Repository navigation
control_traffic_qos_test
Github Action edited this page Nov 12, 2026
·
1 revision
- Validate that DUT-originated IPv4 and IPv6 control and management plane
traffic (NTP, TACACS+, SSH, DNS client, sFlow, Syslog, P4RT, gRIBI, gNMI,
and gNOI) egresses in forwarding class
AF4withDSCP 32(and neverBE1/DSCP 0) both when routed over Linecard (LC) interfaces via eBGP in the management VRF (mgmt) and when failing over to the Out-of-Band (OOB) management fallback interface via a backup static default route.
+-----------------------------------+ +----------------------------------+
| DUT (AS 64512) | | ATE (AS 64511) |
| | | |
| [VRF: mgmt] | | Mgmt Collectors / Servers: |
| <DUT_LO1> (lo1) | | 198.51.100.1 / 2001:db8:100::1 |
| 192.0.2.101/32, 2001:db8::101/128| | (BE1 Congestion Source/Sink) |
| | | |
| <DUT_PORT1> (LC1, QoS AF4/BE1) | eBGP | <ATE_PORT1> |
| 192.0.2.1/30, 2001:db8::1/126 ---+-------+-- 192.0.2.2/30, 2001:db8::2/126 |
| | | |
| <DUT_PORT2> (LC2, QoS AF4/BE1) | eBGP | <ATE_PORT2> |
| 192.0.2.5/30, 2001:db8::5/126 ---+-------+-- 192.0.2.6/30, 2001:db8::6/126 |
| | | |
| <DUT_PORT3> (OOB, QoS AF4/BE1) |Static | <ATE_PORT3> |
| 192.0.2.9/30, 2001:db8::9/126 ---+-(220)-+-- 192.0.2.10/30, 2001:db8::a/126 |
| .................................| | ................................|
| [VRF: DEFAULT] | | Data-Plane Transit / Isolation: |
| <DUT_PORT4> (sFlow Ingress) |Transit| <ATE_PORT4> |
| 192.0.2.13/30, 2001:db8::d/126 --+-------+-- 192.0.2.14/30, 2001:db8::e/126 |
+-----------------------------------+ +----------------------------------+
For each section of configuration below, prepare a gnmi.SetBatch with all the
configuration items appended to one SetBatch. Then apply the configuration to
the DUT in one gnmi.Set using the replace option.
- Connect
<DUT_PORT1>,<DUT_PORT2>,<DUT_PORT3>, and<DUT_PORT4>to<ATE_PORT1>,<ATE_PORT2>,<ATE_PORT3>, and<ATE_PORT4>:-
<DUT_PORT1>(port1,192.0.2.1/30,2001:db8::1/126) <-><ATE_PORT1>(port1,192.0.2.2/30,2001:db8::2/126): In-band Linecard (LC) management link 1 (mgmtVRF). -
<DUT_PORT2>(port2,192.0.2.5/30,2001:db8::5/126) <-><ATE_PORT2>(port2,192.0.2.6/30,2001:db8::6/126): In-band Linecard (LC) management link 2 (mgmtVRF). -
<DUT_PORT3>(port3,192.0.2.9/30,2001:db8::9/126) <-><ATE_PORT3>(port3,192.0.2.10/30,2001:db8::a/126): Out-of-Band (OOB) management fallback link (mgmtVRF). -
<DUT_PORT4>(port4,192.0.2.13/30,2001:db8::d/126) <-><ATE_PORT4>(port4,192.0.2.14/30,2001:db8::e/126): Data-plane transit link (DEFAULTVRF).
-
- Create VRF
"mgmt"on DUT:/network-instances/network-instance[name=mgmt]/config/name = mgmt/network-instances/network-instance[name=mgmt]/config/type = L3VRF
- Create simulated management collector/server networks (
198.51.100.1/32and2001:db8:100::1/128) attached behind<ATE_PORT1>,<ATE_PORT2>, and<ATE_PORT3>. - Create a loopback interface
<DUT_LO1>(lo1) on DUT and assign IPv4 (192.0.2.101/32) and IPv6 (2001:db8::101/128) addresses:/interfaces/interface[name=lo1]/config/name = lo1/interfaces/interface[name=lo1]/config/type = softwareLoopback/interfaces/interface[name=lo1]/subinterfaces/subinterface[index=0]/ipv4/addresses/address/config/ip = 192.0.2.101/interfaces/interface[name=lo1]/subinterfaces/subinterface[index=0]/ipv4/addresses/address/config/prefix-length = 32/interfaces/interface[name=lo1]/subinterfaces/subinterface[index=0]/ipv6/addresses/address/config/ip = 2001:db8::101/interfaces/interface[name=lo1]/subinterfaces/subinterface[index=0]/ipv6/addresses/address/config/prefix-length = 128
- Configure
<DUT_LO1>to participate in VRF"mgmt":/network-instances/network-instance[name=mgmt]/interfaces/interface[id=lo1]/config/interface = lo1
- Configure IPv4 and IPv6 addresses on
<DUT_PORT1>and<DUT_PORT2>and bind them to VRF"mgmt":/interfaces/interface/subinterfaces/subinterface/ipv4/addresses/address/config/ip/interfaces/interface/subinterfaces/subinterface/ipv4/addresses/address/config/prefix-length/interfaces/interface/subinterfaces/subinterface/ipv6/addresses/address/config/ip/interfaces/interface/subinterfaces/subinterface/ipv6/addresses/address/config/prefix-length/network-instances/network-instance[name=mgmt]/interfaces/interface/config/interface
- Configure dual-stack eBGP between
<DUT_PORT1><--><ATE_PORT1>and<DUT_PORT2><--><ATE_PORT2>in VRF"mgmt"(<DUT_AS> = 64512,<ATE_AS> = 64511):/network-instances/network-instance[name=mgmt]/protocols/protocol[identifier=BGP, name=BGP]/bgp/global/config/as = 64512/network-instances/network-instance[name=mgmt]/protocols/protocol[identifier=BGP, name=BGP]/bgp/global/config/router-id = 192.0.2.101/network-instances/network-instance[name=mgmt]/protocols/protocol[identifier=BGP, name=BGP]/bgp/neighbors/neighbor/config/neighbor-address/network-instances/network-instance[name=mgmt]/protocols/protocol[identifier=BGP, name=BGP]/bgp/neighbors/neighbor/config/peer-as = 64511
- Advertise default routes (
0.0.0.0/0,::/0) and management server prefixes (198.51.100.0/24,2001:db8:100::/64) from ATE to DUT through both eBGP sessions. - Redistribute
<DUT_LO1>(192.0.2.101/32and2001:db8::101/128) from DUT to ATE through both eBGP sessions:- Configure
table-connectionsfromDIRECTLY_CONNECTEDtoBGPforIPV4andIPV6withdefault-import-policy = REJECT_ROUTEanddisable-metric-propagation = false:/network-instances/network-instance/table-connections/table-connection/config/address-family/network-instances/network-instance/table-connections/table-connection/config/src-protocol/network-instances/network-instance/table-connections/table-connection/config/dst-protocol/network-instances/network-instance/table-connections/table-connection/config/default-import-policy/network-instances/network-instance/table-connections/table-connection/config/disable-metric-propagation/network-instances/network-instance/table-connections/table-connection/config/import-policy
- Configure prefix-sets
lo1_v4_prefix_set(IPV4,192.0.2.101/32,exact) andlo1_v6_prefix_set(IPV6,2001:db8::101/128,exact):/routing-policy/defined-sets/prefix-sets/prefix-set/config/name/routing-policy/defined-sets/prefix-sets/prefix-set/config/mode/routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/ip-prefix/routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/masklength-range
- Configure policy-definitions
redist_lo1_v4(allow_lo1_v4) andredist_lo1_v6(allow_lo1_v6) matching the prefix-sets withmatch-set-options = ANYandpolicy-result = ACCEPT_ROUTE:/routing-policy/policy-definitions/policy-definition/config/name/routing-policy/policy-definitions/policy-definition/statements/statement/config/name/routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/match-set-options/routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/prefix-set/routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result
- Configure
- Configure IPv4 and IPv6 addresses on
<DUT_PORT3>and<ATE_PORT3>and bind<DUT_PORT3>to VRF"mgmt":/interfaces/interface/subinterfaces/subinterface/ipv4/addresses/address/config/ip/interfaces/interface/subinterfaces/subinterface/ipv4/addresses/address/config/prefix-length/interfaces/interface/subinterfaces/subinterface/ipv6/addresses/address/config/ip/interfaces/interface/subinterfaces/subinterface/ipv6/addresses/address/config/prefix-length/network-instances/network-instance[name=mgmt]/interfaces/interface/config/interface
- Configure backup IPv4 (
0.0.0.0/0->192.0.2.10) and IPv6 (::/0->2001:db8::a) static default routes on DUT in VRF"mgmt"with administrativepreference = 220:/network-instances/network-instance[name=mgmt]/protocols/protocol[identifier=STATIC, name=STATIC]/static-routes/static/config/prefix/network-instances/network-instance[name=mgmt]/protocols/protocol[identifier=STATIC, name=STATIC]/static-routes/static/next-hops/next-hop/config/index = 1/network-instances/network-instance[name=mgmt]/protocols/protocol[identifier=STATIC, name=STATIC]/static-routes/static/next-hops/next-hop[index=1]/config/next-hop/network-instances/network-instance[name=mgmt]/protocols/protocol[identifier=STATIC, name=STATIC]/static-routes/static/next-hops/next-hop/config/preference = 220
