21 terminal support

Terminal Support and Troubleshooting

Bucket Agent runs as a full-screen TUI. To draw the interface, it relies on terminal escape sequences for color, clipboard, mouse, and full-screen control. Some terminals, multiplexers, and SSH sessions handle these sequences differently.

Quick Fixes

Truecolor / Washed-out or wrong colors

# Add to ~/.zshrc or ~/.bashrc
export COLORTERM=truecolor

Inside tmux or over SSH, also add to your tmux config:

# ~/.tmux.conf or ~/.byobu/.tmux.conf
set -g default-terminal "tmux-256color"
set -as terminal-features ",*:RGB"

Recommended tmux settings (clipboard + passthrough)

set -g set-clipboard on
set -g allow-passthrough on

After editing, run:

tmux source-file ~/.tmux.conf
# or detach and reattach

Live diagnostics inside Bucket

Run this slash command:

/terminal-setup

The command reports the terminal, multiplexer, color level, available themes, and clipboard routes Bucket detected, then lists any issues and how to fix them. When color is below truecolor, it explains how to unlock the truecolor-only themes (TokyoNight, RosePineMoon, OscuraMidnight) — or notes that Terminal.app is inherently 256-color. The aliases /terminal-check and /terminal-info run the same command.

---

Detected Terminals

Bucket detects these terminal emulators from environment variables:

• Apple Terminal (Terminal.app)
• Ghostty
• iTerm2
• Warp
• WezTerm
• Kitty
• Alacritty
• Rio
• foot (Wayland-native, Linux)
• VS Code, Cursor, Windsurf, and Zed integrated terminals
• JetBrains IDE terminals (IntelliJ, PhpStorm, and others)
• Bucket Desktop
• VTE-based terminals (GNOME Terminal, GNOME Console, Tilix)
• Windows Terminal

Detection has these limitations:

• Inside tmux, the variables Bucket needs to identify the terminal don't reach the pager.
• Over SSH, many terminal variables aren't forwarded.
• tmux's global environment (tmux -g) reflects the first client that attached to the server, not your current session.

---

Common Problems and Fixes

Problem: Colors look wrong or lack truecolor

Cause: COLORTERM not set or tmux not configured for 24-bit RGB.

Fix: Apply the two settings above, then restart Bucket.

Verify: Run /terminal-setup. Expect color truecolor and themes all. If color is 256 or basic, the issues section has the unlock fix.

Problem: Clipboard problems

Bucket writes to the clipboard through up to three routes, which match the Clipboard routes section of /terminal-setup:

• native — Bucket always writes to the native OS clipboard first.
• tmux buffer — inside tmux, Bucket also writes to the tmux paste buffer (tmux load-buffer).
• OSC 52 — Bucket emits the OSC 52 escape sequence so the outer terminal updates its clipboard. Bucket always emits OSC 52 inside tmux. Outside tmux, it emits OSC 52 on Linux, over SSH, or in a container without a display.

Linux Wayland: on compositors that support the data-control protocol (GNOME 48+, KDE, Sway, Hyprland — the data-control line in /terminal-setup shows yes) copies work even if the terminal loses focus mid-copy. On older compositors (GNOME 46/47), keep the terminal focused until the copy toast confirms, and install the wl-clipboard package (provides wl-copy) for the most reliable route — Bucket shows a startup warning when this applies. If data-control misbehaves on your compositor, set BUCKET_CLIPBOARD_NO_DATA_CONTROL=1 to stop Bucket from speaking that protocol entirely — copies then go through the CLI tools (wl-copy/xclip).

Linux X11 selections: X11 PRIMARY and CLIPBOARD are separate. Selecting text usually fills PRIMARY; an explicit Copy action fills CLIPBOARD. In Bucket:

• An unmodified middle click reads PRIMARY only when DISPLAY is non-empty. Pure X11 can fall back to the native arboard reader. XWayland must have xclip or xsel on PATH; Bucket deliberately disables the arboard fallback there so it cannot substitute Wayland PRIMARY.
• Ctrl+V reads CLIPBOARD only and never falls back to PRIMARY. To fill CLIPBOARD from a shell, run printf %s "text" | xclip -selection clipboard.
• Shift+Insert remains the terminal-native selected-text paste. Native Wayland PRIMARY behavior is compositor/terminal-specific and is not inferred from TERM or an incoming mouse event.

SSH and selected text: a remote Bucket process usually cannot read the local terminal's PRIMARY or CLIPBOARD selection. Use terminal-native Shift+Insert, or hold Shift while middle-clicking when your terminal uses that gesture to bypass mouse reporting. The terminal then sends the local selection through the PTY instead of asking the remote process to access it.

Known limitation — Apple Terminal + SSH: Apple Terminal ignores OSC 52, so copying from a Bucket session over SSH can't reach your local clipboard. Use the workaround below.

