forked from MagicMirrorOrg/MagicMirror
-
Notifications
You must be signed in to change notification settings - Fork 0
Configuring the Raspberry Pi
Joel Tyler edited this page May 24, 2016
·
14 revisions
##Rotating the screen edit /boot/config.txt:
sudo nano /boot/config.txt
Add the following line:
display_rotate=1
sudo reboot
##Autohiding the Mouse Cursor
Install _unclutter_:
sudo apt-get install unclutter
__version 1 only__
##Disabling the screensaver
edit _/etc/xdg/lxsession/LXDE-pi/autostart_:
sudo nano /etc/xdg/lxsession/LXDE-pi/autostart
Add the following lines:
@xset s noblank @xset s off @xset -dpms
Edit _/etc/lightdm/lightdm.conf_:
sudo nano /etc/lightdm/lightdm.conf
Add the following line below [SeatDefaults]
xserver-command=X -s 0 -dpms
## Disable WiFi Power Save
Edit _/etc/modprobe.d/8192cu.conf_
```shell
sudo nano /etc/modprobe.d/8192cu.conf
```
Add the following lines
```shell
# Disable power saving
options 8192cu rtw_power_mgnt=0 rtw_enusbss=1 rtw_ips_mode=1
```
**For Raspberry Pi 3**
Edit _/etc/network/interfaces_
```shell
sudo nano /etc/network/interfaces
```
Add the following line under the _wlan0_ section
```shell
wireless-power off
```
Reboot your PI
```shell
sudo reboot
```
## Enable file sharing with OS X
Install _Netatalk_:
sudo apt-get install netatalk
## Enable VNC
Install _x11vnc_:
sudo apt-get install x11vnc
Set VNC password:
x11vnc -storepasswd
Create an auto-start file:
cd ~/.config mkdir autostart cd autostart nano x11vnc.desktop
Add the following lines:
[Desktop Entry] Encoding=UTF-8 Type=Application Name=X11VNC Comment= Exec=x11vnc -forever -usepw -display :0 -ultrafilexfer StartupNotify=false Terminal=false Hidden=false