ESP-KVM terminal: an M5Stack Tab5 as a screen for ESP-KVM - would you use one?

[dexif]

I made ESP-KVM terminal, a separate experimental firmware for the M5Stack Tab5. It is not the KVM itself: it connects to an ESP-KVM device over the network, shows the target's screen on the Tab5 and controls the target, with no browser and no computer. The Tab5 has the same ESP32-P4 as the KVM, so I wanted to see what it could do.

What it does now: finds ESP-KVM devices on the network, signs in, shows the target's screen at up to about 20 fps at 1280x720 (MJPEG), touch as the pointer or a trackpad, pinch to zoom, the Keyboard for Tab5 or a USB keyboard and mouse, the power and reset buttons. It works over Tailscale too.

• What it is and how to install it: https://espkvm.io/terminal/
• Code and releases: https://github.com/espkvm/espkvm-term

I do not know yet whether anyone needs this. Vote above, and if you have a minute:

1. Why did you vote the way you did?
2. If you tried it: what worked, what did not, what got in the way?
3. What is missing for it to be useful to you?

Short answers are fine. "Not for me" helps as much as "yes".