Skip to content

Releases: lstepnio/WiFry

Release list

v0.1.56

v0.1.56 Latest
Latest

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 16:19
v0.1.56
d30ae78

WiFry - IP Video Edition 0.1.56

Flash Instructions

  1. Download wifry-0.1.56-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Assets 4
Loading

v0.1.55

v0.1.55

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 16:15
v0.1.55
c2e246c

WiFry - IP Video Edition 0.1.55

Flash Instructions

  1. Download wifry-0.1.55-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Loading

v0.1.54

v0.1.54

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 16:11
v0.1.54
873d77c

WiFry - IP Video Edition 0.1.54

Flash Instructions

  1. Download wifry-0.1.54-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Loading

v0.1.53

v0.1.53

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 15:58
v0.1.53
45e3c30

WiFry - IP Video Edition 0.1.53

Flash Instructions

  1. Download wifry-0.1.53-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Loading

v0.1.52

v0.1.52

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 10:24
v0.1.52
3d1defe

WiFry - IP Video Edition 0.1.52

Flash Instructions

  1. Download wifry-0.1.52-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Loading

v0.1.51

v0.1.51

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 10:08
v0.1.51
0dc10e1

WiFry - IP Video Edition 0.1.51

Flash Instructions

  1. Download wifry-0.1.51-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Loading

v0.1.50

v0.1.50

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 09:46
v0.1.50
80e1c1b

WiFry - IP Video Edition 0.1.50

Flash Instructions

  1. Download wifry-0.1.50-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Loading

v0.1.49

v0.1.49

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 09:39
v0.1.49
24e183b

WiFry - IP Video Edition 0.1.49

Flash Instructions

  1. Download wifry-0.1.49-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Loading

v0.1.48

v0.1.48

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 09:30
v0.1.48
d29f767

WiFry - IP Video Edition 0.1.48

Flash Instructions

  1. Download wifry-0.1.48-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Loading

v0.1.47

v0.1.47

Choose a tag to compare

View all tags
@lstepnio lstepnio released this 09 Apr 09:23
v0.1.47
0973ca5

WiFry - IP Video Edition 0.1.47

Flash Instructions

  1. Download wifry-0.1.47-rpi-arm64.img.xz
  2. Flash to SD card using Raspberry Pi Imager (choose "Use custom")
  3. Insert SD card into RPi 4B+ or 5, connect Ethernet, boot
  4. Wait ~5 minutes for first-boot setup (installs packages)
  5. Connect to WiFi SSID WiFry (password: wifry1234)
  6. Open http://192.168.4.1:8080 (served by wifry-backend)

Release Validation

Before this image was published, automation re-ran:

  • backend fast-feedback tests
  • backend release-risk tests
  • frontend lint, tests, type check, and build
  • deploy/release smoke validation for install and recovery paths
  • compressed image integrity checks

Default Credentials

  • WiFi: SSID WiFry, password wifry1234
  • SSH: user pi, password wifry
  • Fallback IP: 169.254.42.1 (direct Ethernet connection)

First Boot Requirements

  • Ethernet must be connected (downloads ~200MB of packages)
  • Takes ~5 minutes, then WiFi AP starts automatically
  • Subsequent boots are instant (no internet needed)
Loading