7.0.0

[juzzlin]

Release date:

Wed, 19 Aug 2026 21:27:02 +0300

New features:

• Add the Mixer view

• Add new rack effects

  • Stereo Widener: width per band, so the top can be opened up while the
    bottom is pulled together or centred outright
  • Stereo Field Meter: a goniometer with correlation broadband and per
    band, mid and side levels and balance
  • Dimension: builds width out of the centre of the mix, and no setting
    of it can cost a mono listener anything
  • Early Reflections: the room a sound is in, without a tail
  • Multiband Compressor, Phaser, Auto Filter
  • Bass Grinder, Stereo Enhancer, Stereo Exciter, Tube Stage, Wave Designer

• Add new devices

  • Piano Synth V2, voiced against a Yamaha CP80 recording: a bank of
    resonators, one per partial
  • Kick808

• Add Dual, Supersaw, Drift and Mono voice modes to the Wavetable Synth

  • Existing projects keep their voice mode: the ordinals are unchanged

• Add new wavetables to the Wavetable Synth

  • Pulse Width, Vocal Formant, Resonant Sweep and Organ Drawbar
  • Wavetables are now built on first use instead of at startup

• Add Curve to the Amp EG and Mod EG of the Synth and the Wavetable Synth

  • Bends the envelope segments into the analog shape a pluck needs
  • Existing projects keep their straight lines: the knob defaults to zero

• Add the Mono voice mode, the 32' footage and the Pitch 1, Pitch 2 and
  Pitch 3 LFO targets to the Synth

• Add Pitch Bend Range to the Bass Synth

  • Existing projects keep the previous fixed range of 2 semitones

• Add the RMS detector mode to the Compressor

• Add a live integrated (I) reading to the LUFS Meter

  • Gated per ITU-R BS.1770-4, updated as the song plays

• Add typing exact values and finer wheel steps to knobs

  • Double-click the readout to type a value; units are understood, as in
    -3 dB, 250 ms, 1.5 kHz, L50 or Bypass
  • Ctrl + wheel steps ten times finer, Shift + wheel five times coarser

• Add Ok and Cancel to the rack effect dialogs

  • Cancel puts back the settings the effect had when the dialog opened

• Fit the visible track count to the editor width

  • A narrow editor shows fewer, wider columns instead of six cramped ones,
    and a wide one shows more than six

• Add Delete current column, Move column to the left and Move column to
  the right to the Column context menu

  • A deleted column is only hidden: adding a column back restores it with
    its notes, automations and mixer settings
  • Moving past either end wraps around

• Add column insertion to the column context menu

• Add Move track to the left and Move track to the right to the Track
  context menu

  • A new pattern now copies the track order instead of laying the tracks
    out by index

• Add Play, Stop and Rewind to the Song menu

  • F5, F6 and F8 also work while a dialog is open, unlike the toolbar

• Add pad-specific MIDI CCs to the Sampler

  • Each of the 16 pads has its own Pan, Volume, LPF and HPF CC
  • Fixes pad CCs in channel mode overriding the device-wide pan and
    cutoff instead of combining with them

• Add a context menu to Sampler pads

  • Right-click offers Clear and Copy from pad, which brings the sample,
    the pad settings and the per-pad insert effects

• Add curve selection to the automation add dialogs

• Accept pan on every note column instead of only the first one

  • MIDI CC 10 is channel-wide, so values on the same line are averaged
  • Pan is sent on the line's own tick, so a delayed note starts panned

• Save the loudness analysis as a text file when rendering

  • Written beside the rendered file as .loudness.txt

• Add the fade out and tail silence options to the audio export

• Follow the VC340's register structure in the StringVoice

  • There is no Female 8' on a VC340, so that register became the upper
    register's Male 8'; older projects find their value there

• Add a Balance section to the StringVoice, below the Strings section

• Open the Manage menu by right-clicking a row on the device rack, the
  master effects and the device insert effects

