Repository navigation
iSCSI
iSCSI provides block-level access to ZVols over the network — for hypervisors (VMware, Proxmox, Hyper-V), databases, and any workload that needs raw block storage.
iSCSI is an optional feature. Install it from Requisites → Optional Features → Enable iSCSI Feature (targetcli-fb):

The iSCSI Shares sidebar item appears once installed.
- Create a ZVol first — iSCSI targets are backed by ZVols (see Datasets & ZVols)
- Go to iSCSI Shares → Configure and set:
-
Base name — IQN prefix (e.g.
iqn.2026-01.com.example) - Port — TCP port (default 3260)
-
Base name — IQN prefix (e.g.
- Click + New iSCSI Share:
- ZVol — select the backing ZVol
-
Hosts — allowed initiator IQNs, or
ALL - Comment — optional
Initiator IQNs are stored once and reused across share definitions — add, edit, and remove them inline in the share modal.
Start / Stop / Restart buttons control the target service; the portal auto-detects the installed service name.
Linux (open-iscsi):
iscsiadm -m discovery -t sendtargets -p <server-ip>:3260
iscsiadm -m node --login
iscsiadm -m sessionWindows: iSCSI Initiator → Discovery → enter server IP and port 3260.
Proxmox: Datacenter → Storage → Add → iSCSI.
- Datasets & ZVols — creating the backing ZVols
- File Sharing — NFS — protocol comparison
Getting Started
Storage
- Dashboard & Monitoring
- Physical Disks
- ZFS Pools
- Datasets & ZVols
- MergerFS
- Snapshots & Protection
- File Sharing — SMB
- File Sharing — NFS
- iSCSI
- S3 Object Storage
- Capacity Trends
- Encryption
- UPS Management
Virtualization
Networking
Administration
Reference