TELCODOCS-2100 - redoing PR 100372

modules/nw-ptp-t-bc-t-tsc-holdover.adoc

@@ -0,0 +1,368 @@
+// Module included in the following assemblies:
+//
+// * networking/ptp/configuring-ptp.adoc
+
+:_mod-docs-content-type: PROCEDURE
+[id="nw-ptp-t-bc-t-tsc-holdover_{context}"]
+= Applying unassisted holdover for boundary clocks and time slave clocks
+
+The unassisted holdover feature enables an Intel E810-XXVDA4T Network Interface Card (NIC), configured as either a PTP boundary clock (T-BC) or a PTP time slave clock (T-TSC), to maintain highly accurate time synchronization even when the upstream timing signal is lost. This is achieved by relying on the NIC's internal oscillator to enter a stable, controlled drift state.
+
+The `ts2phc` service monitors the `ptp4l` instance bound to the timing receiver (TR) port. If, for example, the TR port stops operating as the time receiver, the upstream grandmaster clock (T-GM) deteriorates in quality or the link disconnects, the system enters holdover mode and reconfigures itself dynamically.
+
+:FeatureName: Applying unassisted holdover for T-BC and T-TSC
+include::snippets/technology-preview.adoc[leveloffset=+1]
+
+.Prerequisites
+* Install the OpenShift CLI (`oc`).
+* Log in as a user with `cluster-admin` privileges.
+* Install the PTP Operator.
+* An Intel E810-XXVDA4T NIC.
+
+.Procedure
+
+. Configure the triple port T-BC NIC. See the example below where the `PtpConfig` resource contains two profiles, one for time transmitter ports (00-tbc-tt) and one to configure all the hardware, the TR port, and `ts2phc` and `phc2sys` processes:
++
+[source,yaml]
+----
+apiVersion: ptp.openshift.io/v1
+kind: PtpConfig
+metadata:
+  name: t-bc
+  namespace: openshift-ptp
+spec:
+  profile:
+  - name: 00-tbc-tt
+    ptp4lConf: |
+      [ens4f0]
+      masterOnly 1 <1>
+      [ens8f0]
+      masterOnly 1 <1>
+      [ens1f0]
+      masterOnly 1 <1>
+      [global]
+      #
+      # Default Data Set
+      #
+      twoStepFlag 1
+      slaveOnly 0
+      priority1 128
+      priority2 128
+      domainNumber 25
+      clockClass 248
+      clockAccuracy 0xFE
+      offsetScaledLogVariance 0xFFFF
+      free_running 0
+      freq_est_interval 1
+      dscp_event 0
+      dscp_general 0
+      dataset_comparison G.8275.x
+      G.8275.defaultDS.localPriority 128
+      #
+      # Port Data Set
+      #
+      logAnnounceInterval -3
+      logSyncInterval -4
+      logMinDelayReqInterval -4
+      logMinPdelayReqInterval -4
+      announceReceiptTimeout 3
+      syncReceiptTimeout 0
+      delayAsymmetry 0
+      fault_reset_interval -4
+      neighborPropDelayThresh 20000000
+      masterOnly 0
+      G.8275.portDS.localPriority 128
+      #
+      # Run time options
+      #
+      assume_two_step 0
+      logging_level 6
+      path_trace_enabled 0
+      follow_up_info 0
+      hybrid_e2e 0
+      inhibit_multicast_service 0
+      net_sync_monitor 0
+      tc_spanning_tree 0
+      tx_timestamp_timeout 50
+      unicast_listen 0
+      unicast_master_table 0
+      unicast_req_duration 3600
+      use_syslog 1
+      verbose 0
+      summary_interval 0
+      kernel_leap 1
+      check_fup_sync 0
+      clock_class_threshold 135
+      #
+      # Servo Options
+      #
+      pi_proportional_const 0.60
+      pi_integral_const 0.001
+      pi_proportional_scale 0.0
+      pi_proportional_exponent -0.3
+      pi_proportional_norm_max 0.7
+      pi_integral_scale 0.0
+      pi_integral_exponent 0.4
+      pi_integral_norm_max 0.3
+      step_threshold 2.0
+      first_step_threshold 0.00002
+      max_frequency 900000000
+      clock_servo pi
+      sanity_freq_limit 200000000
+      ntpshm_segment 0
+      #
+      # Transport options
+      #
+      transportSpecific 0x0
+      ptp_dst_mac AA:BB:CC:DD:EE:FF
+      p2p_dst_mac BB:CC:DD:EE:FF:GG
+      udp_ttl 1
+      udp6_scope 0x0E
+      uds_address /var/run/ptp4l
+      #
+      # Default interface options
+      #
