Switches Combined

Two Switches as a Single Channel

Using this feature, it is possible to use pairs of switches as a single channel source. Go to the Key ⭢ Aux Channels menu to configure it. There are following combinations available:

• SwA+B
• SwB+C
• SwC+D

2-position and 3-position Switch

For the SwA+B and SwC+D variants, the channel value is computed as follows:

SwA or SwD	SwB or SwC	Value
off	0 (off)	-100 %
off	1 (mid)	-60 %
off	2 (on)	-20 %
on	0 (off)	20 %
on	1 (mid)	60 %
on	2 (on)	100 %

The above assumes that the three-position SwB switch has been installed.

Two 3-position Switches

For the SwB+C variant with three-position SwB switch the channel value is computed as follows:

SwB	SwC	Value
0 (off)	0 (off)	-100 %
0 (off)	1 (mid)	-75 %
0 (off)	2 (on)	-50 %
1 (mid)	0 (off)	-25 %
1 (mid)	1 (mid)	0 %
1 (mid)	2 (on)	25 %
2 (on)	0 (off)	50 %
2 (on)	1 (mid)	75 %
2 (on)	2 (on)	100 %