Temporary workaround: Use bucket wrap ssh instead of plain ssh (for example, bucket wrap ssh user@host). It runs the command in a local PTY that intercepts OSC 52 sequences, including tmux-wrapped ones, and writes their contents to your local clipboard. The same command wraps anything else whose clipboard can't reach you — for example bucket wrap docker exec -it <container> bash or bucket wrap kubectl exec -it <pod> -- bash.

Warning: bucket wrap is experimental and may misbehave in some setups.

iTerm2 setting: iTerm2 requires explicit permission for OSC 52:

1. iTerm2 → Settings → General → Selection
2. Enable "Applications in terminal may access clipboard"

This setting is off by default for security reasons. Without it, OSC 52 writes from Bucket (or any TUI) will be ignored.

Fix for other cases:

• set -g set-clipboard on in tmux config
• For other terminals over SSH, switch to iTerm2, Ghostty, WezTerm, or Kitty for native OSC 52 support

Problem: Fullscreen / alternate screen not activating (inline mode)

Cause: Zellij, tmux control mode (tmux -CC), or config set to never.

Fix:

• In Zellij or control mode, Bucket intentionally runs inline (no alt screen).
• Set [terminal] alt_screen = "always" in ~/.bucket/pager.toml to force fullscreen.
• Use the CLI flag --no-alt-screen to disable alt-screen mode entirely (useful for debugging or when the alternate screen causes issues in your terminal).

Problem: Zellij keybindings interfere with Bucket (Ctrl+g, Ctrl+o, etc.)

Zellij intercepts many Ctrl/Alt key combinations before they reach full-screen TUIs like Bucket.

Best fix (Zellij 0.41+): Switch to the "Unlock-First (non-colliding)" preset:

1. Press Ctrl+o → c (open Configuration)
2. Go to "Change Mode Behavior"
3. Select "Unlock-First (non-colliding)"
4. Press Enter (or Ctrl+a to save permanently)

After this, Zellij starts locked. Most keys pass through to Bucket. Press Ctrl+g to temporarily unlock Zellij when you need its pane/session management.

Zellij recommends this approach for TUI users.

Problem: Ctrl+Enter doesn't interject in WezTerm

Cause: WezTerm ships with the Kitty keyboard protocol disabled. Bucket relies on it to tell Ctrl+Enter (interject) and Shift+Enter (send in multiline mode) apart from plain Enter. Most other terminals enable the protocol when Bucket requests it.

For the same reason, in Apple Terminal, Bucket binds Ctrl+O to interject.

Fix:

Add this after config = wezterm.config_builder() in ~/.config/wezterm/wezterm.lua:

config.enable_kitty_keyboard = true

Reload (Cmd+Shift+R or restart WezTerm) and restart bucket.

Verify: Run /terminal-setup inside Bucket. While a turn is active, you see the interject hint, and Ctrl+Enter interjects.

Quick workaround (no global change):

table.insert(config.keys, {
  key = "Enter",
  mods = "CTRL",
  action = wezterm.action.SendString("\x1b[13;5u"),
})

Problem: Shift+Enter doesn't insert a newline in VS Code

Cause: VS Code's integrated terminal (and the Cursor / Windsurf / Zed forks) use xterm.js, which only partially implements the Kitty keyboard protocol — it mis-encodes shifted printable keys (!@#$%^&*() arrive as plain digits). Bucket therefore never negotiates the protocol for these terminals. Without it, xterm.js sends a bare CR for Shift+Enter, byte-for-byte identical to plain Enter, so the chord can't be told apart and the prompt submits.

This also affects VS Code reached over SSH (e.g. into a devbox or container): TERM_PROGRAM isn't forwarded, so Bucket sees an Unknown terminal and skips the protocol for the same reason.

Fix: Use Alt+Enter to insert a newline. xterm.js delivers it reliably as ESC+CR regardless of the keyboard protocol, and Bucket's prompt hint bar advertises Alt+Enter: newline whenever it detects this situation. Run /terminal-setup to confirm — the newline row shows Alt+Enter when Shift+Enter is unavailable.

Problem: Mouse scrolling stops working (native scrollbar takes over)

If Bucket's mouse-driven scrolling stops responding and your terminal falls back to its native scrollbar, mouse reporting is off.

Apple Terminal: Go to View > Allow Mouse Reporting (keyboard shortcut Cmd+R) to re-enable it. A checkmark appears next to the option when active.

iTerm2: Open Settings (Cmd+,) → Profiles → Terminal → ensure "Enable mouse reporting" is checked. Alternatively, restart iTerm2.

Problem: Byobu + GNU screen

Byobu on screen has best-effort support only. Prefer Byobu on tmux.

---

Still Stuck?

Run /feedback to report it.