dwmac 1c50000.ethernet end0: Link is Down
[ 336.866093] sun7i-dwmac 1c50000.ethernet end0: Link is Up - 1Gbps/Full - flow control rx/tx

[Solarbytes]

By comparison, this is what I get with the bookworm version, it is really just that last step that triggers the login prompt that is not executing in the Trixie image:

[ 22.199318] sun7i-dwmac 1c50000.ethernet end0: configuring for phy/rgmii-id link mode
[ OK ] Started systemd-logind.service - User Login Management.
[ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots.
[ 26.285225] sun7i-dwmac 1c50000.ethernet end0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 26.294577] IPv6: ADDRCONF(NETDEV_CHANGE): end0: link becomes ready

Debian GNU/Linux 12 debian ttyS0

debian login:

[Solarbytes]

UPDATE FOR THE Jan 12 IMAGE - only including the last bit of the output, let me know if you need the entire log. The ethernet now comes up but still doesn't get an IP address from the router, and I still don't get the login prompt;

[ 32.092467] sun7i-dwmac 1c50000.ethernet end0: No Safety Features support found
[ 32.099916] sun7i-dwmac 1c50000.ethernet end0: RX IPC Checksum Offload disabled
[ 32.107330] sun7i-dwmac 1c50000.ethernet end0: No MAC Management Counters available
[ 32.115058] sun7i-dwmac 1c50000.ethernet end0: PTP not supported by HW
[ 32.133352] sun7i-dwmac 1c50000.ethernet end0: configuring for phy/rgmii-id link mode
[ 33.268346] kauditd_printk_skb: 4 callbacks suppressed
[ 33.268408] audit: type=1130 audit(1756924723.164:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj= unconfined msg='unit=sshd-keygen comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal= ? res=success'
[ 33.763832] audit: type=1130 audit(1756924723.660:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj= unconfined msg='unit=ssh comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=su ccess'
[ 36.237046] sun7i-dwmac 1c50000.ethernet end0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 36.360281] audit: type=1334 audit(1756924726.256:51): prog-id=14 op=LOAD
[ 36.367581] audit: type=1334 audit(1756924726.260:52): prog-id=15 op=LOAD
[ 36.374618] audit: type=1334 audit(1756924726.260:53): prog-id=16 op=LOAD
[ 36.944249] audit: type=1130 audit(1756924726.840:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj= unconfined msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? ter minal=? res=success'
[ 38.666048] audit: type=1130 audit(1768353187.285:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj= unconfined msg='unit=dpkg-db-backup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? termin al=? res=success'
[ 38.687177] audit: type=1131 audit(1768353187.285:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj= unconfined msg='unit=dpkg-db-backup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? termin al=? res=success'
[ 67.029705] audit: type=1131 audit(1768353215.649:57): pid=1 uid=0 auid=4294967295 ses=4294967295 subj= unconfined msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? ter minal=? res=success'
[ 67.100869] audit: type=1334 audit(1768353215.721:58): prog-id=14 op=UNLOAD
[ 67.230135] audit: type=1130 audit(1768353215.849:59): pid=1 uid=0 auid=4294967295 ses=4294967295 subj= unconfined msg='unit=e2scrub_all comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal= ? res=success'
[ 67.251003] audit: type=1131 audit(1768353215.849:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj= unconfined msg='unit=e2scrub_all comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal= ? res=success'

[johang]

Looks like it works. Just press enter in the console.

[Solarbytes]

I am confused: my monitor is still not getting any output through HDMI, and the board is not getting an IP address from the router. You are right that on the console through UART, after hitting enter, I get the login promt and I can login. So why is there no output to the monitor through HDMI and why is the network interface not getting an IP address through DHCP? This works automatically in the Bookworm image.

[Solarbytes]

let me play with it. although my router doesn't show the board as connected, I do have an internet connection. I'll post another update if I get stuck.

[Solarbytes]

I have made some progress but I am hitting a wall with rsync, there are dependencies missing that are not installable:

root@teslausb:~# rsync --version
rsync: error while loading shared libraries: libcrypto.so.1.1: cannot open shared object file: No such file or directory

This module is supposed to be part of libssl1.1_1.1.1w-0+deb11u2 or libssl-dev, but when I attempt to install the latter package, it says it is already installed but has missing dependencies. When I try --fix-broken, this is what I get:

libssl-dev is already the newest version (3.5.4-1~deb13u1).
You might want to run 'apt --fix-broken install' to correct these.
Unsatisfied dependencies:
libssl1.1-udeb : Depends: libc6-udeb (>= 2.31) but it is not installable
Depends: libcrypto1.1-udeb (>= 1.1.1w) but it is not installable

Can you think of a way to solve this?

Thank you for all your work to keep those beautiful boards alive :)

[Solarbytes]

something is broken in the Trixie image: rsync is installed, but when I enter rsync --version, it tells me that libcrypto.so.1.1 is missing. This library is obsolete and should not be associated with the version of rsync that comes with Trixie. What could explain that rsync is looking for this obsolete module instead of using libcrypto.so.3 that is actually present in the required folder? I tried reinstalling rsync, but no luck,

[Solarbytes]

PROBLEM SOLVED: I compiled the source of rsync and it works fine now