Allow to specify a list of names as PEERS and add ALLOWEDIPS environment variable

readme-vars.yml

@@ -44,9 +44,10 @@ opt_param_usage_include_env: true
 opt_param_env_vars:
   - { env_var: "SERVERURL", env_value: "wireguard.domain.com", desc: "External IP or domain name for docker host. Used in server mode. If set to `auto`, the container will try to determine and set the external IP automatically"}
   - { env_var: "SERVERPORT", env_value: "51820", desc: "External port for docker host. Used in server mode."}
-  - { env_var: "PEERS", env_value: "1", desc: "Number of peers to create confs for. Required for server mode."}
+  - { env_var: "PEERS", env_value: "1", desc: "Number of peers to create confs for. Required for server mode. Can be a list of names too: myPC,myPhone,myTablet..."}
   - { env_var: "PEERDNS", env_value: "auto", desc: "DNS server set in peer/client configs (can be set as `8.8.8.8`). Used in server mode. Defaults to `auto`, which uses wireguard docker host's DNS via included CoreDNS forward."}
   - { env_var: "INTERNAL_SUBNET", env_value: "10.13.13.0", desc: "Internal subnet for the wireguard and server and peers (only change if it clashes). Used in server mode."}
+  - { env_var: "ALLOWEDIPS", env_value: "192.168.1.0/24,192.168.2.0/24", desc: "The IPs/Ranges that the peers will be able to reach using the VPN connection. If not specified the default value is: '0.0.0.0/0, ::0/0'"}
 
 optional_block_1: false
 optional_block_1_items: ""
@@ -63,13 +64,13 @@ app_setup_block: |
   This can be run as a server or a client, based on the parameters used. 
 
   ## Server Mode
-  If the environment variable `PEERS` is set to a number, the container will run in server mode and the necessary server and peer/client confs will be generated. The peer/client config qr codes will be output in the docker log. They will also be saved in text and png format under `/config/peerX`.
+  If the environment variable `PEERS` is set to a number or a list of strings separated by comma, the container will run in server mode and the necessary server and peer/client confs will be generated. The peer/client config qr codes will be output in the docker log. They will also be saved in text and png format under `/config/peerX` in case `PEERS` is a variable and an integer or `/config/peer_X` in case a list of names was provided instead of an integer.
 
   Variables `SERVERURL`, `SERVERPORT`, `INTERNAL_SUBNET` and `PEERDNS` are optional variables used for server mode. Any changes to these environment variables will trigger regeneration of server and peer confs. Peer/client confs will be recreated with existing private/public keys. Delete the peer folders for the keys to be recreated along with the confs.
 
-  To add more peers/clients later on, you increment the `PEERS` environment variable and recreate the container.
+  To add more peers/clients later on, you increment the `PEERS` environment variable or add more elements to the list and recreate the container.
 
-  To display the QR codes of active peers again, you can use the following command and list the peer numbers as arguments: `docker exec -it wireguard /app/show-peer 1 4 5` (Keep in mind that the QR codes are also stored as PNGs in the config folder).
+  To display the QR codes of active peers again, you can use the following command and list the peer numbers as arguments: `docker exec -it wireguard /app/show-peer 1 4 5` or `docker exec -it wireguard /app/show-peer myPC myPhone myTablet` (Keep in mind that the QR codes are also stored as PNGs in the config folder).
 
   The templates used for server and peer confs are saved under `/config/templates`. Advanced users can modify these templates and force conf generation by deleting `/config/wg0.conf` and restarting the container.
 
@@ -102,6 +103,7 @@ app_setup_block: |
 
 # changelog
 changelogs:
+  - { date: "04.10.20:", desc: "Allow to specify a list of names as PEERS and add ALLOWEDIPS environment variable. Also, add peer name/id to each one of the peer sections in wg0.conf. Important: Existing users need to delete `/config/templates/peer.conf` and restart" }
   - { date: "27.09.20:", desc: "Cleaning service binding example to have accurate PreDown script." }
   - { date: "06.08.20:", desc: "Replace resolvconf with openresolv due to dns issues when a client based on this image is connected to a server also based on this image. Add IPv6 info to readme. Display kernel version in logs." }
   - { date: "29.07.20:", desc: "Update Coredns config to detect dns loops (existing users need to delete `/config/coredns/Corefile` and restart)." }

