V0.3

.gitignore

@@ -1,5 +1,4 @@
 /target
 Cargo.lock
 simple.gcode
-test_transformed.gcode
-test.gcode
+test_transformed.gcode

readme.md

@@ -29,8 +29,20 @@ The application is programmed in rust with the [nannou library](https://nannou.c
 It furthermore supports a subcommand `transform`, which
 allows you to transform a file by translation and dilation.
 
+## Keyboard commands and editing features
+
 In the graphical app, a few keyboard commands are enabled. To increase a value corresponding to a <kbd>key</kbd>, just press <kbd>key</kbd> and to decrease press <kbd>shift</kbd> + <kbd>key</kbd>. For bigger steps combine these combination with a further <kbd>ctrl</kbd>.
 
+Furthermore, I introduced in Version 0.3.0 the ability to extend existing g-code files. Simply press
+- <kbd>1</kbd> for `G1` mode
+- <kbd>2</kbd> for `G2` mode
+- <kbd>3</kbd> for `G3` mode
+- <kbd>0</kbd> to exit the modes
+
+and choose the coordinate with a left mouse click. One also can now undo and redo these added commands with <kbd>Z</kbd> and <kbd>Y</kbd> and save these changes to a new file with <kbd>S</kbd>. <kbd>P</kbd> changes the penmode and <kbd>H</kbd> returns to to home.
+
+Last but not least, right-clicking prints the mouse coordinates to console.
+
 ## Room to improve
 
 While the app can be used for many purposes, it is in a early development phase. Tests are missing and not everything is programmed the clever way. If you want to improve it feel welcome to contribute.
@@ -39,5 +51,5 @@ TODO:
 - [ ] better loop management for hot reloading
 - [ ] more file maniplulation features
 - [ ] move in grid support
-- [ ] draw mode?
-- [ ] more debug options, e.g. show coordinates
+- [X] draw mode?
+- [ ] more debug options, e.g. show coordinates

src/parse.rs

@@ -14,6 +14,7 @@ pub enum GCodeExpr<'a> {
 
 /// without Comments, for faster and more memory efficient usecases
 #[allow(non_snake_case)]
+#[derive(Copy, Clone)]
 pub enum CommentlessGCodeExpr {
     Home,
     Move { X: f32, Y: f32 },
@@ -47,6 +48,21 @@ impl GCodeExpr<'_> {
     }
 }
 
+impl CommentlessGCodeExpr {
+    pub fn as_str(&self) -> String {
+        match self {
+            CommentlessGCodeExpr::Home => "G28".to_string(),
+            CommentlessGCodeExpr::Move{X: x, Y: y} => format!("G1 X{} Y{}", x, y),
+            CommentlessGCodeExpr::Arc{CLKW: clkw, X: x, Y: y, I: i, J: j} => if *clkw {
+                format!("G2 X{} Y{} I{} J{}", x, y, i, j)
+            } else {
+                format!("G3 X{} Y{} I{} J{}", x, y, i, j)
+            },
+            CommentlessGCodeExpr::Pen(down) => if *down { "M280 P0 S50".to_string() } else { "M280 P0 S0".to_string() },
+        }
+    }
+}
+
 #[derive(Parser)]
 #[grammar = "gcode.pest"]
 struct GCodeParser;
@@ -138,4 +154,15 @@ pub fn save(filename: &str, commands: Vec<(usize, GCodeExpr)>) {
         })
         //collect::<Vec<String>>().join("\n")
     ).expect("Unable to save the gcode.");
+}
+
+/// saves new commands on tope
+pub fn resave(filename: &str, commands: &Vec<CommentlessGCodeExpr>) {
+        let oldfile = std::fs::read_to_string(filename).expect("unable to open the file.");
+        std::fs::write(
+            format!("{}_added.gcode", filename.strip_suffix(".gcode").expect("Expected gcode file")),
+            format!("{}\n; added by gcodeplot\n{}", oldfile,
+                commands.iter().map(|cmd| cmd.as_str()).collect::<Vec<String>>().join("\n")
+            )
+        ).expect("Unable to save the gcode.");
 }

test.gcode

@@ -0,0 +1,21 @@
+G28
+G1 X10 Y10
+G1 X20 Y28
+M280 P0 S50
+G3 X18 Y30 I-2 J0
+G1 X14 Y30
+G3 X10 Y26 I0 J-4
+G1 X10 Y21
+G3 X11 Y20 I1 J0
+G1 X15 Y20
+G3 X17 Y22 I0 J2
+G1 X17 Y18
+G3 X15 Y20 I-2 J0
+M280 P0 S0
+G1 X11 Y20
+M280 P0 S50
+G3 X10 Y19 I0 J-1
+G1 X10 Y14
+G3 X14 Y10 I4 J0
+G1 X18 Y10
+G3 X20 Y12 I0 J2

test_added.gcode

@@ -0,0 +1,26 @@
+G28
+G1 X10 Y10
+G1 X20 Y28
+M280 P0 S50
+G3 X18 Y30 I-2 J0
+G1 X14 Y30
+G3 X10 Y26 I0 J-4
+G1 X10 Y21
+G3 X11 Y20 I1 J0
+G1 X15 Y20
+G3 X17 Y22 I0 J2
+G1 X17 Y18
+G3 X15 Y20 I-2 J0
+M280 P0 S0
+G1 X11 Y20
+M280 P0 S50
+G3 X10 Y19 I0 J-1
+G1 X10 Y14
+G3 X14 Y10 I4 J0
+G1 X18 Y10
+G3 X20 Y12 I0 J2
+; added by gcodeplot
+G1 X25 Y15
+G1 X30 Y10
+G2 X35 Y15 I5 J0
+G2 X30 Y20 I0 J5