Simulations with O’Regan 2022 parameter set not working at 2C 0°C, 2C 10°C and WLTP 0°C

[ashimkal]

Hello,
I am working with the O'Regan parameter set to get temperature prediction for LGM50 to compare the predictions with the model that I have developed. I am using this code as the reference:

https://docs.pybamm.org/en/latest/source/examples/notebooks/models/simulating-ORegan-2022-parameter-set.html

data_file = loadmat('WLTP_2_CYCLES_FULL_SET.mat')
Crate, Temp = "2C",0
t,T,T_inf,I,SOC_0 =load_data(Crate,Temp)

options = {"thermal":"lumped","dimensionality":0,"cell geometry":"arbitrary"}
model = pybamm.lithium_ion.DFN(options=options)
#O'Regan parameter set
param = pybamm.ParameterValues("ORegan2022")
solver = pybamm.IDAKLUSolver()

param["Total heat transfer coefficient [W.m-2.K-1]"] = 14
param["Ambient temperature [K]"] = T_inf
param["Initial temperature [K]"] = T_inf
param["Current function [A]"]    = I

When I run the simulation for the 2C 0°C, 2C 10°C and WLTP 0°C conditions I am getting the following error

---------------------------------------------------------------------------
SolverError                               Traceback (most recent call last)
Cell In[106], line 1
----> 1 sol = sim.solve(t_eval=t, initial_soc=SOC_0)

File ~\AppData\Local\anaconda3\envs\battery\Lib\site-packages\pybamm\simulation.py:488, in Simulation.solve(self, t_eval, solver, save_at_cycles, calc_esoh, starting_solution, initial_soc, callbacks, showprogress, inputs, **kwargs)
    474             if dt_eval_max > dt_data_min + sys.float_info.epsilon:
    475                 warnings.warn(
    476                     f"""
    477                     The largest timestep in t_eval ({dt_eval_max}) is larger than
   (...)
    485                     stacklevel=2,
    486                 )
--> 488     self._solution = solver.solve(
    489         self.built_model, t_eval, inputs=inputs, **kwargs
    490     )
    492 elif self.operating_mode == "with experiment":
    493     callbacks.on_experiment_start(logs)

File ~\AppData\Local\anaconda3\envs\battery\Lib\site-packages\pybamm\solvers\base_solver.py:903, in BaseSolver.solve(self, model, t_eval, inputs, nproc, calculate_sensitivities)
    901 ninputs = len(model_inputs_list)
    902 if ninputs == 1:
--> 903     new_solution = self._integrate(
    904         model,
    905         t_eval[start_index:end_index],
    906         model_inputs_list[0],
    907     )
    908     new_solutions = [new_solution]
    909 else:

File ~\AppData\Local\anaconda3\envs\battery\Lib\site-packages\pybamm\solvers\idaklu_solver.py:679, in IDAKLUSolver._integrate(self, model, t_eval, inputs_dict)
    677     return newsol
    678 else:
--> 679     raise pybamm.SolverError("idaklu solver failed")

SolverError: idaklu solver failed

The simulation works fine under conditions at:

0.5C 0°C
0.5C 10°C
0.5C 25°C
1C  0°C
1C  10°C
1C  25°C
2C 25°C
WLTP 10°C
WLTP 25°C

Any insight on why the solver fails at 2C 0°C, 2C 10°Cand WLTP 0°C?

Any help would be much appreciated

[github-actions[bot]]

Hi! We have now moved our discussions to Discourse. Please post your question there.