- Configure queues
AF4andBE1, forwarding-groupsAF4 -> AF4andBE1 -> BE1, IPv4/IPv6 classifiersdscp_af4_v4anddscp_af4_v6(dscp-set = [32] -> AF4,dscp-set = [0] -> BE1soMGT-2.3transit traffic is classified intoBE1), binddscp_af4_v4anddscp_af4_v6under/qos/interfaces/interface/input/classifierson<DUT_PORT1>,<DUT_PORT2>, and<DUT_PORT3>, and attach egress strict priority scheduler-policymgmt_qos_sched(AF4STRICTpriority overBE1) under/qos/interfaces/interface/outputon<DUT_PORT1>,<DUT_PORT2>, and<DUT_PORT3>:/qos/queues/queue/config/name/qos/forwarding-groups/forwarding-group/config/name/qos/forwarding-groups/forwarding-group/config/output-queue/qos/classifiers/classifier/config/name/qos/classifiers/classifier/config/type/qos/classifiers/classifier/terms/term/config/id/qos/classifiers/classifier/terms/term/conditions/ipv4/config/dscp-set/qos/classifiers/classifier/terms/term/conditions/ipv6/config/dscp-set/qos/classifiers/classifier/terms/term/actions/config/target-group/qos/scheduler-policies/scheduler-policy/config/name/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/config/sequence/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/config/priority/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/config/type/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/config/id/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/config/input-type/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/config/queue/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/config/weight/qos/interfaces/interface/config/interface-id/qos/interfaces/interface/input/classifiers/classifier/config/name/qos/interfaces/interface/input/classifiers/classifier/config/type/qos/interfaces/interface/output/queues/queue/config/name/qos/interfaces/interface/output/scheduler-policy/config/name
All subtests (MGT-2.1–MGT-2.7) reference the following 10 control and
management protocols (sourced from <DUT_LO1> 192.0.2.101 / 2001:db8::101
in VRF mgmt toward 198.51.100.1 / 2001:db8:100::1) and verification
criteria:
-
10-Protocol Trigger Suite (IPv4 & IPv6):
-
NTP (UDP
123): Enable/system/ntp/config/enabled = truewith servers198.51.100.1(source-address = 192.0.2.101) and2001:db8:100::1(source-address = 2001:db8::101) innetwork-instance = mgmt, and trigger an NTP poll/re-sync viagNMI.Setso the DUT transmits outbound UDP123client requests. -
TACACS+ (TCP
49): Enable AAATACACS_ALLwith server-groupTACACS-MGMT(198.51.100.1:49withsource-address = 192.0.2.101and2001:db8:100::1:49withsource-address = 2001:db8::101in VRFmgmt). Because a stateless OTG TCPSYNto port22does not reach the SSH user-authentication phase, trigger TACACS+ by invoking an authenticated management RPC/CLI action or AAA authentication/accounting event on the DUT so the AAA daemon initiates outbound TCP49SYNpackets from<DUT_LO1>in VRFmgmt. -
DNS Client (UDP/TCP
53): Configure DNS servers198.51.100.1and2001:db8:100::1under/system/dns/servers/server/config. Because OpenConfig/system/dns/servers/server/configonly definesaddressandport(withoutnetwork-instanceorsource-addressleaves), ensure198.51.100.0/24and2001:db8:100::/64are reachable in VRFmgmt(binding the DNS resolver to VRFmgmtand source<DUT_LO1>) and invokegNOI.System.Pingto unresolved hostnamemgmt-target.example.comin VRFmgmtsourced from<DUT_LO1>to trigger outbound DNS queries. -
sFlow (UDP
6343): Enable/sampling/sflow/config/enabled = true(dscp = 32, rate1, size256) on<DUT_PORT4>with collectors198.51.100.1(source-address = 192.0.2.101) and2001:db8:100::1(source-address = 2001:db8::101) innetwork-instance = mgmt, and send transit traffic from<ATE_PORT4>to<DUT_PORT4>to trigger outbound sFlow datagrams. -
Syslog (UDP
514): Configure remote servers198.51.100.1(source-address = 192.0.2.101) and2001:db8:100::1(source-address = 2001:db8::101) (ALL/INFORMATIONAL) innetwork-instance = mgmtand trigger a configuration update viagNMI.Setto emit outbound UDP514syslog messages. -
SSH (
22), gNMI/gNOI (9339), gRIBI (9340), and P4RT (9559) — In-Band OTG TCPSYNProbes & Listeners:- Because
dut.RawAPIs()executes over the lab's out-of-band management network (not in-band VRFmgmt) and OTG generates stateless packets, enable/system/ssh-server/config/enable = trueand configure/system/grpc-servers/grpc-serverlisteners on<DUT_LO1>(192.0.2.101,2001:db8::101) innetwork-instance = mgmtfor ports9339(GNMIandGNOI, which share TCP port9339),9340(GRIBI), and9559(P4RT) so the DUT does not reply withDSCP 0TCPRSTpackets. - Send in-band OTG TCP
SYNprobes from198.51.100.1and2001:db8:100::1to<DUT_LO1>(192.0.2.101/2001:db8::101) on destination ports22(SSH),9339(gNMI/gNOI),9340(gRIBI), and9559(P4RT) (alongsidegNMI.Get/Subscribe,gNOI.System.Time/Ping,gRIBI.Get/Modify, andP4Runtime.StreamChannelRPC triggers) and verify the DUT's egress TCPSYN-ACKresponses carry DSCP =32(AF4).
- Because
-
NTP (UDP
-
Standard Egress AF4 Verification:
- Validate via packet capture on the active ATE port(s) that
> 0packets (packet-count >= 1) are captured per protocol, that 100% of captured DUT-originated IPv4 and IPv6 packets across all 10 protocols carry DSCP =32(AF4, byte0x80), and that 0 packets carryDSCP 0(BE1) or any other DSCP value. - Validate via
/qos/interfaces/interface/output/queues/queue/stateon the active DUT egress port(s) thatAF4transmit-pktsandtransmit-octetsincrement (delta > 0) whileAF4dropped-pktsremains0.
- Validate via packet capture on the active ATE port(s) that
- Verify VRF
mgmtIPv4 and IPv6 eBGP sessions on<DUT_PORT1>and<DUT_PORT2>areESTABLISHEDand record baselineAF4queue counters. - Start packet capture on
<ATE_PORT1>and<ATE_PORT2>, run the 10-Protocol Trigger Suite, then stop packet capture. - Validate the Standard Egress AF4 Verification on
<DUT_PORT1>/<ATE_PORT1>and<DUT_PORT2>/<ATE_PORT2>.
- Record baseline
AF4queue counters on<DUT_PORT3>, disable<DUT_PORT1>and<DUT_PORT2>, and verify VRFmgmteBGP leavesESTABLISHEDand switches to the backup static default routes (preference = 220) over<DUT_PORT3>. - Start packet capture on
<ATE_PORT3>, run the 10-Protocol Trigger Suite, stop packet capture, and validate the Standard Egress AF4 Verification on<DUT_PORT3>/<ATE_PORT3>. - Bring up
<DUT_PORT1>and<DUT_PORT2>, verify eBGP returns toESTABLISHED, and validate traffic fails back to<DUT_PORT1>/<DUT_PORT2>with DSCP =32(AF4).
- Record baseline
AF4andBE1queue counters on<DUT_PORT1>and<DUT_PORT2>. - Start continuous oversubscribed background
BE1(DSCP 0) IPv4 and IPv6 congestion flows in VRFmgmtto induce continuousBE1tail-drops on both<DUT_PORT1>and<DUT_PORT2>:-
Traffic Rate & Oversubscription Ratio: Inject
60%line-rateBE1(DSCP 0) traffic from<ATE_PORT2>plus48%–60%line-rate from<ATE_PORT3>toward<ATE_PORT1>(108%–120%total egress load on<DUT_PORT1>), and symmetrically60%line-rate from<ATE_PORT1>plus48%–60%line-rate from<ATE_PORT3>toward<ATE_PORT2>(108%–120%total egress load on<DUT_PORT2>, keeping<ATE_PORT3>aggregate ingress TX<= 100%line rate). -
Destination Addressing (Single-Port Pinning vs. ECMP): Address the
<DUT_PORT1>congestion flows directly to<ATE_PORT1>'s connected interface IPs (192.0.2.2/2001:db8::2) and the<DUT_PORT2>congestion flows directly to<ATE_PORT2>'s connected interface IPs (192.0.2.6/2001:db8::6) so each flow is deterministically routed to its intended single egress port rather than ECMP-hashed across both.
-
Traffic Rate & Oversubscription Ratio: Inject
-
Concurrent Execution: While the background
BE1(DSCP 0) congestion flows remain continuously transmitting across<DUT_PORT1>and<DUT_PORT2>, capture on<ATE_PORT1>and<ATE_PORT2>and execute the 10-Protocol Trigger Suite; stop the backgroundBE1congestion flows and packet captures only after all protocol triggers complete. - Validate
BE1dropped-pkts > 0on both<DUT_PORT1>and<DUT_PORT2>, and validate the Standard Egress AF4 Verification passes with 0% packet loss (AF4dropped-pkts == 0).
