[pull] master from torvalds:master#249
Merged
pull[bot] merged 2 commits intoniroshan:masterfrom Oct 26, 2023
Merged
Conversation
If there is no NFIT at startup, it will return 0 immediately in function acpi_nfit_add() and will not install Notify() handler. If hotplugging a nvdimm device later, it will not be identified as there is no Notify() handler. Install the handler before getting NFI table in function acpi_nfit_add() to avoid above issue. Fixes: dcca12a ("ACPI: NFIT: Install Notify() handler directly") Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
…/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Unbreak the ACPI NFIT driver after a recent change that inadvertently altered its behavior (Xiang Chen)" * tag 'acpi-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: NFIT: Install Notify() handler before getting NFIT table
pull bot
pushed a commit
that referenced
this pull request
Apr 27, 2024
When e.g. 8 bytes are to be read, sgm->consumed equals 8 immediately after sg_miter_next() call. The driver then increments it as bytes are read, so sgm->consumed becomes 16 and this warning triggers in sg_miter_stop(): WARN_ON(miter->consumed > miter->length); WARNING: CPU: 0 PID: 28 at lib/scatterlist.c:925 sg_miter_stop+0x2c/0x10c CPU: 0 PID: 28 Comm: kworker/0:2 Tainted: G W 6.9.0-rc5-dirty #249 Hardware name: Generic DT based system Workqueue: events_freezable mmc_rescan Call trace:. unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x44/0x5c dump_stack_lvl from __warn+0x78/0x16c __warn from warn_slowpath_fmt+0xb0/0x160 warn_slowpath_fmt from sg_miter_stop+0x2c/0x10c sg_miter_stop from moxart_request+0xb0/0x468 moxart_request from mmc_start_request+0x94/0xa8 mmc_start_request from mmc_wait_for_req+0x60/0xa8 mmc_wait_for_req from mmc_app_send_scr+0xf8/0x150 mmc_app_send_scr from mmc_sd_setup_card+0x1c/0x420 mmc_sd_setup_card from mmc_sd_init_card+0x12c/0x4dc mmc_sd_init_card from mmc_attach_sd+0xf0/0x16c mmc_attach_sd from mmc_rescan+0x1e0/0x298 mmc_rescan from process_scheduled_works+0x2e4/0x4ec process_scheduled_works from worker_thread+0x1ec/0x24c worker_thread from kthread+0xd4/0xe0 kthread from ret_from_fork+0x14/0x38 This patch adds initial zeroing of sgm->consumed. It is then incremented as bytes are read or written. Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Fixes: 3ee0e7c ("mmc: moxart-mmc: Use sg_miter for PIO") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240422153607.963672-1-saproj@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
pull bot
pushed a commit
that referenced
this pull request
Jun 23, 2025
[BUG] There is syzbot based reproducer that can crash the kernel, with the following call trace: (With some debug output added) DEBUG: rescue=ibadroots parsed BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010) BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8 BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm BTRFS info (device loop0): using free-space-tree BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0 DEBUG: read tree root path failed for tree csum, ret=-5 BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0 BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0 process 'repro' launched './file2' with NULL argv: empty string added DEBUG: no csum root, idatacsums=0 ibadroots=134217728 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs] Call Trace: <TASK> btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs] btrfs_submit_bbio+0x43e/0x1a80 [btrfs] submit_one_bio+0xde/0x160 [btrfs] btrfs_readahead+0x498/0x6a0 [btrfs] read_pages+0x1c3/0xb20 page_cache_ra_order+0x4b5/0xc20 filemap_get_pages+0x2d3/0x19e0 filemap_read+0x314/0xde0 __kernel_read+0x35b/0x900 bprm_execve+0x62e/0x1140 do_execveat_common.isra.0+0x3fc/0x520 __x64_sys_execveat+0xdc/0x130 do_syscall_64+0x54/0x1d0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ---[ end trace 0000000000000000 ]--- [CAUSE] Firstly the fs has a corrupted csum tree root, thus to mount the fs we have to go "ro,rescue=ibadroots" mount option. Normally with that mount option, a bad csum tree root should set BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will ignore csum search. But in this particular case, we have the following call trace that caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS: load_global_roots_objectid(): ret = btrfs_search_slot(); /* Succeeded */ btrfs_item_key_to_cpu() found = true; /* We found the root item for csum tree. */ root = read_tree_root_path(); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) /* * Since we have rescue=ibadroots mount option, * @ret is still 0. */ break; if (!found || ret) { /* @found is true, @ret is 0, error handling for csum * tree is skipped. */ } This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if the csum tree is corrupted, which results unexpected later csum lookup. [FIX] If read_tree_root_path() failed, always populate @ret to the error number. As at the end of the function, we need @ret to determine if we need to do the extra error handling for csum tree. Fixes: abed4aa ("btrfs: track the csum, extent, and free space trees in a rb tree") Reported-by: Zhiyu Zhang <zhiyuzhang999@gmail.com> Reported-by: Longxing Li <coregee2000@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]
Can you help keep this open source service alive? 💖 Please sponsor : )