dfu-util: Could not open file hackrf_one_usb.dfu for reading: No such file or directory

[miek]

HI,
I have the same issue, and am trying to recover the SPI Flash Firmware in DFU mode.

There seems to be a problem with "hackrf_one_usb.dfu" ===> "No such file or directory"

Please refer below:
"
andrew@pi-sdr:~/Desktop$ dfu-util --device 1fc9:000c --alt 0 --download hackrf_one_usb.dfu
dfu-util 0.9

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/

dfu-util: Could not open file hackrf_one_usb.dfu for reading: No such file or directory
andrew@pi-sdr:~/Desktop$
"
Please note that I am following the directions at:
https://mirrors.spacecruft.org/mossmann/hackrf_wiki/src/branch/master/Updating-Firmware.md

Originally posted by @4JAM4 in #396 (comment)

[miek]

In that command, hackrf_one_usb.dfu should point to the file where it has been extracted from the release package. You can either switch to the correct directory before running it with something like cd hackrf-2018.01.1/firmware-bin & run the above command again, or adjust the path in the command.

[4JAM4]

Hi meik,

Thank you for your assistance, problem sorted. I just needed to be in the right directory. I have attached the txt from the terminal below. It may help others. Note: you need to be in DFU mode, press the DFU button during power-up.
"
andrew@pi-sdr:/hackrf-2018.01.1/firmware-bin$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52e Logitech, Inc. MK260 Wireless Combo Receiver
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
andrew@pi-sdr:/hackrf-2018.01.1/firmware-bin$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 046d:c52e Logitech, Inc. MK260 Wireless Combo Receiver
Bus 001 Device 004: ID 1fc9:000c NXP Semiconductors LPC4330FET180 [ARM Cortex M4 + M0] (device firmware upgrade mode)
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
andrew@pi-sdr:~/hackrf-2018.01.1/firmware-bin$ dfu-util --device 1fc9:000c --alt 0 --download hackrf_one_usb.dfu
dfu-util 0.9

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/

dfu-util: DFU suffix CRC does not match
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
Opening DFU capable USB device...
ID 1fc9:000c
Run-time device DFU version 0100
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 0100
Device returned transfer size 2048
Copying data from PC to DFU device
Download [=========================] 100% 22056 bytes
Download done.
dfu-util: unable to read DFU status after completion
andrew@pi-sdr:/hackrf-2018.01.1/firmware-bin$ hackrf_spiflash -w hackrf_one_usb.bin
File size 22024 bytes.
Erasing SPI flash.
Writing 22024 bytes at 0x000000.
andrew@pi-sdr:/hackrf-2018.01.1/firmware-bin$

[miek]

Great, glad it's sorted!

[adammanella]

is it normal to have that one line near the end....

unable to read DFU status after completion?

for some reason I can't get my H2 to show anything other than a black screen when reattaching it after flashing the HackRF standalone board.

Thank you,
A

[adammanella]

also once I reset the device with the reset button, as per instructions after flashing, the USB led goes away

[straithe]

Great Scott Gadgets is not involved with Portapack H2s. Your best bet for help with this issue would be to check in with the Mayhem GitHub repository.