- Record baseline
AF4andBE1counters on<DUT_PORT1>–<DUT_PORT3>. - Start packet capture on
<ATE_PORT1>and<ATE_PORT2>while the ATE sends inbound TCPSYNpackets marked withDSCP 0(BE1) andDSCP 8(CS1) from198.51.100.1and2001:db8:100::1to<DUT_LO1>(192.0.2.101/2001:db8::101) on the listening management TCP ports (22forSSH,9339forgNMI/gNOI,9340forgRIBI, and9559forP4RT), then stop capture. - Disable
<DUT_PORT1>and<DUT_PORT2>, repeat the inboundDSCP 0(BE1) andDSCP 8(CS1) TCPSYNpackets to<DUT_LO1>(192.0.2.101/2001:db8::101) on ports22,9339,9340, and9559over OOB<ATE_PORT3>, then stop capture. - Validate that all DUT egress TCP
SYN-ACK(and RPC) response packets on<ATE_PORT1>–<ATE_PORT3>always carry DSCP =32(AF4) (never reflecting the client'sDSCP 0orDSCP 8), then bring up<DUT_PORT1>and<DUT_PORT2>and verify eBGP returns toESTABLISHED.
- Verify baseline traffic across
<DUT_PORT1>and<DUT_PORT2>, then disable only<DUT_PORT1>while keeping<DUT_PORT2>ESTABLISHED. - Start fresh packet captures on
<ATE_PORT2>and<ATE_PORT3>, run the 10-Protocol Trigger Suite, stop captures, and validate that 0 management packets fail over to OOB<ATE_PORT3>while all rehashed flows egress<DUT_PORT2>meeting the Standard Egress AF4 Verification (DSCP =32/AF4). - Flap
<DUT_PORT1>and<DUT_PORT2>5 times (forcing repeated LC <-> OOB transitions) while deleting and re-creating the NTP and Syslog servers viagNMI.Set. - Ensure
<DUT_PORT1>and<DUT_PORT2>are enabled with eBGPESTABLISHED, start fresh packet captures on<ATE_PORT1>–<ATE_PORT3>, run the 10-Protocol Trigger Suite, stop captures, and validate all 10 protocols retain DSCP =32(AF4) throughout.
- Set
/sampling/sflow/config/dscp = 0(BE1) viagNMI.Set, start packet capture on<ATE_PORT1>and<ATE_PORT2>, run the 10-Protocol Trigger Suite, and stop capture. - Validate deterministically that exported
sFlow(UDP 6343) packets egress with DSCP =0(BE1) and increment only queueBE1(transmit-pktsdelta> 0, and not queueAF4), while the 9 remaining protocols continue to egress with DSCP =32(AF4) and increment queueAF4meeting the Standard Egress AF4 Verification. - Restore
/sampling/sflow/config/dscp = 32viagNMI.Setand validate/sampling/sflow/state/dscp == 32.
- Configure temporary default routes (
0.0.0.0/0via192.0.2.14,::/0via2001:db8::e) in theDEFAULTVRF over<DUT_PORT4>. - Disable
<DUT_PORT1>,<DUT_PORT2>, and<DUT_PORT3>, start packet capture on<ATE_PORT1>–<ATE_PORT4>, and trigger the 10-Protocol Trigger Suite. - Validate negatively on
<ATE_PORT4>that 0 VRFmgmtpackets leak into theDEFAULTVRF. - Bring up
<DUT_PORT3>then<DUT_PORT1>and<DUT_PORT2>, stop captures, validate recovery on<DUT_PORT3>and failback to<DUT_PORT1>/<DUT_PORT2>meet the Standard Egress AF4 Verification, and remove the temporaryDEFAULTVRF default routes.
-
ATE Cleanup: Stop all active OTG traffic flows, packet captures, and
protocol sessions on
<ATE_PORT1>–<ATE_PORT4>. -
Interface & Subtest State Restoration: Ensure
<DUT_PORT1>–<DUT_PORT4>are enabled (/interfaces/interface/config/enabled = true) with/interfaces/interface/state/oper-status = UP, remove any temporaryDEFAULTVRF static default routes configured on<DUT_PORT4>duringMGT-2.7, and ensure/sampling/sflow/config/dscpis restored to32if modified duringMGT-2.6. -
DUT Configuration Teardown: Remove the 10-protocol management
configurations (NTP servers, AAA
TACACS-MGMTserver-group and authentication method, DNS servers, sFlow collectors and<DUT_PORT4>sampling interface, remote Syslog servers, and gRPC serversmgmt-grpc,mgmt-gribi, andmgmt-p4rt), QoS configuration (mgmt_qos_schedscheduler-policy,dscp_af4_v4anddscp_af4_v6classifiers, andAF4/BE1forwarding-groups and queues on<DUT_PORT1>–<DUT_PORT3>), VRFmgmtrouting configuration (eBGP neighbors, backup static default routes,table-connections, androuting-policyprefix-sets and policy-definitions), and VRFmgmt/ interface IP configurations on<DUT_PORT1>–<DUT_PORT4>and<DUT_LO1>to restore the DUT to its pre-test baseline state.
{
"interfaces": {
"interface": [
{
"name": "lo1",
"config": {"enabled": true, "name": "lo1", "type": "iana-if-type:softwareLoopback"},
"subinterfaces": {
"subinterface": [
{
"index": 0,
"config": {"index": 0},
"ipv4": {"addresses": {"address": [{"ip": "192.0.2.101", "config": {"ip": "192.0.2.101", "prefix-length": 32}}]}},
"ipv6": {"addresses": {"address": [{"ip": "2001:db8::101", "config": {"ip": "2001:db8::101", "prefix-length": 128}}]}}
}
]
}
},
{
"name": "port1",
"config": {"enabled": true, "name": "port1", "type": "iana-if-type:ethernetCsmacd"},
"subinterfaces": {
"subinterface": [
{
"index": 0,
"config": {"index": 0},
"ipv4": {"addresses": {"address": [{"ip": "192.0.2.1", "config": {"ip": "192.0.2.1", "prefix-length": 30}}]}},
"ipv6": {"addresses": {"address": [{"ip": "2001:db8::1", "config": {"ip": "2001:db8::1", "prefix-length": 126}}]}}
}
]
}
},
{
"name": "port2",
"config": {"enabled": true, "name": "port2", "type": "iana-if-type:ethernetCsmacd"},
"subinterfaces": {
"subinterface": [
{
"index": 0,
"config": {"index": 0},
"ipv4": {"addresses": {"address": [{"ip": "192.0.2.5", "config": {"ip": "192.0.2.5", "prefix-length": 30}}]}},
"ipv6": {"addresses": {"address": [{"ip": "2001:db8::5", "config": {"ip": "2001:db8::5", "prefix-length": 126}}]}}
}
]
}
},
{
"name": "port3",
"config": {"enabled": true, "name": "port3", "type": "iana-if-type:ethernetCsmacd"},
"subinterfaces": {
"subinterface": [
{
"index": 0,
"config": {"index": 0},
"ipv4": {"addresses": {"address": [{"ip": "192.0.2.9", "config": {"ip": "192.0.2.9", "prefix-length": 30}}]}},
"ipv6": {"addresses": {"address": [{"ip": "2001:db8::9", "config": {"ip": "2001:db8::9", "prefix-length": 126}}]}}
}
]
}
},
{
"name": "port4",
"config": {"enabled": true, "name": "port4", "type": "iana-if-type:ethernetCsmacd"},
"subinterfaces": {
"subinterface": [
{
"index": 0,
"config": {"index": 0},
"ipv4": {"addresses": {"address": [{"ip": "192.0.2.13", "config": {"ip": "192.0.2.13", "prefix-length": 30}}]}},
"ipv6": {"addresses": {"address": [{"ip": "2001:db8::d", "config": {"ip": "2001:db8::d", "prefix-length": 126}}]}}
}
]
}
}
]
},
"network-instances": {
"network-instance": [
{
"name": "mgmt",
"config": {"name": "mgmt", "type": "openconfig-network-instance-types:L3VRF"},
"interfaces": {
"interface": [
{"id": "lo1", "config": {"id": "lo1", "interface": "lo1"}},
{"id": "port1", "config": {"id": "port1", "interface": "port1"}},
{"id": "port2", "config": {"id": "port2", "interface": "port2"}},
{"id": "port3", "config": {"id": "port3", "interface": "port3"}}
]
},
"protocols": {
"protocol": [
{
"identifier": "openconfig-policy-types:BGP",
"name": "BGP",
"config": {"identifier": "openconfig-policy-types:BGP", "name": "BGP"},
"bgp": {
"global": {"config": {"as": 64512, "router-id": "192.0.2.101"}},
"neighbors": {
"neighbor": [
{"neighbor-address": "192.0.2.2", "config": {"neighbor-address": "192.0.2.2", "peer-as": 64511}},
{"neighbor-address": "192.0.2.6", "config": {"neighbor-address": "192.0.2.6", "peer-as": 64511}},
{"neighbor-address": "2001:db8::2", "config": {"neighbor-address": "2001:db8::2", "peer-as": 64511}},
{"neighbor-address": "2001:db8::6", "config": {"neighbor-address": "2001:db8::6", "peer-as": 64511}}
]
}
}
},
{
"identifier": "openconfig-policy-types:DIRECTLY_CONNECTED",
"name": "DIRECTLY_CONNECTED",
"config": {"identifier": "openconfig-policy-types:DIRECTLY_CONNECTED", "name": "DIRECTLY_CONNECTED"}
},
{
"identifier": "openconfig-policy-types:STATIC",
"name": "STATIC",
"config": {"identifier": "openconfig-policy-types:STATIC", "name": "STATIC"},
"static-routes": {
"static": [
{
"prefix": "0.0.0.0/0",
"config": {"prefix": "0.0.0.0/0"},
"next-hops": {"next-hop": [{"index": "1", "config": {"index": "1", "next-hop": "192.0.2.10", "preference": 220}}]}
},
{
"prefix": "::/0",
"config": {"prefix": "::/0"},
"next-hops": {"next-hop": [{"index": "1", "config": {"index": "1", "next-hop": "2001:db8::a", "preference": 220}}]}
}
]
}
}
]
},
"table-connections": {
"table-connection": [
{
"address-family": "openconfig-types:IPV4",
