我用 Seeed Studio XIAO ESP32 C6 接管原機的 42×9 LED 面板。你可以只用它顯示自己的圖案，也可以裝上我做好的 Wi-Fi 時鐘。
I use a Seeed Studio XIAO ESP32 C6 to take over the original 42×9 LED panel. You can display your own patterns or use my finished Wi-Fi clock.
這項改造需要拆除小型 SMD 電阻，並在細小焊盤上焊線。我建議有 SMD 焊接經驗的人操作，拆焊與剪線前先斷電。
This modification requires removing small SMD resistors and soldering wires to tiny pads. I recommend it for people with SMD soldering experience. Disconnect power before desoldering or cutting wires.
| 先看哪裡 / Start here | 內容 / What you will find |
|---|---|
| 硬體改造教學 / Hardware guide | LED 接線、D44 二極體、選配的按鍵與蜂鳴器，以及所需照片。 LED wiring, the D44 diode, optional buttons and buzzer, and the relevant photos. |
| Basic Display | 只接管面板顯示圖案；不需要 Wi-Fi、按鍵或時鐘功能。 Display your own patterns without Wi-Fi, buttons, or clock features. |
| Wi-Fi Clock | 完成版程式、首次連網，以及網頁和實體按鍵操作。 The complete firmware, first-time Wi-Fi setup, web controls, and physical buttons. |
我建議先看硬體教學，再選擇要上傳哪一份程式。你可以把這個 GitHub 專案連結貼給 AI，告訴它你選的程式和開發板 XIAO ESP32 C6，請它協助安裝套件、上傳或修改用途。你也可以自行使用 Arduino IDE 上傳。
I recommend reading the hardware guide first, then choosing which program to upload. You can give this GitHub link to an AI assistant, specify the program and XIAO ESP32 C6 board, and ask for help installing libraries, uploading, or adapting the project. You can also upload it yourself with Arduino IDE.
本專案使用 Arduino-ESP32、ArduinoJson、Open-Meteo 與 Clock Pixel 9 字型。字型的上游紀錄 / upstream record和 SIL OFL 1.1 授權 / license隨程式保留。Bad Apple 黑白影格的來源紀錄為 SillyTavern-BadApple 影片 / video。本儲存庫未指定整體開源授權。
This project uses Arduino-ESP32, ArduinoJson, Open-Meteo, and the Clock Pixel 9 font. The font's upstream record and SIL OFL 1.1 license are included above; the linked SillyTavern-BadApple video records the source of the monochrome frames. No license has been specified for the repository as a whole.