Help With Settings! Max Outstanding Piece Requests Reached

[DeathStalker77]

Hello all!

Using v4.5.2 x64 (Qt 6.4.2, Lbt 1.2.18.0) I was looking to adjust the settings for better upload speeds and I looked at the log (for the 1st time) and saw I was getting this dreaded Performance Warning. I done some pretty thorough searching, but I cannot seem to find what is expected to be "optimal" settings.

SYSTEM
Intel i7 6850K (Broadwell-E) 6 Cores/12 Threads
64gb RAM

SETTINGS

Thoughts? (ISP is 1gb up/down)

MANY thanks!!!

--- DS

[DeathStalker77]

No matter what I change the settings to, I am still getting the error :-( I have gone as high as 4096 for Max Outstanding Requests To A Single Peer, and the message persists.

Here is the bottom section of the Options-

--- DS

[DeathStalker77]

So com eon all you friends & geniuses! Help a non-coder out here! I can figure out WTF is going on. I've tried every setting I could find in searching, and NOTHING works :-( Help a fellow geek out please! <3

MANY thanks!!!!

--- DS

[DeathStalker77]

I can't believe no one has a response to this! I have clearly tried the other suggestions that have been made and they have not helped. What more can I provide aside from the whole settings? Win10x all latest updates, Intel i7 6850K (Broadwell-E) CPU, 64 GB RAM (screenshot from CoreTemp)

RAM info

Thanks!

--- DS

[thalieht]

I don't know the solution but some things i would try:
Toggle settings that mentions pieces i.e. try disabling "piece extent affinity" and/or "upload piece suggestions"
Set "Max Outstanding Requests To A Single Peer" to something way higher e.g. 20000 or 50000 just to see what happens.

P.S "Max Outstanding Requests To A Single Peer" default is 500, not 512 so it seems you don't need to use powers of 2 for this setting.

[DeathStalker77]

Ok, will give those a try and see what happens.

--- DS

[DeathStalker77]

Nope! Turned both those options off, tried 20,000, 25,0000, 35,000, & 50,000 - the message still persists. :-(

--- DS

[DeathStalker77]

Just astonished that no one has any ideas on this issue. Since SHOWING the Execution Log is not turned on by default, I wonder how many people are actually getting the message/error, and just don't know it? I went for over a year without knowing it.

--- DS

[DeathStalker77]

Umm, HELLO! Did you READ what was written? NOT OLD LOGS!!! This is happening with the CURRENT version!!! Just "not showing" alerts does not make them magically no longer occur.

Your response was, I'm sorry to say, 100% totally useless.

--- DS

[DeathStalker77]

All this info and NO ONE has any answers at all? This CONTINUES to happen even with the current v4.5.4 version.

--- DS

[DeathStalker77]

Ok, so I even upgraded to v4.6.0RC2 64-bit
QT: 6.4.3
LB: 2.0.9.0

And the problem still exists......

[DeathStalker77]

Ok, it just seems "illogical" for there to be a "Performance Alert" if there IS no actual performance issue - that says there is something WRONG with the code to begin with!

The next question then, is what are considered "MAX" settings? (For 4.6.0RC2 x64 LB2)

--- DS

[Obegg]

2,147,483,647 is the "max".
But even when I maxed out every setting I still have the performance alert messages, so I'm in the same boat as you, can't understand why or how to fix it.