"dst-protocol": "openconfig-policy-types:BGP",
"src-protocol": "openconfig-policy-types:DIRECTLY_CONNECTED",
"config": {
"address-family": "openconfig-types:IPV4",
"default-import-policy": "REJECT_ROUTE",
"disable-metric-propagation": false,
"dst-protocol": "openconfig-policy-types:BGP",
"import-policy": ["redist_lo1_v4"],
"src-protocol": "openconfig-policy-types:DIRECTLY_CONNECTED"
}
},
{
"address-family": "openconfig-types:IPV6",
"dst-protocol": "openconfig-policy-types:BGP",
"src-protocol": "openconfig-policy-types:DIRECTLY_CONNECTED",
"config": {
"address-family": "openconfig-types:IPV6",
"default-import-policy": "REJECT_ROUTE",
"disable-metric-propagation": false,
"dst-protocol": "openconfig-policy-types:BGP",
"import-policy": ["redist_lo1_v6"],
"src-protocol": "openconfig-policy-types:DIRECTLY_CONNECTED"
}
}
]
},
"tables": {
"table": [
{
"address-family": "openconfig-types:IPV4",
"protocol": "openconfig-policy-types:BGP",
"config": {"address-family": "openconfig-types:IPV4", "protocol": "openconfig-policy-types:BGP"}
},
{
"address-family": "openconfig-types:IPV4",
"protocol": "openconfig-policy-types:DIRECTLY_CONNECTED",
"config": {"address-family": "openconfig-types:IPV4", "protocol": "openconfig-policy-types:DIRECTLY_CONNECTED"}
},
{
"address-family": "openconfig-types:IPV6",
"protocol": "openconfig-policy-types:BGP",
"config": {"address-family": "openconfig-types:IPV6", "protocol": "openconfig-policy-types:BGP"}
},
{
"address-family": "openconfig-types:IPV6",
"protocol": "openconfig-policy-types:DIRECTLY_CONNECTED",
"config": {"address-family": "openconfig-types:IPV6", "protocol": "openconfig-policy-types:DIRECTLY_CONNECTED"}
}
]
}
}
]
},
"qos": {
"classifiers": {
"classifier": [
{
"name": "dscp_af4_v4",
"config": {"name": "dscp_af4_v4", "type": "IPV4"},
"terms": {
"term": [
{"id": "0", "config": {"id": "0"}, "conditions": {"ipv4": {"config": {"dscp-set": [32]}}}, "actions": {"config": {"target-group": "AF4"}}},
{"id": "1", "config": {"id": "1"}, "conditions": {"ipv4": {"config": {"dscp-set": [0]}}}, "actions": {"config": {"target-group": "BE1"}}}
]
}
},
{
"name": "dscp_af4_v6",
"config": {"name": "dscp_af4_v6", "type": "IPV6"},
"terms": {
"term": [
{"id": "0", "config": {"id": "0"}, "conditions": {"ipv6": {"config": {"dscp-set": [32]}}}, "actions": {"config": {"target-group": "AF4"}}},
{"id": "1", "config": {"id": "1"}, "conditions": {"ipv6": {"config": {"dscp-set": [0]}}}, "actions": {"config": {"target-group": "BE1"}}}
]
}
}
]
},
"forwarding-groups": {
"forwarding-group": [
{"name": "AF4", "config": {"name": "AF4", "output-queue": "AF4"}},
{"name": "BE1", "config": {"name": "BE1", "output-queue": "BE1"}}
]
},
"interfaces": {
"interface": [
{
"interface-id": "port1",
"config": {"interface-id": "port1"},
"input": {
"classifiers": {
"classifier": [
{"type": "IPV4", "config": {"name": "dscp_af4_v4", "type": "IPV4"}},
{"type": "IPV6", "config": {"name": "dscp_af4_v6", "type": "IPV6"}}
]
}
},
"output": {
"queues": {"queue": [{"name": "AF4", "config": {"name": "AF4"}}, {"name": "BE1", "config": {"name": "BE1"}}]},
"scheduler-policy": {"config": {"name": "mgmt_qos_sched"}}
}
},
{
"interface-id": "port2",
"config": {"interface-id": "port2"},
"input": {
"classifiers": {
"classifier": [
{"type": "IPV4", "config": {"name": "dscp_af4_v4", "type": "IPV4"}},
{"type": "IPV6", "config": {"name": "dscp_af4_v6", "type": "IPV6"}}
]
}
},
"output": {
"queues": {"queue": [{"name": "AF4", "config": {"name": "AF4"}}, {"name": "BE1", "config": {"name": "BE1"}}]},
"scheduler-policy": {"config": {"name": "mgmt_qos_sched"}}
}
},
{
"interface-id": "port3",
"config": {"interface-id": "port3"},
"input": {
"classifiers": {
"classifier": [
{"type": "IPV4", "config": {"name": "dscp_af4_v4", "type": "IPV4"}},
{"type": "IPV6", "config": {"name": "dscp_af4_v6", "type": "IPV6"}}
]
}
},
"output": {
"queues": {"queue": [{"name": "AF4", "config": {"name": "AF4"}}, {"name": "BE1", "config": {"name": "BE1"}}]},
"scheduler-policy": {"config": {"name": "mgmt_qos_sched"}}
}
}
]
},
"queues": {
"queue": [
{"name": "AF4", "config": {"name": "AF4"}},
{"name": "BE1", "config": {"name": "BE1"}}
]
},
"scheduler-policies": {
"scheduler-policy": [
{
"name": "mgmt_qos_sched",
"config": {"name": "mgmt_qos_sched"},
"schedulers": {
"scheduler": [
{
"sequence": 0,
"config": {"priority": "STRICT", "sequence": 0, "type": "openconfig-qos-types:TWO_RATE_THREE_COLOR"},
"inputs": {"input": [{"id": "AF4", "config": {"id": "AF4", "input-type": "QUEUE", "queue": "AF4", "weight": "100"}}]}
},
{
"sequence": 1,
"config": {"sequence": 1, "type": "openconfig-qos-types:TWO_RATE_THREE_COLOR"},
"inputs": {"input": [{"id": "BE1", "config": {"id": "BE1", "input-type": "QUEUE", "queue": "BE1", "weight": "1"}}]}
}
]
}
}
]
}
},
"routing-policy": {
"defined-sets": {
"prefix-sets": {
"prefix-set": [
{
"name": "lo1_v4_prefix_set",
"config": {"mode": "IPV4", "name": "lo1_v4_prefix_set"},
"prefixes": {"prefix": [{"ip-prefix": "192.0.2.101/32", "masklength-range": "exact", "config": {"ip-prefix": "192.0.2.101/32", "masklength-range": "exact"}}]}
},
{
"name": "lo1_v6_prefix_set",
"config": {"mode": "IPV6", "name": "lo1_v6_prefix_set"},
"prefixes": {"prefix": [{"ip-prefix": "2001:db8::101/128", "masklength-range": "exact", "config": {"ip-prefix": "2001:db8::101/128", "masklength-range": "exact"}}]}
}
]
}
},
"policy-definitions": {
"policy-definition": [
{
"name": "redist_lo1_v4",
"config": {"name": "redist_lo1_v4"},
"statements": {
"statement": [
{
"name": "allow_lo1_v4",
"config": {"name": "allow_lo1_v4"},
"conditions": {"match-prefix-set": {"config": {"match-set-options": "ANY", "prefix-set": "lo1_v4_prefix_set"}}},
"actions": {"config": {"policy-result": "ACCEPT_ROUTE"}}
}
]
}
},
{
"name": "redist_lo1_v6",
"config": {"name": "redist_lo1_v6"},
"statements": {
"statement": [
{
"name": "allow_lo1_v6",
"config": {"name": "allow_lo1_v6"},
"conditions": {"match-prefix-set": {"config": {"match-set-options": "ANY", "prefix-set": "lo1_v6_prefix_set"}}},
"actions": {"config": {"policy-result": "ACCEPT_ROUTE"}}
}
]
}
}
]
}
},
"sampling": {
"sflow": {
"config": {"dscp": 32, "enabled": true, "ingress-sampling-rate": 1, "sample-size": 256},
"collectors": {
"collector": [
{"address": "198.51.100.1", "port": 6343, "config": {"address": "198.51.100.1", "network-instance": "mgmt", "port": 6343, "source-address": "192.0.2.101"}},
{"address": "2001:db8:100::1", "port": 6343, "config": {"address": "2001:db8:100::1", "network-instance": "mgmt", "port": 6343, "source-address": "2001:db8::101"}}
]
},
"interfaces": {"interface": [{"name": "port4", "config": {"enabled": true, "name": "port4"}}]}
}
},
"system": {
"aaa": {
"authentication": {"config": {"authentication-method": ["openconfig-aaa-types:TACACS_ALL"]}},
"server-groups": {
"server-group": [
{
"name": "TACACS-MGMT",
"config": {"name": "TACACS-MGMT", "type": "openconfig-aaa:TACACS"},
"servers": {
"server": [
{
"address": "198.51.100.1",
"config": {"address": "198.51.100.1", "timeout": 5},
"tacacs": {"config": {"port": 49, "secret-key": "tacacs-secret", "source-address": "192.0.2.101"}}
},
{
"address": "2001:db8:100::1",
"config": {"address": "2001:db8:100::1", "timeout": 5},
"tacacs": {"config": {"port": 49, "secret-key": "tacacs-secret", "source-address": "2001:db8::101"}}
}
]
}
}
]
}
},
"dns": {
"servers": {
"server": [
{"address": "198.51.100.1", "config": {"address": "198.51.100.1", "port": 53}},
{"address": "2001:db8:100::1", "config": {"address": "2001:db8:100::1", "port": 53}}
]
}
},
"grpc-servers": {
"grpc-server": [
{
"name": "mgmt-grpc",
"config": {
"enable": true,
"listen-addresses": ["192.0.2.101", "2001:db8::101"],
"name": "mgmt-grpc",
"network-instance": "mgmt",
"port": 9339,
"services": ["GNMI"]
}
},
{
"name": "mgmt-gribi",
"config": {
"enable": true,
"listen-addresses": ["192.0.2.101", "2001:db8::101"],
"name": "mgmt-gribi",
"network-instance": "mgmt",
"port": 9340,
"services": ["GRIBI"]
}
},
{
"name": "mgmt-p4rt",
"config": {
