gribi_full_scale_t3

TE-14.7: gRIBI Scaling - full scale setup, target T3

Summary

Validate gRIBI scaling requirements for Target T3.

This test shares its topology, baseline configuration, procedures, test cases, and OpenConfig specifications with the other gRIBI full-scale targets. See the Generic gRIBI Scaling README for full details.

---

Scaling Parameters

The test is configured with the following parameters defined in gribi_full_scale_t3_test.go:

gRIBI & System Configuration

• GRIBIBatchSize: 2,000

Default VRF

• NumDefaultNH: 1,000
• NumDefaultNHG: 1,000
• NumDefaultIPv4: 1,000
• DefaultNHGLoadBalance:
  • 40% (400) NHGs load-balance across 8 NHs
  • 40% (400) NHGs load-balance across 16 NHs
  • 15% (150) NHGs load-balance across 32 NHs
  • 5% (50) NHGs load-balance across 64 NHs
• DefaultNHGWeight:
  • 70% (700) NHGs have WCMP granularity 1/512
  • 30% (300) NHGs have WCMP granularity 1/1024

Transit VRF

• NumTransitNH: 4,000
• NumTransitNHG: 2,000
• TransitNHGLoadBalance: 100% of NHGs pointing to 2 NHs
• TransitNHGWeight: 100% of NHGs have WCMP granularity 1/64 (1:63 weight ratio)
• NumTransitIPv4: 200,000

Repair VRF

• NumRepairIPv4: 200,000
• NumRepairNHG: 2,000

Encap VRFs

• NumEncapVRFs: 16
• NumEncapIPv4PerVRF: 9,000
• NumEncapIPv6PerVRF: 11,000
• NumUniqueEncapNH: 32,000
• NumEncapDefaultNHG: 8,000
• EncapNHGLoadBalance:
  • 75% NHGs load-balance across 4 NHs
  • 20% NHGs load-balance across 8 NHs
  • 3% NHGs load-balance across 16 NHs
  • 2% NHGs load-balance across 32 NHs
• EncapNHGWeight:
  • 75% NHGs have WCMP granularity 1/32
  • 20% NHGs have WCMP granularity 1/64
  • 3% NHGs have WCMP granularity 1/128
  • 2% NHGs have WCMP granularity 1/256

Decap VRF

• NumDecapEntries: 50
• DecapDestsSubsetPct: 100%

OTG / Port Configuration

• NumPort2VLANs: 640

Traffic Parameters

• TrafficRateMpps: 30,000,000 (30 Mpps)
• TrafficDuration: 5 minutes
• TrafficLossTol: 5

Canonical OC

{}

OpenConfig Path and RPC Coverage

rpcs:
  gnmi:
    gNMI.Get:
    gNMI.Set:
    gNMI.Subscribe:
  gribi:
    gRIBI.Get:
    gRIBI.Modify:
    gRIBI.Flush: