Infocom 2016 Demo

Testbed Setup

General

Access Points

/ets/hostapd/hostapd.conf

interface=wlan0
driver=nl80211
bridge=bridge

country_code=DE
ieee80211d=1

ssid=BCG2Demo
hw_mode=g
channel=1
wme_enabled=0

# Station MAC address -based authentication
# Please note that this kind of access control requires a driver that uses
# hostapd to take care of management frame processing and as such, this can be
# used with driver=hostap or driver=nl80211, but not with driver=madwifi.
# 0 = accept unless in deny list
# 1 = deny unless in accept list
# 2 = use external RADIUS server (accept/deny lists are searched first)
macaddr_acl=0

# Accept/deny lists are read from separate files (containing list of
# MAC addresses, one per line). Use absolute path name to make sure that the
# files can be read on SIGHUP configuration reloads.
#accept_mac_file=/etc/hostapd/mac.accept
#deny_mac_file=/etc/hostapd/mac.deny

auth_algs=1
wpa=2
wpa_passphrase=gr33ntouch
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP

ctrl_interface=/var/run/hostapd
ctrl_interface_group=0

logger_syslog=-1
logger_syslog_level=1
logger_stdout=-1
logger_stdout_level=1