"enable": true,
"listen-addresses": ["192.0.2.101", "2001:db8::101"],
"name": "mgmt-p4rt",
"network-instance": "mgmt",
"port": 9559,
"services": ["P4RT"]
}
}
]
},
"logging": {
"remote-servers": {
"remote-server": [
{
"host": "198.51.100.1",
"config": {"host": "198.51.100.1", "network-instance": "mgmt", "remote-port": 514, "source-address": "192.0.2.101"},
"selectors": {"selector": [{"facility": "openconfig-system-logging:ALL", "severity": "INFORMATIONAL", "config": {"facility": "openconfig-system-logging:ALL", "severity": "INFORMATIONAL"}}]}
},
{
"host": "2001:db8:100::1",
"config": {"host": "2001:db8:100::1", "network-instance": "mgmt", "remote-port": 514, "source-address": "2001:db8::101"},
"selectors": {"selector": [{"facility": "openconfig-system-logging:ALL", "severity": "INFORMATIONAL", "config": {"facility": "openconfig-system-logging:ALL", "severity": "INFORMATIONAL"}}]}
}
]
}
},
"ntp": {
"config": {"enabled": true},
"servers": {
"server": [
{"address": "198.51.100.1", "config": {"address": "198.51.100.1", "network-instance": "mgmt", "source-address": "192.0.2.101"}},
{"address": "2001:db8:100::1", "config": {"address": "2001:db8:100::1", "network-instance": "mgmt", "source-address": "2001:db8::101"}}
]
}
},
"ssh-server": {"config": {"enable": true}}
}
}The below yaml defines the OC paths intended to be covered by this test.
paths:
## Config paths
/interfaces/interface/config/enabled:
/interfaces/interface/config/name:
/interfaces/interface/config/type:
/interfaces/interface/subinterfaces/subinterface/ipv4/addresses/address/config/ip:
/interfaces/interface/subinterfaces/subinterface/ipv4/addresses/address/config/prefix-length:
/interfaces/interface/subinterfaces/subinterface/ipv6/addresses/address/config/ip:
/interfaces/interface/subinterfaces/subinterface/ipv6/addresses/address/config/prefix-length:
/network-instances/network-instance/config/name:
/network-instances/network-instance/config/type:
/network-instances/network-instance/interfaces/interface/config/interface:
/network-instances/network-instance/protocols/protocol/bgp/global/config/as:
/network-instances/network-instance/protocols/protocol/bgp/global/config/router-id:
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/config/neighbor-address:
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/config/peer-as:
/network-instances/network-instance/protocols/protocol/static-routes/static/config/prefix:
/network-instances/network-instance/protocols/protocol/static-routes/static/next-hops/next-hop/config/index:
/network-instances/network-instance/protocols/protocol/static-routes/static/next-hops/next-hop/config/next-hop:
/network-instances/network-instance/protocols/protocol/static-routes/static/next-hops/next-hop/config/preference:
/network-instances/network-instance/table-connections/table-connection/config/address-family:
/network-instances/network-instance/table-connections/table-connection/config/default-import-policy:
/network-instances/network-instance/table-connections/table-connection/config/disable-metric-propagation:
/network-instances/network-instance/table-connections/table-connection/config/dst-protocol:
/network-instances/network-instance/table-connections/table-connection/config/import-policy:
/network-instances/network-instance/table-connections/table-connection/config/src-protocol:
/qos/classifiers/classifier/config/name:
/qos/classifiers/classifier/config/type:
/qos/classifiers/classifier/terms/term/actions/config/target-group:
/qos/classifiers/classifier/terms/term/conditions/ipv4/config/dscp-set:
/qos/classifiers/classifier/terms/term/conditions/ipv6/config/dscp-set:
/qos/classifiers/classifier/terms/term/config/id:
/qos/forwarding-groups/forwarding-group/config/name:
/qos/forwarding-groups/forwarding-group/config/output-queue:
/qos/interfaces/interface/config/interface-id:
/qos/interfaces/interface/input/classifiers/classifier/config/name:
/qos/interfaces/interface/input/classifiers/classifier/config/type:
/qos/interfaces/interface/output/queues/queue/config/name:
/qos/interfaces/interface/output/scheduler-policy/config/name:
/qos/queues/queue/config/name:
/qos/scheduler-policies/scheduler-policy/config/name:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/config/priority:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/config/sequence:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/config/type:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/config/id:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/config/input-type:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/config/queue:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/config/weight:
/routing-policy/defined-sets/prefix-sets/prefix-set/config/mode:
/routing-policy/defined-sets/prefix-sets/prefix-set/config/name:
/routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/ip-prefix:
/routing-policy/defined-sets/prefix-sets/prefix-set/prefixes/prefix/config/masklength-range:
/routing-policy/policy-definitions/policy-definition/config/name:
/routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result:
/routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/match-set-options:
/routing-policy/policy-definitions/policy-definition/statements/statement/conditions/match-prefix-set/config/prefix-set:
/routing-policy/policy-definitions/policy-definition/statements/statement/config/name:
/sampling/sflow/collectors/collector/config/address:
/sampling/sflow/collectors/collector/config/network-instance:
/sampling/sflow/collectors/collector/config/port:
/sampling/sflow/collectors/collector/config/source-address:
/sampling/sflow/config/dscp:
/sampling/sflow/config/enabled:
/sampling/sflow/config/ingress-sampling-rate:
/sampling/sflow/config/sample-size:
/sampling/sflow/interfaces/interface/config/enabled:
/sampling/sflow/interfaces/interface/config/name:
/system/aaa/authentication/config/authentication-method:
/system/aaa/server-groups/server-group/config/name:
/system/aaa/server-groups/server-group/config/type:
/system/aaa/server-groups/server-group/servers/server/config/address:
/system/aaa/server-groups/server-group/servers/server/config/timeout:
/system/aaa/server-groups/server-group/servers/server/tacacs/config/port:
/system/aaa/server-groups/server-group/servers/server/tacacs/config/secret-key:
/system/aaa/server-groups/server-group/servers/server/tacacs/config/source-address:
/system/dns/servers/server/config/address:
/system/dns/servers/server/config/port:
/system/grpc-servers/grpc-server/config/enable:
/system/grpc-servers/grpc-server/config/listen-addresses:
/system/grpc-servers/grpc-server/config/name:
/system/grpc-servers/grpc-server/config/network-instance:
/system/grpc-servers/grpc-server/config/port:
/system/grpc-servers/grpc-server/config/services:
/system/logging/remote-servers/remote-server/config/host:
/system/logging/remote-servers/remote-server/config/network-instance:
/system/logging/remote-servers/remote-server/config/remote-port:
/system/logging/remote-servers/remote-server/config/source-address:
/system/logging/remote-servers/remote-server/selectors/selector/config/facility:
/system/logging/remote-servers/remote-server/selectors/selector/config/severity:
/system/ntp/config/enabled:
/system/ntp/servers/server/config/address:
/system/ntp/servers/server/config/network-instance:
/system/ntp/servers/server/config/source-address:
/system/ssh-server/config/enable:
## State paths
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/state/session-state:
/qos/interfaces/interface/output/queues/queue/state/dropped-pkts:
/qos/interfaces/interface/output/queues/queue/state/name:
/qos/interfaces/interface/output/queues/queue/state/transmit-octets:
/qos/interfaces/interface/output/queues/queue/state/transmit-pkts:
/qos/interfaces/interface/output/scheduler-policy/state/name:
