Does not work under Windows 10 / x64 / IDA 9.0

[r0ptr]

Downloaded the certificate from the website of lumen, and within WSL ran the command:

socat -s -dd tcp4-listen:1234,fork,reuseaddr openssl:lumen.abda.nl:1235,cafile=hexrays.crt

Copied the certificate file to the IDA root installation directory.
Set the environment variables that are mentioned on the homepage to the necessary values. It was unable to connect to the lumen server. Finally, I downloaded the https://github.com/tomrus88/OpenLumina/ plugin to set the server params from IDA Options, after which I am getting the following error:

lumina: connect: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
Command "LuminaPullAllMds" failed

Any ideas what is missing?

[tomrus88]

Plugin won't work with lumen.abda.nl:1235 server due to server using incorrect certificate.

But using socat should work since it ignores certificate errors. Make sure you are using correct server address/port. In IDA settings you must set it to localhost:1234 when using socat with command above.

Alternatively you can create following bat file and use it to run IDA so it works with socat command above:

@echo off
set LUMINA_TLS=false
set LUMINA_PRIMARY=guest:guest@localhost:1234
set LUMINA_PRIMARY_TLS=false
set LUMINA_SECONDARY=guest:guest@localhost:1234
set LUMINA_SECONDARY_TLS=false
ida.exe "-z 00900000"

[Maple38]

@tomrus88 would you mind explaining what the final line of that script is for? I don't really understand why it's there.

Specifically the "-z 00900000"

[tomrus88]

@tomrus88 would you mind explaining what the final line of that script is for? I don't really understand why it's there.

Specifically the "-z 00900000"

Not really required, but it turns on some debug logging that helps to find issues.

https://docs.hex-rays.com/user-guide/configuration/command-line-switches

[bb33bb]

lumina: : Success
Command "LuminaPullAllMds" failed
[autohidden] 2025-02-21 13:53:42 rpc: bad packet length -> OK
lumina: : Success
Command "LuminaPushAllMds" failed

i dont know why

[greenozon]

Command "LuminaPushAllMds" failed
i dont know why

try to debug in IDA?

[a55uka]

I managed to get the socat command working, however whenever I try to connect to the lumina db to pull or push data from it, I get

lumina: lumen:  db error; please try again later..

Command "LuminaPullAllMds" failed

[BakasuraRCE]

@tomrus88 I performed the patch to support IDA 9.1, the debug throws “TLS: Certificated verified”, then proceeds to get metadata but at the end throws the same error:

lumina: lumen:  db error; please try again later..

Command "LuminaPullAllMds" failed

Do you know what could happen?

[tomrus88]

Do you know what could happen?

I think server is down? Try to message naim on twitter/bluesky?

Or you are using it with your own server?

[naim94a]

It’s down because it’s out of disk space. I need to find time to make changes one weekend

…

On Tue, May 6, 2025 at 13:35 TOM_RUS ***@***.***> wrote: *tomrus88* left a comment (naim94a/lumen#176) <#176 (comment)> Do you know what could happen? I think server is down? Try to message naim on twitter/bluesky? Or you are using it with your own server? — Reply to this email directly, view it on GitHub <#176 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AABXQRC65PFL6PWJHC3OCRD25CF5RAVCNFSM6AAAAABUYM4ENGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDQNJUGA3TSMBTGM> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[privacyguy123]

It’s down because it’s out of disk space. I need to find time to make
changes one weekend
…

On Tue, May 6, 2025 at 13:35 TOM_RUS @.***> wrote:
tomrus88 left a comment (naim94a/lumen#176)
<#176 (comment)>

Do you know what could happen?

I think server is down? Try to message naim on twitter/bluesky?

Or you are using it with your own server?

—
Reply to this email directly, view it on GitHub
<#176 (comment)>, or
unsubscribe
https://github.com/notifications/unsubscribe-auth/AABXQRC65PFL6PWJHC3OCRD25CF5RAVCNFSM6AAAAABUYM4ENGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDQNJUGA3TSMBTGM
.
You are receiving this because you are subscribed to this thread.Message
ID: @.***>

Please do!

[BakasuraRCE]

It’s down because it’s out of disk space. I need to find time to make
changes one weekend
…

Thank you for informing us!

[dnetguru]

It’s down because it’s out of disk space. I need to find time to make
changes one weekend
…

Let me know if you need help, I'd be glad to do some of the work.

[privacyguy123]

It’s down because it’s out of disk space. I need to find time to make
changes one weekend
…

Let me know if you need help, I'd be glad to do some of the work.

I'd be happy to help also

[greenozon]

@naim94a the whole Planet is waiting you! :)