root/app/show-peer

@@ -5,14 +5,17 @@ if [ ! $# -gt 0 ]; then
   exit 0
 fi
 
-INTERNAL_SUBNET=${INTERNAL_SUBNET:-10.13.13.0}
-INTERFACE=$(echo "$INTERNAL_SUBNET" | awk 'BEGIN{FS=OFS="."} NF--')
-
 for i in "$@"; do
-  if grep -q "AllowedIPs = ${INTERFACE}.$(( $i + 1 ))/32" /config/wg0.conf; then
-    echo "PEER $i QR code:"
-    qrencode -t ansiutf8 < /config/peer${i}/peer${i}.conf
+  if [[ "${i}" =~ ^[0-9]+$ ]]; then
+    PEER_ID="peer${i}"
+  else
+    PEER_ID="peer_${i//[^[:alnum:]_-]/}"
+  fi
+
+  if grep -q "# ${PEER_ID}" /config/wg0.conf; then
+    echo "PEER ${i} QR code:"
+    qrencode -t ansiutf8 < /config/${PEER_ID}/${PEER_ID}.conf
   else
-    echo "PEER $i is not active"
+    echo "PEER ${i} is not active"
   fi
 done

root/defaults/peer.conf

@@ -1,10 +1,10 @@
 [Interface]
-Address = ${INTERFACE}.$(( $i + 1 ))
-PrivateKey = $(cat /config/peer${i}/privatekey-peer${i})
+Address = ${CLIENT_IP}
+PrivateKey = $(cat /config/${PEER_ID}/privatekey-${PEER_ID})
 ListenPort = 51820
 DNS = ${PEERDNS}
 
 [Peer]
 PublicKey = $(cat /config/server/publickey-server)
 Endpoint = ${SERVERURL}:${SERVERPORT}
-AllowedIPs = 0.0.0.0/0, ::/0
+AllowedIPs = ${ALLOWEDIPS}

root/etc/cont-init.d/30-config

@@ -172,44 +172,64 @@ generate_confs () {
 `cat /config/templates/server.conf`
 
 DUDE"
-  for i in $(seq 1 $PEERS); do
-    mkdir -p /config/peer${i}
-    if [ ! -f "/config/peer${i}/privatekey-peer${i}" ]; then
+  for i in ${PEERS_ARRAY[@]}; do
+    if [[ "${i}" =~ ^[0-9]+$ ]]; then
+      PEER_ID="peer${i}"
+    else
+      PEER_ID="peer_${i//[^[:alnum:]_-]/}"
+    fi
+    mkdir -p /config/${PEER_ID}
+    if [ ! -f "/config/${PEER_ID}/privatekey-${PEER_ID}" ]; then
       umask 077
-      wg genkey | tee /config/peer${i}/privatekey-peer${i} | wg pubkey > /config/peer${i}/publickey-peer${i}
+      wg genkey | tee /config/${PEER_ID}/privatekey-${PEER_ID} | wg pubkey > /config/${PEER_ID}/publickey-${PEER_ID}
+    fi
+    if [ -f "/config/${PEER_ID}/${PEER_ID}.conf" ]; then
+      CLIENT_IP=$(cat /config/${PEER_ID}/${PEER_ID}.conf | grep "Address" | awk '{print $NF}')
+    else
+      for idx in {2..254}; do
+        PROPOSED_IP="${INTERFACE}.${idx}"
+        if ! grep -q -R "${PROPOSED_IP}" /config/peer*/*.conf; then
+          CLIENT_IP="${PROPOSED_IP}"
+          break
+        fi
+      done
     fi
     eval "`printf %s`
-    cat <<DUDE > /config/peer${i}/peer${i}.conf
+    cat <<DUDE > /config/${PEER_ID}/${PEER_ID}.conf
 `cat /config/templates/peer.conf`
 DUDE"
     cat <<DUDE >> /config/wg0.conf
 [Peer]
-PublicKey = $(cat /config/peer${i}/publickey-peer${i})
-AllowedIPs = ${INTERFACE}.$(( $i + 1 ))/32
+# ${PEER_ID}
+PublicKey = $(cat /config/${PEER_ID}/publickey-${PEER_ID})
+AllowedIPs = ${CLIENT_IP}/32
 