/qos/scheduler-policies/scheduler-policy/state/name:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/state/priority:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/state/sequence:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/state/type:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/state/id:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/state/input-type:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/state/queue:
/qos/scheduler-policies/scheduler-policy/schedulers/scheduler/inputs/input/state/weight:
/sampling/sflow/collectors/collector/state/address:
/sampling/sflow/collectors/collector/state/network-instance:
/sampling/sflow/collectors/collector/state/port:
/sampling/sflow/collectors/collector/state/source-address:
/sampling/sflow/state/dscp:
/sampling/sflow/state/enabled:
/system/aaa/authentication/state/authentication-method:
/system/aaa/server-groups/server-group/servers/server/state/address:
/system/aaa/server-groups/server-group/servers/server/tacacs/state/port:
/system/aaa/server-groups/server-group/servers/server/tacacs/state/source-address:
/system/dns/servers/server/state/address:
/system/dns/servers/server/state/port:
/system/grpc-servers/grpc-server/state/enable:
/system/grpc-servers/grpc-server/state/listen-addresses:
/system/grpc-servers/grpc-server/state/name:
/system/grpc-servers/grpc-server/state/network-instance:
/system/grpc-servers/grpc-server/state/port:
/system/grpc-servers/grpc-server/state/services:
/system/logging/remote-servers/remote-server/state/host:
/system/logging/remote-servers/remote-server/state/network-instance:
/system/logging/remote-servers/remote-server/state/remote-port:
/system/logging/remote-servers/remote-server/state/source-address:
/system/ntp/state/enabled:
/system/ntp/servers/server/state/address:
/system/ntp/servers/server/state/network-instance:
/system/ntp/servers/server/state/source-address:
/system/ssh-server/state/enable:
rpcs:
gnmi:
gNMI.Get:
gNMI.Set:
gNMI.Subscribe:
gnoi:
system.System.Ping:
system.System.Time:
gribi:
gRIBI.Get:
gRIBI.Modify:- MFF
-
Home
- Test Plans
- ACCTZ-1.1: Record Subscribe Full
- ACCTZ-2.1: Record Subscribe Partial
- ACCTZ-3.1: Record Subscribe Non-gRPC
- ACCTZ-4.1: Record History Truncation
- ACCTZ-4.2: Record Payload Truncation
- ACCTZ-5.1: gNSI.acctz.v1 (Accounting) Test RecordSubscribe Idle Timeout - client becomes silent
- ACCTZ-6.1: gNSI.acctz.v1 (Accounting) Test RecordSubscribe Idle Timeout - DoA client
- ACCTZ-7.1: gNSI.acctz.v1 (Accounting) Test Accounting Authentication Failure - Multi-transaction
- ACCTZ-8.1: gNSI.acctz.v1 (Accounting) Test Accounting Authentication Failure - Uni-transaction
- ACCTZ-9.1: gNSI.acctz.v1 (Accounting) Test Accounting Privilege Escalation
- ACCTZ-10.1: gNSI.acctz.v1 (Accounting) Test Accounting Authentication Error - Multi-transaction
- ACL-1.1: ACL match based on L3/L4 fields and DSCP value
- ACL-1.2: ACL Update (Make-before-break)
- ACL-1.3: Large Scale ACL with TCAM profile
- AFT-1.1: AFTs Base
- AFT-1.2: AFTs slow collector
- AFT-1.3: AFTs collector Flap
- AFT-2.1: AFTs Prefix Counters
- AFT-3.1: AFTs Atomic Flag Check
- AFT-5.1: AFTs DUT Reboot
- AFT-6.1: AFT Prefix Filtering
- AFT-6.2: AFT Prefix Filtering Dual-Stack
- AFT-6.3: AFT Prefix Filtering Resilience
- AFT-6.4: AFT Prefix Filtering Dynamic Updates
- attestz-1: General enrollz and attestz tests
- Authz-1.0: General Authz (1-4) tests
- Authz-5: gRPC Server Per-RPC Statistics YANG State Bounding
- BMP-1.1: BMP Session Establishment and Telemetry Test
- BMP-2.7: BMP Pre Policy Test
- BMP-2.8: BMP Post Policy Test
- bootz-1.0: General bootz bootstrap tests
- Certz-1: gNSI Client Certificate Tests
- Certz-2: Server Certificate
- Certz-3: Server Certificate Rotation
- Certz-4: Trust Bundle
- Certz-5: Trust Bundle Rotation
- CFM-1.1: CFM over ETHoCWoMPLSoGRE
- CNTR-1: Basic container lifecycle via
gnoi.Containerz. - CNTR-2: Container network connectivity tests
- CNTR-3: Container Supervisor Failover
- CPT-1.1: Interface based ARP policer
- Credentialz-1: Password console login
- Credentialz-2: SSH Password Login Disallowed
- Credentialz-3: Host Certificates
- Credentialz-4: SSH Public Key Authentication
- Credentialz-5: Hiba Authentication
- DP-1.2: QoS policy feature config
- DP-1.3: QoS ECN feature config
- DP-1.4: QoS Interface Output Queue Counters
- DP-1.5: Egress Strict Priority scheduler with bursty traffic
- DP-1.7: One strict priority queue traffic test
- DP-1.8: Two strict priority queue traffic test
- DP-1.9: WRR traffic test
- DP-1.10: Mixed strict priority and WRR traffic test
- DP-1.11: Bursty traffic test
- DP-1.12: ECN enabled traffic test
- DP-1.13: DSCP and ECN bits are copied over during IPinIP encap and decap
- DP-1.14: QoS basic test
- DP-1.15: Egress Strict Priority scheduler
- DP-1.16: Ingress traffic classification and rewrite
- DP-1.17: DSCP Transparency with ECN
- DP-1.19: Egress traffic DSCP rewrite
- DP-2.2: QoS scheduler with 1 rate 2 color policer, classifying on next-hop group
- DP-2.4: Police traffic on input matching all packets using 1 rate, 2 color marker
- DP-2.5: Police traffic on input matching all packets using 2 rate, 3 color marker
- DP-2.6: Police traffic on input matching all packets using 2 rate, 3 color marker with classifier
- enrollz-1: enrollz test for TPM 2.0 HMAC-based Enrollment flow
- enrollz-2: enrollz test for TPM 1.2 Enrollment flow
- example-0.1: Topology Test
- FP-1.1: Power admin DOWN/UP Test
- FPGA-1.1: FPGA Status Test
- gNMI-1.1: cli Origin
- gNMI-1.2: Benchmarking: Full Configuration Replace
- gNMI-1.3: Benchmarking: Drained Configuration Convergence Time
- gNMI-1.4: Telemetry: Inventory
- gNMI-1.5: Telemetry: Port Speed Test
- gNMI-1.6: System gRPC Servers running in more than one network-instance
- gNMI-1.7: gNMI Resiliency Test
- gNMI-1.8: Configuration Metadata-only Retrieve and Replace
- gNMI-1.9: Get requests
- gNMI-1.10: Telemetry: Basic Check
- gNMI-1.11: Telemetry: Interface Packet Counters
- gNMI-1.12: Mixed OpenConfig/CLI Origin
- gNMI-1.13: Optics Telemetry, Instant, threshold, and miscellaneous static info
- gNMI-1.14: OpenConfig metadata consistency during large config push
- gNMI-1.15: Set Requests
- gNMI-1.16: Fabric redundnacy test
- gNMI-1.17: Controller card redundancy test
- gNMI-1.18: gNMI subscribe with sample mode for backplane capacity counters
- gNMI-1.19: ConfigPush and ConfigPull after Control Card switchover
- gNMI-1.20: Telemetry: Optics Thresholds
- gNMI-1.21: Integrated Circuit Hardware Resource Utilization Test
- gNMI-1.22: Controller card port attributes
- gNMI-1.23: Telemetry: Aggregate Interface Counters
- gNMI-1.24: gNMI Leaf-List Update Test
- gNMI-1.25: Telemetry: Interface Last Change Timestamp
- gNMI-1.26: Carrier Transitions Test
- gNMI-1.27: gNMI Sample Mode Test
- gNMI-1.28: Telemetry: Interface openconfig validation.
- gNMI-1.29: Pipeline Counters Drops Test
- gNMI-1.30: gNMI Telemetry Performance under Dynamic Control Plane Churn
- gNMI-2: gnmi_subscriptionlist_test
- gNMI-3: union_replace
- gNOI-2.1: Packet-based Link Qualification on 100G and 400G links
- gNOI-3.1: Complete Chassis Reboot
- gNOI-3.2: Per-Component Reboot
- gNOI-3.3: Supervisor Switchover
- gNOI-3.4: Chassis Reboot Status and Reboot Cancellation
- gNOI-4.1: Software Upgrade
- gNOI-5.1: Ping Test
- gNOI-5.2: Traceroute Test
- gNOI-5.3: Copying Debug Files
- gNOI-6.1: Factory Reset
- gNOI-7.1: BootConfig
- gNPSI-1: Sampling and Subscription Check
- HA-1.0: Telemetry: Firewall High Availability.
- Hashing-1.0: Dataplane Hashing with Physical Loopbacks
- Health-1.1: Generic Health Check
- Health-1.2: Healthz component status paths
- INT-1.1: Interface Performance
- IPSEC-1.1: IPSec with MACSec over aggregated links.
- IPSEC-1.2: IPSec Scaling with MACSec over aggregated links.
- IPSEC-1.3: IPSec Packet-Order with MACSec over aggregated links.
- LB-1.1: wECMP Hashing Polarization Detection
- MGT-1: Management HA solution test
- MGT-2: QoS of Control and Management Traffic
- MPLS-1.1: MPLS label blocks using ISIS
- MPLS-1.2: MPLS Traffic Class Marking
- MPLS-2.2: MPLS forwarding via static LSP to BGP next-hop.
