HomeSlice

A Raspberry Pi Zero home server application built using Python, Django, HTMX and SQLite.

Project Setup

1. Install Python 3.9 with your system package manager, or by visiting python.org.
2. Run the setup.sh script to create the virtual environment and install packages.
3. Fill your desired configuration into the .env file.

Run (development)

1. Activate the Python virtual environment: source .venv/bin/activate
2. Change into the src directory: cd src
3. If needed, migrate the database: python manage.py migrate
4. Run the Django application in development mode: python manage.py runserver

Raspberry Pi Setup

1. Use the Raspberry Pi Imager to install Raspbian onto a device. Set up the device to connect to your network and create SSH keys to securely connect.
2. Connect to the Raspberry Pi using ssh.
3. Install the required packages:

sudo apt-get install nginx python3-venv libopenblas-dev

5. Return to the project on your development machine.
6. Create a file named .pienv and copy the keys from .pienv.default into it. Then fill in your desired configuration.
7. Run the deploy/update.sh script to sync project files to the Raspberry Pi.
8. SSH back into the Raspberry Pi, then follow the Project Setup steps using the prod.txt requirements.
9. Copy the configuration files into the system directory:

sudo cp config/app.socket /etc/systemd/system/
sudo cp config/app.service /etc/systemd/system/

10. Run the following code to enable the application:

sudo systemctl start app.socket
sudo systemctl enable app.socket
sudo systemctl daemon-reload
sudo systemctl restart app

11. Copy the NGINX config into the NGINX available sites directory and enable it:

sudo cp config/app.nginx /etc/nginx/sites-available/
ln -s /etc/nginx/sites-available/app.nginx /etc/nginx/sites-enabled/

12. Verify the NGINX config is valid and then restart NGINX:

nginx -t
sudo systemctl restart nginx