[pull] master from torvalds:master#398
Merged
pull[bot] merged 16 commits intoksti:masterfrom May 8, 2020
Merged
Conversation
wakeup_rt.tc and wakeup.tc tests in tracers/ subdirectory fail due to the chrt command returning: chrt: failed to set pid 0's policy: Operation not permitted. To work around this, temporarily disable grout RT scheduling during ftracetest execution. Restore original value on test run completion. With these changes in place, both tests consistently pass. Fixes: c575dea ("selftests/ftrace: Add wakeup_rt tracer testcase") Fixes: c1edd06 ("selftests/ftrace: Add wakeup tracer testcase") Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
…lved set Currently, ftracetest will return 1 (failure) if any unresolved cases are encountered. The unresolved status results from modules and programs not being available, and as such does not indicate any issues with ftrace itself. As such, change the behaviour of ftracetest in line with unsupported cases; if unsupported cases happen, ftracetest still returns 0 unless --fail-unsupported. Here --fail-unresolved is added and the default is to return 0 if unresolved results occur. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since XFAIL (Expected Failure) is expected to fail the test, which means that test case works as we expected. IOW, XFAIL is same as PASS. So make it green. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kvm test Makefile doesn't fully support cross-builds and installs. UNAME_M = $(shell uname -m) variable is used to define the target programs and libraries to be built from arch specific sources in sub-directories. For cross-builds to work, UNAME_M has to map to ARCH and arch specific directories and targets in this Makefile. UNAME_M variable to used to run the compiles pointing to the right arch directories and build the right targets for these supported architectures. TEST_GEN_PROGS and LIBKVM are set using UNAME_M variable. LINUX_TOOL_ARCH_INCLUDE is set using ARCH variable. x86_64 targets are named to include x86_64 as a suffix and directories for includes are in x86_64 sub-directory. s390x and aarch64 follow the same convention. "uname -m" doesn't result in the correct mapping for s390x and aarch64. Fix it to set UNAME_M correctly for s390x and aarch64 cross-builds. In addition, Makefile doesn't create arch sub-directories in the case of relocatable builds and test programs under s390x and x86_64 directories fail to build. This is a problem for native and cross-builds. Fix it to create all necessary directories keying off of TEST_GEN_PROGS. The following use-cases work with this change: Native x86_64: make O=/tmp/kselftest -C tools/testing/selftests TARGETS=kvm install \ INSTALL_PATH=$HOME/x86_64 arm64 cross-build: make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \ CROSS_COMPILE=aarch64-linux-gnu- defconfig make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \ CROSS_COMPILE=aarch64-linux-gnu- all make kselftest-install TARGETS=kvm O=$HOME/arm64_build ARCH=arm64 \ HOSTCC=gcc CROSS_COMPILE=aarch64-linux-gnu- s390x cross-build: make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \ CROSS_COMPILE=s390x-linux-gnu- defconfig make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \ CROSS_COMPILE=s390x-linux-gnu- all make kselftest-install TARGETS=kvm O=$HOME/s390x_build/ ARCH=s390 \ HOSTCC=gcc CROSS_COMPILE=s390x-linux-gnu- all No regressions in the following use-cases: make -C tools/testing/selftests TARGETS=kvm make kselftest-all TARGETS=kvm Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If there is a bootconfig data in the tail of initrd/initramfs, initrd image sanity check caused an error while decompression stage as follows. [ 0.883882] Unpacking initramfs... [ 2.696429] Initramfs unpacking failed: invalid magic at start of compressed archive This error will be ignored if CONFIG_BLK_DEV_RAM=n, but CONFIG_BLK_DEV_RAM=y the kernel failed to mount rootfs and causes a panic. To fix this issue, shrink down the initrd_end for removing tailing bootconfig data while boot the kernel. Link: http://lkml.kernel.org/r/158788401014.24243.17424755854115077915.stgit@devnote2 Cc: Borislav Petkov <bp@alien8.de> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: 7684b85 ("bootconfig: Load boot config from the tail of initrd") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix a typo that resulted in an unnecessary double initialization to addr. Link: http://lkml.kernel.org/r/158779374968.6082.2337484008464939919.stgit@devnote2 Cc: Tom Zanussi <zanussi@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Fixes: c7411a1 ("tracing/kprobe: Check whether the non-suffixed symbol is notrace") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix boottime kprobe events to use API correctly for
multiple events.
For example, when we set a multiprobe kprobe events in
bootconfig like below,
ftrace.event.kprobes.myevent {
probes = "vfs_read $arg1 $arg2", "vfs_write $arg1 $arg2"
}
This cause an error;
trace_boot: Failed to add probe: p:kprobes/myevent (null) vfs_read $arg1 $arg2 vfs_write $arg1 $arg2
This shows the 1st argument becomes NULL and multiprobes
are merged to 1 probe.