- MSEC-1.1: MACsec Configuration and Verification (DUT-to-DUT)
- MTU-1.3: Large IP Packet Transmission
- MTU-1.4: Large IP Packet through GRE/GUE tunnel Transmission
- MTU-1.5: Path MTU handing
- OC-1.2: Default Address Families
- OC-26.1: Network Time Protocol (NTP)
- P4RT-1.1: Base P4RT Functionality
- P4RT-1.2: P4RT Daemon Failure
- P4RT-1.3: P4RT behavior when a device/node is down
- P4RT-2.1: P4RT Election
- P4RT-2.2: P4RT Metadata Validation
- P4RT-3.1: Google Discovery Protocol: PacketIn
- P4RT-3.2: Google Discovery Protocol: PacketOut
- P4RT-3.3: P4RT Packet-Out Interaction with gRIBI
- P4RT-3.4: P4RT Packet-In Interaction with gRIBI
- P4RT-3.21: Google Discovery Protocol: PacketOut with LAG
- P4RT-5.1: Traceroute: PacketIn
- P4RT-5.2: Traceroute Packetout
- P4RT-5.3: Traceroute: PacketIn With VRF Selection
- P4RT-6.1: Required Packet I/O rate: Performance
- P4RT-7.1: LLDP: PacketIn
- P4RT-7.2: LLDP: PacketOut
- Pathz-1: Path-level Authorization (1-4) tests
- PF-1.1: IPv4/IPv6 policy-forwarding to indirect NH matching DSCP/TC.
- PF-1.2: Policy-based traffic GRE Encapsulation to IPv4 GRE tunnel
- PF-1.3: Policy-based IPv4 GRE Decapsulation
- PF-1.4: GUEv1 Decapsulation rule using destination-address-prefix-set and TTL and DSCP behavior test
- PF-1.6: Policy based VRF selection for IPV4/IPV6
- PF-1.7: Decapsulate MPLS in GRE and UDP
- PF-1.8: Ingress handling of TTL
- PF-1.9: Egress handling of TTL
- PF-1.11: Rewrite the ingress innner packet TTL
- PF-1.12: MPLSoGRE IPV4 decapsulation of IPV4/IPV6 payload
- PF-1.13: MPLSoGRE IPV4 decapsulation of IPV4/IPV6 payload scale test
- PF-1.14: MPLSoGRE IPV4 encapsulation of IPV4/IPV6 payload
- PF-1.15: MPLSoGRE IPV4 encapsulation of IPV4/IPV6 payload scale test
- PF-1.16: MPLSoGRE IPV4 encapsulation IPV4/IPV6 local proxy test
- PF-1.17: MPLSoGRE and MPLSoGUE MACsec
- PF-1.18: MPLSoGRE and MPLSoGUE QoS
- PF-1.19: MPLSoGUE IPV4 decapsulation of IPV4/IPV6 payload
- PF-1.20: MPLSoGUE IPV4 decapsulation of IPV4/IPV6 payload scale test
- PF-1.21: Configurable IPv6 flow labels corresponding to IPV6 tunnels
- PF-1.22: GUEv1 Decapsulation and ECMP test for IPv4 and IPv6 payload
- PF-1.23: EthoCWoMPLSoGRE IPV4 forwarding of IPV4/IPV6 payload
- PF-1.24: Add and remove interface bound to PBF
- PF-1.25: Egress Static MPLS LSP Verification
- PF-1.26: Double GUEv1 Decapsulation for Overlay Probing
- PF-1.27: MPLSoGRE/MPLSoGUE MACsec and Line Rate Performance
- PF-2.3: Multiple VRFs and GUE DECAP in Default VRF
- PLT-1.1: Interface breakout Test
- PLT-1.2: Parent component validation test
- PLT-1.3: OnChange Subscription Test for Breakout Interfaces
- RELAY-1.1: DHCP Relay functionality
- RT-1.1: Base BGP Session Parameters
- RT-1.2: BGP Policy & Route Installation
- RT-1.3: BGP Route Propagation
- RT-1.4: BGP Graceful Restart
- RT-1.5: BGP Prefix Limit
- RT-1.7: Local BGP Test
- RT-1.8: BGP Route Reflector Test at scale
- RT-1.10: BGP Keepalive and HoldTimer Configuration Test
- RT-1.11: BGP remove private AS
- RT-1.12: BGP always compare MED
- RT-1.14: BGP Long-Lived Graceful Restart
- RT-1.15: BGP Addpath on scale with and without routing policy
- RT-1.19: BGP 2-Byte and 4-Byte ASN support
- RT-1.21: BGP TCP MSS and PMTUD
- RT-1.22: BGP TCP MSS
- RT-1.23: BGP AFI SAFI OC DEFAULTS
- RT-1.24: BGP 2-Byte and 4-Byte ASN support with policy
- RT-1.25: Management network-instance default static route
- RT-1.26: Basic Static Route Support
- RT-1.27: Static route to BGP redistribution
- RT-1.28: BGP to IS-IS redistribution
- RT-1.29: BGP chained import/export policy attachment
- RT-1.30: BGP nested import/export policy attachment
- RT-1.31: BGP 3 levels of nested import/export policy with match-set-options
- RT-1.32: BGP policy actions - MED, LocPref, prepend, flow-control
- RT-1.33: BGP Policy with prefix-set matching
- RT-1.34: BGP route-distance configuration
- RT-1.35: BGP Graceful Restart Extended route retention (ExRR)
- RT-1.36: AIGP feature support test
- RT-1.51: BGP multipath ECMP
- RT-1.52: BGP multipath UCMP support with Link Bandwidth Community
- RT-1.53: prefix-list test
- RT-1.54: BGP Override AS-path split-horizon
- RT-1.55: BGP session mode (active/passive)
- RT-1.63: BGP Multihop
- RT-1.64: BGP Import/Export Policy (Control plane only) Functional Test Case
- RT-1.65: BGP scale test
- RT-1.67: IPv4 and IPv6 Static Route using Vlan Interface
- RT-1.71: BGP Disable Peer AS Filter (
disable-peer-as-filter) - RT-1.73: Static Route Resilience Test
- RT-1.102: DUT eBGP FNTs coverage for new L3VPN params
- RT-1.103: DUT iBGP passive listener FNT with common router id
- RT-1.106: BGP RT Membership Constraints (RFC 4684)
- RT-1.107: BGP FIB Isolation and Peer Soft Drain
- RT-1.108: Two-Tier BGP Route Propagation and Attribute Transparency
- RT-1.109: BGP Streaming Telemetry and Operational State Verification
- RT-1.110: Single-Hop BFD over eBGP Subinterfaces
- RT-1.111: BGP Autonomous System Confederations (RFC 5065)
- RT-2.1: Base IS-IS Process and Adjacencies
- RT-2.2: IS-IS LSP Updates
- RT-2.6: IS-IS Hello-Padding enabled at interface level
- RT-2.7: IS-IS Passive is enabled at interface level
- RT-2.8: IS-IS metric style wide not enabled
- RT-2.9: IS-IS metric style wide enabled
- RT-2.10: IS-IS change LSP lifetime
- RT-2.11: IS-IS Passive is enabled at the area level
- RT-2.12: Static route to IS-IS redistribution
- RT-2.13: Weighted-ECMP for IS-IS
- RT-2.14: IS-IS Drain Test
- RT-2.15: IS-IS Extensions for Segment Routing
- RT-2.16: IS-IS Graceful Restart Helper
- RT-2.17: IS-IS scale test
- RT-2.18: IS-IS Multi-adjacencies scale test
- RT-2.19: IS-IS Suppress Interface Reachability
- RT-3.1: Policy based VRF selection
- RT-3.2: Multiple <Protocol, DSCP> Rules for VRF Selection
- RT-3.4: VRF Selection Policy Hardware Programming with Linecard and Supervisor Resiliency
- RT-3.6: VRF Selection Policy Hardware Programming Across Multiple Linecards
- RT-3.52: Multidimensional test for Static GUE Encap/Decap based on BGP path selection and selective DSCP marking
- RT-3.53: Static route based GUE Encapsulation to IPv6 tunnel
- RT-4.10: AFTs Route Summary
- RT-4.11: AFTs Route Summary
- RT-5.1: Singleton Interface
- RT-5.2: Aggregate Interfaces
- RT-5.3: Aggregate Balancing
- RT-5.4: Aggregate Forwarding Viable
- RT-5.5: Interface hold-time
- RT-5.6: Interface Loopback mode
- RT-5.7: Aggregate Not Viable All
- RT-5.8: IPv6 Link Local
- RT-5.9: Disable IPv6 ND Router Arvetisment
- RT-5.10: IPv6 Link Local generated by SLAAC
- RT-5.11: LACP Intervals
- RT-5.12: Suppress IPv6 ND Router Advertisement [Depreciated]
- RT-5.13: Flow control test
- RT-5.14: Aggregate Subinterface in Default and Non-default Network Instance
- RT-5.15: LACP Fallback Support
- RT-5.16: LACP Member Linecard Reboot
- RT-5.17: Physical Interface Drain via Admin Down
- RT-5.18: Aggregate Interface (LAG) Drain via Admin Down
- RT-5.19: LAG Member-Link Drain
- RT-6.1: Core LLDP TLV Population
- RT-7.1: BGP default policies
- RT-7.2: BGP Policy Community Set
- RT-7.3: BGP Policy AS Path Set
- RT-7.4: BGP Policy AS Path Set and Community Set
- RT-7.5: BGP Policy - Match and Set Link Bandwidth Community
- RT-7.6: BGP Link Bandwidth Community - Cumulative
- RT-7.8: BGP Policy Match Standard Community and Add Community Import/Export Policy
- RT-7.9: BGP ECMP for iBGP with IS-IS protocol nexthop
- RT-7.10: Routing policy statement insertion and removal
- RT-7.11: BGP Policy - Import/Export Policy Action Using Multiple Criteria
- RT-7.12: BGP Drain using Route Policy
- RT-7.51: BGP Auto-Generated Link-Bandwidth Community
- RT-8: Singleton with breakouts
- RT-10.1: Default Route Generation based on 192.0.0.0/8 Presence
- RT-10.2: Non-default Route Generation based on 192.168.2.2/32 Presence in ISIS
- RT-14.2: GRIBI Route Test
- RT-14.3: Soft Drain vs. Hard Drain Convergence Verification
- SEC-3.1: Authentication
- SFLOW-1: sFlow Configuration and Sampling
- SFLOW-2: sFlow Egress Sampling Configuration and Verification
- SR-1.1: Transit forwarding to Node-SID via ISIS
- SR-1.2: Egress Node Forwarding for MPLS traffic with Explicit Null label
- Storage-1.1: Storage File System Check
- SYS-1.1: Test default COPP policy thresholds for Arista
- SYS-2.1: Ingress control-plane ACL.
