tests: drivers: can: api: Bring in new tests

tests/drivers/can/api/src/canfd.c

@@ -238,6 +238,45 @@ ZTEST(canfd, test_canfd_get_capabilities)
 			  "CAN FD loopback mode not supported");
 }
 
+/**
+ * @brief Test sending CAN FD frame with too big payload.
+ */
+ZTEST(canfd, test_send_fd_dlc_out_of_range)
+{
+	struct can_frame frame = {
+		.flags = CAN_FRAME_FDF | CAN_FRAME_BRS,
+		.id = TEST_CAN_STD_ID_1,
+		.dlc = CANFD_MAX_DLC + 1U,
+	};
+	int err;
+
+	Z_TEST_SKIP_IFNDEF(CONFIG_RUNTIME_ERROR_CHECKS);
+
+	err = can_send(can_dev, &frame, TEST_SEND_TIMEOUT, NULL, NULL);
+	zassert_equal(err, -EINVAL, "wrong error on sending invalid frame (err %d)", err);
+}
+
+/**
+ * @brief Test error when CAN FD Error State Indicator (ESI) is send without FD format flag (FDF).
+ *
+ * CAN FD Error State Indicator (ESI) indicates that the transmitting node is
+ * in error-passive state. Only valid in combination with CAN_FRAME_FDF.
+ */
+ZTEST(canfd, test_send_fd_incorrect_esi)
+{
+	struct can_frame frame = {
+		.flags = CAN_FRAME_ESI,
+		.id = TEST_CAN_STD_ID_1,
+		.dlc = 0,
+	};
+	int err;
+
+	Z_TEST_SKIP_IFNDEF(CONFIG_RUNTIME_ERROR_CHECKS);
+
+	err = can_send(can_dev, &frame, TEST_SEND_TIMEOUT, NULL, NULL);
+	zassert_equal(err, -ENOTSUP, "wrong error on sending invalid frame (err %d)", err);
+}
+
 /**
  * @brief Test send/receive with standard (11-bit) CAN IDs and classic CAN frames.
  */
@@ -395,6 +434,31 @@ ZTEST_USER(canfd, test_set_timing_data_min)
 	zassert_equal(err, 0, "failed to start CAN controller (err %d)", err);
 }
 
+/**
+ * @brief Test setting a too low data phase bitrate.
+ */
+ZTEST_USER(canfd, test_set_bitrate_data_too_low)
+{
+	uint32_t min = can_get_bitrate_min(can_dev);
+	int err;
+
+	if (min == 0) {
+		ztest_test_skip();
+	}
+
+	err = can_stop(can_dev);
+	zassert_equal(err, 0, "failed to stop CAN controller (err %d)", err);
+
+	err = can_set_bitrate_data(can_dev, min - 1);
+	zassert_equal(err, -ENOTSUP, "too low data phase bitrate accepted");
+
+	err = can_set_bitrate_data(can_dev, CONFIG_CAN_DEFAULT_BITRATE_DATA);
+	zassert_equal(err, 0, "failed to restore default data bitrate");
+
+	err = can_start(can_dev);
+	zassert_equal(err, 0, "failed to start CAN controller (err %d)", err);
+}
+
 /**
  * @brief Test setting a too high data phase bitrate.
  */

tests/drivers/can/api/src/classic.c

@@ -486,6 +486,31 @@ ZTEST_USER(can_classic, test_bitrate_limits)
 	zassert_true(min <= max, "min bitrate must be lower or equal to max bitrate");
 }
 
+/**
+ * @brief Test setting a too low bitrate.
+ */
+ZTEST_USER(can_classic, test_set_bitrate_too_low)
+{
+	uint32_t min = can_get_bitrate_min(can_dev);
+	int err;
+
+	if (min == 0) {
+		ztest_test_skip();
+	}
+
+	err = can_stop(can_dev);
+	zassert_equal(err, 0, "failed to stop CAN controller (err %d)", err);
+
+	err = can_set_bitrate(can_dev, min - 1);
+	zassert_equal(err, -ENOTSUP, "too low bitrate accepted");
+
+	err = can_set_bitrate(can_dev, CONFIG_CAN_DEFAULT_BITRATE);
+	zassert_equal(err, 0, "failed to restore default bitrate");
+
+	err = can_start(can_dev);
+	zassert_equal(err, 0, "failed to start CAN controller (err %d)", err);
+}
+
 /**
  * @brief Test setting a too high bitrate.
  */
@@ -615,6 +640,19 @@ ZTEST(can_classic, test_add_filter)
 	can_remove_rx_filter(can_dev, filter_id);
 }
 
+/**
+ * @brief Test adding filter without callback.
+ */
+ZTEST(can_classic, test_add_filter_without_callback)
+{
+	int err;
+
+	Z_TEST_SKIP_IFNDEF(CONFIG_RUNTIME_ERROR_CHECKS);
+
+	err = can_add_rx_filter(can_dev, NULL, NULL, &test_std_filter_1);
+	zassert_equal(err, -EINVAL, "added filter with NULL callback");
+}
+
 /**
  * @brief Test adding an invalid CAN RX filter.
  *
@@ -818,6 +856,33 @@ ZTEST(can_classic, test_send_ext_id_out_of_range)
 	send_invalid_frame(can_dev, &frame);
 }
 
+/**
+ * @brief Test sending standard (11-bit ID) CAN frame with too big payload.
+ */
+ZTEST(can_classic, test_send_std_id_dlc_of_range)
+{
+	struct can_frame frame = {
+		.id = TEST_CAN_STD_ID_1,
+		.dlc = CAN_MAX_DLC + 1U,
+	};
+
+	send_invalid_frame(can_dev, &frame);
+}
+
+/**
+ * @brief Test sending extended (29-bit ID) CAN frame with too big payload.
+ */
+ZTEST(can_classic, test_send_ext_id_dlc_of_range)
+{
+	struct can_frame frame = {
+		.flags = CAN_FRAME_IDE,
+		.id = TEST_CAN_EXT_ID_1,
+		.dlc = CAN_MAX_DLC + 1U,
+	};
+
+	send_invalid_frame(can_dev, &frame);
+}
+
 /**
  * @brief Test send/receive with standard (11-bit) CAN IDs.
  */