Link: http://lkml.kernel.org/r/158779375766.6082.201939936008972838.stgit@devnote2
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 29a1548 ("tracing: Change trace_boot to use kprobe_event interface")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reject the new event which has NULL location for kprobes. For kprobes, user must specify at least the location. Link: http://lkml.kernel.org/r/158779376597.6082.1411212055469099461.stgit@devnote2 Cc: Tom Zanussi <zanussi@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Fixes: 2a588dd ("tracing: Add kprobe event command generation functions") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Running on a slower machine, it is possible that the preempt delay kernel thread may still be executing if the module was immediately removed after added, and this can cause the kernel to crash as the kernel thread might be executing after its code has been removed. There's no reason that the caller of the code shouldn't just wait for the delay thread to finish, as the thread can also be created by a trigger in the sysfs code, which also has the same issues. Link: http://lore.kernel.org/r/5EA2B0C8.2080706@cn.fujitsu.com Cc: stable@vger.kernel.org Fixes: 7939372 ("lib: Add module for testing preemptoff/irqsoff latency tracers") Reported-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Reviewed-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Reviewed-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
x86_64 lazily maps in the vmalloc pages, and the way this works with per_cpu areas can be complex, to say the least. Mappings may happen at boot up, and if nothing synchronizes the page tables, those page mappings may not be synced till they are used. This causes issues for anything that might touch one of those mappings in the path of the page fault handler. When one of those unmapped mappings is touched in the page fault handler, it will cause another page fault, which in turn will cause a page fault, and leave us in a loop of page faults. Commit 763802b ("x86/mm: split vmalloc_sync_all()") split vmalloc_sync_all() into vmalloc_sync_unmappings() and vmalloc_sync_mappings(), as on system exit, it did not need to do a full sync on x86_64 (although it still needed to be done on x86_32). By chance, the vmalloc_sync_all() would synchronize the page mappings done at boot up and prevent the per cpu area from being a problem for tracing in the page fault handler. But when that synchronization in the exit of a task became a nop, it caused the problem to appear. Link: https://lore.kernel.org/r/20200429054857.66e8e333@oasis.local.home Cc: stable@vger.kernel.org Fixes: 737223f ("tracing: Consolidate buffer allocation code") Reported-by: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com> Suggested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This change updates the improper comment for the 'size' attribute in the tracepoint definition. Most gfx drivers pre-fault in physical pages instead of making virtual allocations. So we drop the 'Virtual' keyword here and leave this to the implementations. Link: http://lkml.kernel.org/r/20200428220825.169606-1-zzyiwei@google.com Signed-off-by: Yiwei Zhang <zzyiwei@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As the example below shows, DECLARE_EVENT_CLASS() is used instead of DEFINE_EVENT_CLASS(). Link: http://lkml.kernel.org/r/20200428214959.11259-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix the following sparse warning: kernel/trace/trace.c:950:6: warning: symbol 'tracing_snapshot_instance_cond' was not declared. Should it be static? Link: http://lkml.kernel.org/r/1587614905-48692-1-git-send-email-zou_wei@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix the @DaTa and @fd allocations that are leaked in the error path of apply_xbc(). Link: http://lkml.kernel.org/r/583a49c9-c27a-931d-e6c2-6f63a4b18bea@huawei.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
…inux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "ftrace test fixes and a fix to kvm Makefile for relocatable native/cross builds and installs" * tag 'linux-kselftest-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: fix kvm relocatable native/cross builds and installs selftests/ftrace: Make XFAIL green color ftrace/selftest: make unresolved cases cause failure if --fail-unresolved set ftrace/selftests: workaround cgroup RT scheduling issues
…el/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Fix bootconfig causing kernels to fail with CONFIG_BLK_DEV_RAM enabled - Fix allocation leaks in bootconfig tool - Fix a double initialization of a variable - Fix API bootconfig usage from kprobe boot time events - Reject NULL location for kprobes - Fix crash caused by preempt delay module not cleaning up kthread correctly - Add vmalloc_sync_mappings() to prevent x86_64 page faults from recursively faulting from tracing page faults - Fix comment in gpu/trace kerneldoc header - Fix documentation of how to create a trace event class - Make the local tracing_snapshot_instance_cond() function static * tag 'trace-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tools/bootconfig: Fix resource leak in apply_xbc() tracing: Make tracing_snapshot_instance_cond() static tracing: Fix doc mistakes in trace sample gpu/trace: Minor comment updates for gpu_mem_total tracepoint tracing: Add a vmalloc_sync_mappings() for safe measure tracing: Wait for preempt irq delay thread to finish tracing/kprobes: Reject new event if loc is NULL tracing/boottime: Fix kprobe event API usage tracing/kprobes: Fix a double initialization typo bootconfig: Fix to remove bootconfig data from initrd while boot
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
8 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]. Want to support this open source service? Please star it : )