[system] [error] Attempted to start Color camera - NOT detected!

[1384416715468713]

I receive my board, I receive error [system] [error] Attempted to start Color camera - NOT detected!
No color camera.
Is board error? Need replacement?
depthai 2.16.0.0
English is bad, sorry.

[Luxonis-Brandon]

Sorry about the trouble. Can you post a picture of the OAK model you are using?

[1384416715468713]

I have board with OV9782 RGB and OV9282 stereo.

[Luxonis-Brandon]

Got it yes this is because we have not yet mainlined that support yet. We're working on it, but it's a big merge so it will take some weeks. In the meantime @alex-luxonis can share the branch to use.

Likely come August we will have this mainline. We're hoping to have it in develop branch to soak in July.

[alex-luxonis]

@1384416715468713 Sorry for that, I'm on it. Can you use for now multi_cam_support, and if RGB and mono are both enabled, set the same resolution (THE_800_P or THE_720_P). To install directly:

python3 -m pip install --extra-index-url https://artifacts.luxonis.com/artifactory/luxonis-python-snapshot-local depthai==2.16.0.0.dev+9d866d9fa131a151ea592edb59b3d5e60649aef1

[1384416715468713]

Get error:

Version mismatch between installed depthai lib and the required one by the script.
Required: 2.16.0.0
Installed: 2.16.0.0.dev+9d866d9fa131a151ea592edb59b3d5e60649aef1
Run: python3 install_requirements.py

[alex-luxonis]

I pushed a branch ov9782_ov9282_demo on this repo, with some small changes to run on this setup:
https://github.com/luxonis/depthai/compare/ov9782_ov9282_demo

Edit: that would be to run with depthai_demo.py

[nrgsy]

Seeing this on our OAK-D Pro W PoE units as well. Running with depthai==2.16.0.0.dev+9d866d9fa131a151ea592edb59b3d5e60649aef1 does seem to help (RGB is cam detected).

But I am unable to get the depth image, node.io["DEPTH"].get() hangs indefinitely in our script node. That line works fine for the previous image types (RGB, MONOCHROME_LEFT, and MONOCHROME_RIGHT)

[rupa247]

Got it yes this is because we have not yet mainlined that support yet. We're working on it, but it's a big merge so it will take some weeks. In the meantime @alex-luxonis can share the branch to use.

Likely come August we will have this mainline. We're hoping to have it in develop branch to soak in July.

Hello.
Was this merged yet?
How can I use latest stable version? I tried latest release, from august.

@nrgsy were you able to fix your issue?

[alex-luxonis]

@rupa247 The configuration with the color cameras (OV9782 / IMX378) mounted on the RGB/Center/CAM-A port of the FFC baseboards is already supported in mainline (e.g. the latest release you tried).
It's possible there is a setup or hardware problem in your case, I added some notes on the other issue: #794 (comment)