• Open the Limiter and RTA editors from a device insert slot

Bug fixes:

• Fix the top tenth of the Endless Reverb's Damping doing nothing

  • Its value was clamped before reaching the filter, so the last stretch
    of the knob changed nothing
  • Damping now maps to a corner frequency, as it does in the other
    reverbs, so existing projects sound slightly different at any
    non-zero Damping

• Fix the Piano

  • Let the top octaves speak and ring
  • Play in tune across the keyboard
  • Keep the bottom octave in tune above 48 kHz
  • Stop the hammer strikes stacking up in a chord
  • Keep Brightness and Hardness working on hard-struck notes
  • Give the unison pairs something to beat against

• Fix the StringVoice

  • Sing the male voice at the vowel a VC340 sings
  • Make the voice section sing a vowel

• Fix the Synth's Phase Sync firing only on some notes

  • It skipped any voice that was still sounding, which is every repeated
    note in Poly and every note at all in the stacked voice modes

• Fix the Wavetable Synth modulating far deeper than its Intensity knobs
  read out, which made subtle LFO and Mod Envelope settings impossible

• Fix the Wavetable Synth's last three LFO targets doing nothing

  • Volume, Resonance and Pan can now be selected for both LFOs

• Fix the Wavetable Synth's Pitch Bend Range not being saved

• Fix the Wavetable Synth's Mod Envelope sustain knob springing back

• Fix the clicks from modulating the Wavetable Synth's Pos, most audible
  with a random or square LFO, by gliding the morph position

• Remove a DC offset from the Synth's output

• Fix Cancel not cancelling anything in the device dialogs

  • Cancel now puts back the settings the device had when the dialog opened
  • Escape and a click outside still close the dialog keeping the edits

• Fix Sampler dialog cancel not undoing per-pad insert effect edits

• Fix the mouse wheel doing nothing on knobs in device and effect dialogs

  • A dialog now drops its modality while another dialog covers it

• Fix arrow keys barely moving most knobs

  • A focused knob now steps by a thousandth of its range either way

• Fix the Settings dialog overflowing on small displays

  • Every tab now scrolls when its content is taller than the dialog

• Fix the keyboard being cut off or missing in the device dialogs

  • The keyboard keeps its height and the module areas scroll instead

• Fix the rack dialogs being smaller than the Mixer

  • Rack rows shorten the device name instead of running over the buttons

• Fix dialog buttons being stretched across the whole footer

  • Device and effect dialogs keep the full-width buttons, so that Cancel
    and its lost edits are harder to hit by accident

• Fix automations spanning a single line not being drawn at all

  • Also fixes a longer automation vanishing when scrolled so that only
    its first or last line is visible

• Fix a column scrolling into view showing the wrong lines

• Fix the level meters staying dead for a device added or replaced while
  the Device Rack or Mixer is open

• Fix the LUFS Meter and dBTP Meter readings shifting along the effect
  rack row as a value gains or loses a digit

• Fix the loudness reported for an exported song depending on how much
  silence it trails off into, by up to 3 dB

• Fix crash on cancelling the Sampler dialog during playback

• Stop rewinding from marking the song modified

• Stop burning CPU on a stopped song

  • The audio workers are no longer woken for a block with nothing in it
  • An effect reads its Mix and Solo once a block instead of once a sample

Other:

• Move the render progress into a dialog of its own

• Show the stereo mode in the EQ 8-Band Parametric rack preview

• Show the detector mode in the Compressor rack preview

• Give the virtual keyboard a more instrument-like look

  • Shaded keys with rounded fronts, gloss and a shadow under the black
    keys, and a felt strip along the back in the accent colour

• Lay the StringVoice dialog out in five equal columns

• Group the device actions of a track under a Device sub-menu

• Document the new effects in the built-in manual

  • Stereo Widener, Dimension, Stereo Field Meter and Early Reflections
    were missing from the effect list and had no parameter sections

---

This discussion was created from the release 7.0.0.