Bem Vindos / Welcome

Este são os profiles que utilizo nas minhas impressões 3D nas impressoras da Prusa - Mk3S, MK3S+ e Bear Prusa

This is my profiles which I have been using in my prints. This profiles can use for Prusa MK3S, MK3S+ and Bear Prusa

Prusa Slicer Folder

Contem os Profiles para os filamentos PLA e PETG.

Contains Profiles for PLA and PETG Filaments

This profiles have a mix between my Profiles and Chris Warkocki (https://github.com/codiac2600)

*OlderProfiles

 PLA - \PrusaSlicer\olderProfiles\Ops3DProfile-PLA-v1.0.ini
 PLA - \PrusaSlicer\olderProfiles\Ops3DProfile-PLA-v2.0.ini
 PLA - \PrusaSlicer\olderProfiles\Ops3DProfile-PLA-v2.1.ini
 PLA - \PrusaSlicer\olderProfiles\Ops3DProfile-PLA-v2.2-0.15mm.ini

*2.3.0

 PLA Bundle - \PrusaSlicer\2.3.0\Bundle Config\Ops3d-BundleConfig.ini
 PLA - \PrusaSlicer\2.3.0\-> A lot of files and Configs (0.08, 0.12, 0.15, 0.2, vaseMode, etc)
 PETG - \PrusaSlicer\2.3.0\PETG\PETG-v3.0-0.25mm.ini

*2.3.1

 PLA BMG Bundle - \PrusaSlicer\2.3.1\BMG\PLA\Ops3D-0.2_bundle.ini
 PLA STOCK Bundle - \PrusaSlicer\2.3.1\Stock\PLA\Ops3D-02-base_config_bundle.ini
 PETG - Comming Soon (Tests Mode)

Cura Folder

Contem os Profiles para os filamentos PLA e PETG.

Contains Profiles for PLA and PETG Filaments (Cooming soon)

 PLA - \Cura\Ops3d-Pretty-PLA-0.15-TreeSupport.curaprofile
 PETG - Comming Soon

Simplify3D Folder

Contains Profiles for PLA

  PLA - \Simplify\MK3S - Ops3D.fff
  PETG - Comming Soon

Super Slicer Folder

Contains Profiles for PLA

  PLA - \SuperSlicer\Bundle\2.3.5x\SuperSlicer_config_bundle.ini
  PETG - Comming Soon