+      clock_type BC
+      network_transport L2
+      delay_mechanism E2E
+      time_stamping hardware
+      tsproc_mode filter
+      delay_filter moving_median
+      delay_filter_length 10
+      egressLatency 0
+      ingressLatency 0
+      boundary_clock_jbod 1
+      #
+      # Clock description
+      #
+      productDescription ;;
+      revisionData ;;
+      manufacturerIdentity 00:00:00
+      userDescription ;
+      timeSource 0xA0
+    ptp4lOpts: -2 --summary_interval -4
+    ptpSchedulingPolicy: SCHED_FIFO
+    ptpSchedulingPriority: 10
+    ptpSettings:
+      controllingProfile: 01-tbc-tr
+      logReduce: "false"
+  - name: 01-tbc-tr
+    phc2sysOpts: -r -n 25 -N 8 -R 16 -u 0 -m -s ens4f1 <2>
+    plugins: <3>
+      e810:
+        enableDefaultConfig: false
+        interconnections: <4>
+        - gnssInput: false
+          id: ens4f0
+          part: E810-XXVDA4T
+          phaseOutputConnectors:
+          - SMA1
+          - SMA2
+          upstreamPort: ens4f1
+        - id: ens1f0
+          inputConnector:
+            connector: SMA1
+          part: E810-XXVDA4T
+        - id: ens8f0
+          inputConnector:
+            connector: SMA1
+          part: E810-XXVDA4T
+        pins:
+          ens4f0:
+            SMA1: 2 1
+            SMA2: 2 2
+            U.FL1: 0 1
+            U.FL2: 0 2
+          ens1f0:
+            SMA1: 1 1
+            SMA2: 0 2
+            U.FL1: 0 1
+            U.FL2: 0 2
+          ens8f0:
+            SMA1: 1 1
+            SMA2: 0 2
+            U.FL1: 0 1
+            U.FL2: 0 2
+        settings:
+          LocalHoldoverTimeout: 14400
+          LocalMaxHoldoverOffSet: 1500
+          MaxInSpecOffset: 100
+    ptp4lConf: |
+      # The interface name is hardware-specific
+      [ens4f1]
+      masterOnly 0
+      [global]
+      #
+      # Default Data Set
+      #
+      twoStepFlag 1
+      slaveOnly 0
+      priority1 128
+      priority2 128
+      domainNumber 25
+      clockClass 248
+      clockAccuracy 0xFE
+      offsetScaledLogVariance 0xFFFF
+      free_running 0
+      freq_est_interval 1
+      dscp_event 0
+      dscp_general 0
+      dataset_comparison G.8275.x
+      G.8275.defaultDS.localPriority 128
+      #
+      # Port Data Set
+      #
+      logAnnounceInterval -3
+      logSyncInterval -4
+      logMinDelayReqInterval -4
+      logMinPdelayReqInterval -4
+      announceReceiptTimeout 3
+      syncReceiptTimeout 0
+      delayAsymmetry 0
+      fault_reset_interval -4
+      neighborPropDelayThresh 20000000
+      masterOnly 0
+      G.8275.portDS.localPriority 128
+      #
+      # Run time options
+      #
+      assume_two_step 0
+      logging_level 6
+      path_trace_enabled 0
+      follow_up_info 0
+      hybrid_e2e 0
+      inhibit_multicast_service 0
+      net_sync_monitor 0
+      tc_spanning_tree 0
+      tx_timestamp_timeout 50
+      unicast_listen 0
+      unicast_master_table 0
+      unicast_req_duration 3600
+      use_syslog 1
+      verbose 0
+      summary_interval 0
+      kernel_leap 1
+      check_fup_sync 0
+      clock_class_threshold 135
+      #
+      # Servo Options
+      #
+      pi_proportional_const 0.60
+      pi_integral_const 0.001
+      pi_proportional_scale 0.0
+      pi_proportional_exponent -0.3
+      pi_proportional_norm_max 0.7
+      pi_integral_scale 0.0
+      pi_integral_exponent 0.4
+      pi_integral_norm_max 0.3
+      step_threshold 2.0
+      first_step_threshold 0.00002
+      max_frequency 900000000
+      clock_servo pi
+      sanity_freq_limit 200000000
+      ntpshm_segment 0
+      #
+      # Transport options
+      #
+      transportSpecific 0x0
+      ptp_dst_mac AA:BB:CC:DD:EE:HH
+      p2p_dst_mac BB:CC:DD:EE:FF:II
+      udp_ttl 1
+      udp6_scope 0x0E
+      uds_address /var/run/ptp4l
+      #
+      # Default interface options
+      #
+      clock_type OC
+      network_transport L2
+      delay_mechanism E2E
+      time_stamping hardware
