User Guide: Use When Then Rules

When-Then rules are used in combination with the or-rules UI component. They are meant to be used to allow application users to define 'When this, then this' statements. For example "turn on a light 5 minutes before sunset" or "send push notification to anybody who reaches the stadium".

Guide to setting up your first When-Then rule

To get familiar with the When-Then interface we will be creating a rule that turns on lights when the temperature drops below a certain threshold or when the humidity is higher than 75 (makes sense right?). We only want this rule to be active on Friday evening. This guide assumes you are using the Demo. Otherwise you need to create some assets first.

1. Switch from the master realm to the Smart city realm in the top. You will see the assets we use a demo setup.
2. Navigate to the Rules page, here you will find some demo rules that are running at the moment. We will add our own.
3. Add a new rule:
   • Click the +
   • Select 'When-Then'
   • Name it Weather: control lights
4. Create the When side of the rule:
   • Click the +, a list of asset types will appear
   • Select Weather Asset, the next will appear showing Any of this type
   • Switch to the asset named Weather
   • In the next field select the attribute of interest: temperature
   • In the next field select the operator: less than
   • Finally set a value of 10. You have now finished the first condition. This can be combined through AND or OR with other conditions.
5. Create a second condition to monitor the humidity:
   • Click the + in the section below where it says Or when and select Weather
   • Switch to Weather
   • Select: humidity
   • Select: greater than
   • Set a value of 75. You have finished the OR condition. If this or the previous condition is met, the Then actions will trigger.
6. Create an action on the Then side of the rule:
   • Click the + on the right in the Then section
   • Select the Light Asset asset type.
   • Select the lights that you want to control. In this case we want to turn on all lights at once using the Lighting Noordereiland.
   • Select the attribute you want to control: On Off
   • Toggle the switch on. The Actions are done.
7. Set the schedule for this rule:
   • Open up the scheduler by clicking Always active next to the rules name.
   • Select 'Plan a repeating occurrence' as we want the rule to work every friday evening
   • Deselect all day and use the calendar picker of the Start date to select the upcoming friday, and set the time to 18:00
   • For the end date make sure you have the same date selected and set the time to 23:00. Your first friday evening is planned.
   • At Repeat occurrence every click Friday
   • Leave the Repetition ends at Never
   • Click Apply and save the rule in the top right.

Your rule is finished! Every Friday evening the rule will check if one of the two conditions is met and if so, turns on the lights of Noordereiland.

See Also

• Create Rules
• Create Groovy Rules
• Use Flow Rules
• Manager UI Guide