- SYS-3.1: AAA and TACACS+ Configuration Verification Test Suite
- SYS-4.1: System Mount Points State Verification
- SYS-5.1: Configuration Commit Validation after Large gNMI-Set and reboot in parallel
- SYS-6.1: SSO Extended Forwarding and Stability Validation
- System-1.1: System banner test
- System-1.2: System g protocol test
- System-1.3: System hostname test
- System-1.4: System time test
- System-1.5: System software-version test
- TE-1.1: Static ARP
- TE-1.2: My Station MAC
- TE-1.3: P4RT ACL Interaction with gRIBI Forwarding
- TE-1.4: gRIBI Recursive Route Resolution under Routing Protocol Churn
- TE-1.7: gNMI Interface Config Change Impacting gRIBI NextHop
- TE-1.21: gRIBI Tunnel Fallback to Native Routing
- TE-1.22: Traffic Blackhole on gRIBI Invalid Next-Hop (Strict FIB Precedence)
- TE-2.1: gRIBI IPv4 Entry
- TE-2.2: gRIBI IPv4 Entry With Aggregate Ports
- TE-2.3: gRIBI IPv6 Entry with Prefix Length > 64
- TE-3.1: Base Hierarchical Route Installation
- TE-3.2: Traffic Balancing According to Weights
- TE-3.3: Hierarchical weight resolution
- TE-3.5: Ordering: ACK Received
- TE-3.6: ACK in the Presence of Other Routes
- TE-3.7: Base Hierarchical NHG Update
- TE-3.8: gRIBI Tunnel Recursion over Multi-Level LPM Underlays
- TE-3.9: gRIBI AFT Operations Ordering
- TE-3.10: gRIBI WCMP Group Resizing and Weight Changes
- TE-3.31: Hierarchical weight resolution with PBF
- TE-4.1: Base Leader Election
- TE-4.2: Persistence Mode
- TE-5.1: gRIBI Get RPC
- TE-6.1: Route Removal via Flush
- TE-6.2: Route Removal In Non Default VRF
- TE-6.3: Route Leakage between Non Default VRF
- TE-6.4: gRIBI to BGP Route Redistribution for IPv4
- TE-8.1: DUT Daemon Failure
- TE-8.2: Supervisor Failure
- TE-9.1: gRIBI MPLS Compliance
- TE-9.3: FIB FAILURE DUE TO HARDWARE RESOURCE EXHAUST
- TE-10: gRIBI MPLS Forwarding
- TE-11.1: Backup NHG: Single NH
- TE-11.2: Backup NHG: Multiple NH
- TE-11.3: Backup NHG: Actions
- TE-11.4: gRIBI BACKUP_ACTIVATE Hardware Convergence & FIB ACK Verification
- TE-11.21: Backup NHG: Multiple NH with PBF
- TE-11.31: Backup NHG: Actions with PBF
- TE-13.1: gRIBI route ADD during Failover
- TE-13.2: gRIBI route DELETE during Failover
- TE-14.1: gRIBI Scaling
- TE-14.2: encap and decap scale
- TE-14.3: gRIBI Scaling - full scale setup, target T1
- TE-14.4: gRIBI Scaling - full scale setup, target T2
- TE-14.5: gRIBI Scaling - full scale setup, target T0
- TE-14.6: gRIBI Scaling - all scenarios but with minimal scaling parameters
- TE-14.7: gRIBI Scaling - full scale setup, target T3
- TE-15.1: gRIBI Compliance
- TE-16.1: basic encapsulation tests
- TE-16.2: encapsulation FRR scenarios
- TE-16.3: encapsulation FRR scenarios
- TE-17.1: VRF selection policy driven TE
- TE-18.1: gRIBI MPLS-in-UDP Encapsulation
- TE-18.3: MPLS in UDP Encapsulation Scale Test
- TE-18.4: ECMP hashing on outer and inner packets with MPLSoUDP encapsulation
- TR-6.1: Remote Syslog feature config
- TR-6.2: Local logging destinations
- TRANSCEIVER-1.1: Telemetry: 400ZR Chromatic Dispersion(CD) telemetry values streaming
- TRANSCEIVER-1.2: Telemetry: 400ZR_PLUS Chromatic Dispersion(CD) telemetry values streaming
- TRANSCEIVER-3.1: Telemetry: 400ZR Optics firmware version streaming
- TRANSCEIVER-3.2: Telemetry: 400ZR_PLUS Optics firmware version streaming
- TRANSCEIVER-4.1: Telemetry: 400ZR RX input and TX output power telemetry values streaming.
- TRANSCEIVER-4.2: Telemetry: 400ZR_PLUS RX input and TX output power telemetry values streaming.
- TRANSCEIVER-5.1: Configuration: 400ZR channel frequency, output TX launch power and operational mode setting.
- TRANSCEIVER-5.2: Configuration: 400ZR_PLUS channel frequency, output TX launch power and operational mode setting.
- TRANSCEIVER-6.1: Telemetry: 400ZR Optics performance metrics (pm) streaming.
- TRANSCEIVER-6.2: Telemetry: 400ZR_PLUS Optics performance metrics (pm) streaming.
- TRANSCEIVER-7.1: Telemetry: 400ZR Optics inventory info streaming
- TRANSCEIVER-7.2: Telemetry: 400ZR_PLUS Optics inventory info streaming
- TRANSCEIVER-8.1: Telemetry: 400ZR Optics module temperature streaming.
- TRANSCEIVER-8.2: Telemetry: 400ZR_PLUS Optics module temperature streaming.
- TRANSCEIVER-9.1: Telemetry: 400ZR TX laser bias current telemetry values streaming.
- TRANSCEIVER-9.2: Telemetry: 400ZR_PLUS TX laser bias current telemetry values streaming.
- TRANSCEIVER-10.1: Telemetry: 400ZR Optics FEC(Forward Error Correction) Uncorrectable Frames Streaming.
- TRANSCEIVER-10.2: Telemetry: 400ZR_PLUS Optics FEC(Forward Error Correction) Uncorrectable Frames Streaming.
- TRANSCEIVER-11.1: Telemetry: 400ZR Optics logical channels provisioning and related telemetry.
- TRANSCEIVER-11.2: Telemetry: 400ZR_PLUS Optics logical channels provisioning and related telemetry.
- TRANSCEIVER-12.1: Telemetry: 400ZR Transceiver Supply Voltage streaming.
- TRANSCEIVER-12.2: Telemetry: 400ZR_PLUS Transceiver Supply Voltage streaming.
- TRANSCEIVER-13.1: Configuration: 400ZR Transceiver Low Power Mode Setting.
- TRANSCEIVER-13.2: Configuration: 400ZR_PLUS Transceiver Low Power Mode Setting.
- TRANSCEIVER-20.1: Client Optics DOM Telemetry, Instant, Threshold, and Miscellaneous Static Info
- TRANSCEIVER-101: Telemetry: ZR platform OC paths streaming.
- TRANSCEIVER-102: Telemetry: ZR terminal-device OC paths streaming.
- TRANSCEIVER-103: Telemetry: ZR Plus platform OC paths streaming.
- TRANSCEIVER-104: Telemetry: ZR Plus terminal-device OC paths streaming.
- TRANSCEIVER-105: Telemetry: ZR platform OC paths streaming.
- TRANSCEIVER-106: Telemetry: ZR terminal-device OC paths streaming.
- TRANSCEIVER-107: Telemetry: ZR Plus platform OC paths streaming.
- TRANSCEIVER-108: Telemetry: ZR Plus terminal-device OC paths streaming.
- TRANSCEIVER-109: 400ZR / 800ZR Operational Mode Transition and Inventory Persistence
- TUN-1.3: Interface based IPv4 GRE Encapsulation
- TUN-1.4: Interface based IPv6 GRE Encapsulation
- TUN-1.6: Tunnel End Point Resize for Ecapsulation - Interface Based GRE Tunnel
- TUN-1.9: GRE inner packet DSCP
- URPF-1.1: uRPF validation from non-default network-instance
- Test Plans