Skip to content

client_optics_dom_telemetry_test

Jump to bottom
Github Action edited this page Sep 19, 2026 · 1 revision

TRANSCEIVER-20.1: Client Optics DOM Telemetry, Instant, Threshold, and Miscellaneous Static Info

Summary

Validate client optics digital optical monitoring (DOM) streaming telemetry performance monitoring parameters like input power, output power, bias current, supply voltage, module temperature, and so on.

Setup

Optics test requirements alongside the platform functional tests require optics DUT samples connected across optical ethernet interfaces.

Procedure

  • Step 1: Ensure interfaces and transceivers are enabled, wait for link UP, and validate inventory and telemetry:

    • Validate static inventory metadata: /components/component/state/mfg-name, /components/component/transceiver/state/form-factor, /components/component/state/serial-no, /components/component/state/part-no, /components/component/state/firmware-version, /components/component/state/hardware-version, /components/component/state/description, /components/component/state/mfg-date, /components/component/transceiver/physical-channels/channel/state/index, /interfaces/interface/state/physical-channel, /interfaces/interface/state/transceiver.
    • Validate dynamic telemetry instant values are within the normal operating range bounded by WARNING and CRITICAL lower/upper thresholds (i.e., no threshold alarms are expected to be triggered during normal operation): module temperature, Tx output power, Rx input power, laser bias-current, and supply voltage.
      • Nested-threshold rules apply: critical_lower <= warning_lower <= instant <= warning_upper <= critical_upper.
      • Some hardware platforms or pluggables may report equal values for warning and critical thresholds (e.g., warning_upper == critical_upper or warning_lower == critical_lower), which is valid and supported.

  • Step 2: Verify interface enable/disable lifecycle:

    • Disable/shutdown interface: verify oper-status DOWN and output power drops.
    • Re-enable interface: wait for link UP and verify telemetry parameters return to normal within thresholds.

  • Step 3: Verify transceiver config enabled on/off lifecycle:

    • Set /components/component/transceiver/config/enabled to false: verify oper-status is not UP and transceiver disabled.
    • Set /components/component/transceiver/config/enabled to true: wait for link UP and verify all telemetry parameters are valid and within thresholds.

Canonical OC

{}

OpenConfig Path and RPC Coverage

The below yaml defines the OC paths intended to be covered by this test.

paths:
  # Config Parameter coverage
  /components/component/transceiver/config/enabled:
    platform_type: ["TRANSCEIVER"]
  /interfaces/interface/config/enabled:

  # Telemetry Parameter coverage
  /components/component/transceiver/state/enabled:
    platform_type: ["TRANSCEIVER"]
  /components/component/state/firmware-version:
    platform_type: ["TRANSCEIVER"]
  /components/component/state/mfg-name:
    platform_type: ["TRANSCEIVER"]
  /components/component/state/part-no:
    platform_type: ["TRANSCEIVER"]
  /components/component/state/serial-no:
    platform_type: ["TRANSCEIVER"]
  /components/component/state/temperature/instant:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/physical-channels/channel/state/index:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/physical-channels/channel/state/input-power/instant:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/physical-channels/channel/state/laser-bias-current/instant:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/physical-channels/channel/state/output-power/instant:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/state/supply-voltage/instant:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/state/form-factor:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/input-power-lower:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/input-power-upper:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/laser-bias-current-lower:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/laser-bias-current-upper:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/module-temperature-lower:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/module-temperature-upper:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/output-power-lower:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/output-power-upper:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/severity:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/supply-voltage-lower:
    platform_type: ["TRANSCEIVER"]
  /components/component/transceiver/thresholds/threshold/state/supply-voltage-upper:
    platform_type: ["TRANSCEIVER"]
  /interfaces/interface/state/oper-status:
  /interfaces/interface/state/physical-channel:
  /interfaces/interface/state/transceiver:

rpcs:
  gnmi:
    gNMI.Get:
    gNMI.Set:
    gNMI.Subscribe:

Clone this wiki locally