+      tsproc_mode filter
+      delay_filter moving_median
+      delay_filter_length 10
+      egressLatency 0
+      ingressLatency 0
+      boundary_clock_jbod 1
+      #
+      # Clock description
+      #
+      productDescription ;;
+      revisionData ;;
+      manufacturerIdentity 00:00:00
+      userDescription ;
+      timeSource 0xA0
+    ptp4lOpts: -2 --summary_interval -4
+    ptpSchedulingPolicy: SCHED_FIFO
+    ptpSchedulingPriority: 10
+    ptpSettings:
+      inSyncConditionThreshold: "10"
+      inSyncConditionTimes: "12"
+      logReduce: "false"
+    ts2phcConf: |
+      [global]
+      use_syslog  0
+      verbose 1
+      logging_level 7
+      ts2phc.pulsewidth 100000000
+      leapfile  /usr/share/zoneinfo/leap-seconds.list
+      domainNumber 25 <5>
+      uds_address /var/run/ptp4l.0.socket <6>
+      [ens4f0] <7>
+      ts2phc.extts_polarity rising
+      ts2phc.extts_correction -10
+      ts2phc.master 0
+      [ens1f0]
+      ts2phc.extts_polarity rising
+      ts2phc.extts_correction -27
+      ts2phc.master 0
+      [ens8f0]
+      ts2phc.extts_polarity rising
+      ts2phc.extts_correction -27
+      ts2phc.master 0
+    ts2phcOpts: -s generic -a --ts2phc.rh_external_pps 1 <8>
+  recommend:
+  - match:
+    - nodeLabel: node-role.kubernetes.io/master
+    priority: 4
+    profile: 00-tbc-tt
+  - match:
+    - nodeLabel: node-role.kubernetes.io/master
+    priority: 4
+    profile: 01-tbc-tr
+----
+<1> All TT ports have the `masterOnly` set to 1.
+<2> The `phc2sysOpts` setting in the TR profile specifies the upstream port `ens4f1` as the source of the node time synchronization.
+<3> The TR profile contains the hardware plugin section.
+<4> The interconnections section in the hardware plugin has three NICs: `ens4f0`, `ens1f0`, and `ens8f0`. The leading NIC, `ens4f0`, is the only one with the `gnnsInput` field, set to `false`, and the `upstreamPort` field that specifies the TR port. It also has a list of `phaseOutputConnectors`, `SMA1` and `SMA2`. The following NICs have the `inputConnector` field. Set the time receiver NIC `ens4f0` and the specific TR port. that is `upstreamPort: ens4f1`, for both T-BC and T-TSC configurations.
+<5> The `ts2phc` configuration contains the `domainNumber` of the upstream PTP domain.
+<6> The `ts2phc` configuration contains the `uds_address`. Its value is not important because the daemon patches it with the correct address.
+<7> The `ts2phc` configuration must include all NICs participating in this setup (`ens4f0`, `ens1f0`, and `ens8f0`).
+<8> `ts2phcOpts` sets the source as generic with `-s generic` and automatic with `-a`. The last option, `--ts2phc.rh_external_pps 1`, configures it to operate with external phase source, the digital phase-locked loop (DPLL).
++
+[NOTE]
+====
+In the single-NIC case, disable all pins or enable outputs if using for 1PPS measurements.
+====
+
+[NOTE]
+====
+To render this configuration for T-TSC operation, remove the `00-tbc-tt` profile and adjust the `ts2phcConf` section to list only the TR NIC.
+====
+
+.Verification
+
+To get the T-BC status, run the following command:
+
+[source,terminal]
+----
+$ oc -linuxptp-daemon-container logs ds/linuxptp-daemon --since=1s -f |grep T-BC
+----
+
+.Example output
+[source,terminal]
+----
+T-BC[1760525446]:[ts2phc.1.config] ens4f0 offset 1 T-BC-STATUS s2
+T-BC[1760525447]:[ts2phc.1.config] ens4f0 offset 1 T-BC-STATUS s2
+T-BC[1760525448]:[ts2phc.1.config] ens4f0 offset -1 T-BC-STATUS s2
+----
+This is reported every second, where `s2` indicates it is locked, `s1` indicates holdover is activated, and `s0`, unlocked.

networking/advanced_networking/ptp/configuring-ptp.adoc

@@ -46,6 +46,8 @@ include::modules/nw-ptp-three-nic-hardware-config-reference.adoc[leveloffset=+2]
 
 include::modules/nw-ptp-holdover-in-a-grandmaster-clock.adoc[leveloffset=+1]
 
+include::modules/nw-ptp-t-bc-t-tsc-holdover.adoc[leveloffset=+1]
+
 [role="_additional-resources"]
 .Additional resources