 DUDE
     echo "PEER ${i} QR code:"
-    qrencode -t ansiutf8 < /config/peer${i}/peer${i}.conf
-    qrencode -o /config/peer${i}/peer${i}.png < /config/peer${i}/peer${i}.conf
+    qrencode -t ansiutf8 < /config/${PEER_ID}/${PEER_ID}.conf
+    qrencode -o /config/${PEER_ID}/${PEER_ID}.png < /config/${PEER_ID}/${PEER_ID}.conf
   done
 }
 
 save_vars () {
   cat <<DUDE > /config/.donoteditthisfile
-ORIG_SERVERURL=$SERVERURL
-ORIG_SERVERPORT=$SERVERPORT
-ORIG_PEERDNS=$PEERDNS
-ORIG_PEERS=$PEERS
-ORIG_INTERFACE=$INTERFACE
+ORIG_SERVERURL="$SERVERURL"
+ORIG_SERVERPORT="$SERVERPORT"
+ORIG_PEERDNS="$PEERDNS"
+ORIG_PEERS="$PEERS"
+ORIG_INTERFACE="$INTERFACE"
+ORIG_ALLOWEDIPS="$ALLOWEDIPS"
 DUDE
 }
 
 if [ -n "$PEERS" ]; then
   echo "**** Server mode is selected ****"
-  if ! [[ "$PEERS" =~ ^[0-9]+$ ]]; then
-    echo "**** PEERS is not set to an integer, setting it to 1 ****"
-    PEERS="1"
+  if [[ "$PEERS" =~ ^[0-9]+$ ]] && ! [[ "$PEERS" =~ *,* ]]; then
+    PEERS_ARRAY=($(seq 1 $PEERS))
+  else
+    PEERS_ARRAY=($(echo "$PEERS" | tr ',' ' '))
   fi
+  PEERS_COUNT=$(echo "${#PEERS_ARRAY[@]}")
   if [ -z "$SERVERURL" ] || [ "$SERVERURL" = "auto" ]; then
     SERVERURL=$(curl icanhazip.com)
     echo "**** SERVERURL var is either not set or is set to \"auto\", setting external IP to auto detected value of $SERVERURL ****"
@@ -221,22 +241,24 @@ if [ -n "$PEERS" ]; then
   INTERNAL_SUBNET=${INTERNAL_SUBNET:-10.13.13.0}
   echo "**** Internal subnet is set to $INTERNAL_SUBNET ****"
   INTERFACE=$(echo "$INTERNAL_SUBNET" | awk 'BEGIN{FS=OFS="."} NF--')
+  ALLOWEDIPS=${ALLOWEDIPS:-0.0.0.0/0, ::/0}
+  echo "**** AllowedIPs for peers $ALLOWEDIPS ****"
   if [ -z "$PEERDNS" ] || [ "$PEERDNS" = "auto" ]; then
     PEERDNS="${INTERFACE}.1"
     echo "**** PEERDNS var is either not set or is set to \"auto\", setting peer DNS to ${INTERFACE}.1 to use wireguard docker host's DNS. ****"
   else
     echo "**** Peer DNS servers will be set to $PEERDNS ****"
   fi
   if [ ! -f /config/wg0.conf ]; then
-    echo "**** No found wg0.conf found (maybe an initial install), generating 1 server and $PEERS peer/client confs ****"
+    echo "**** No wg0.conf found (maybe an initial install), generating 1 server and ${PEERS} peer/client confs ****"
     generate_confs
     save_vars
   else
     echo "**** Server mode is selected ****"
     [[ -f /config/.donoteditthisfile ]] && \
       . /config/.donoteditthisfile
-    if [ "$SERVERURL" != "$ORIG_SERVERURL" ] || [ "$SERVERPORT" != "$ORIG_SERVERPORT" ] || [ "$PEERDNS" != "$ORIG_PEERDNS" ] || [ "$PEERS" != "$ORIG_PEERS" ] || [ "$INTERFACE" != "$ORIG_INTERFACE" ]; then
-      echo "**** Server related environment variables changed, regenerating 1 server and $PEERS peer/client confs ****"
+    if [ "$SERVERURL" != "$ORIG_SERVERURL" ] || [ "$SERVERPORT" != "$ORIG_SERVERPORT" ] || [ "$PEERDNS" != "$ORIG_PEERDNS" ] || [ "$PEERS" != "$ORIG_PEERS" ] || [ "$INTERFACE" != "$ORIG_INTERFACE" ] || [ "$ALLOWEDIPS" != "$ORIG_ALLOWEDIPS" ]; then
+      echo "**** Server related environment variables changed, regenerating 1 server and ${PEERS} peer/client confs ****"
       generate_confs
       save_vars
     else