Glymur v8 dt#877
Merged
rrnayak merged 32 commits intoqualcomm-linux:tech/all/dt/glymurfrom Apr 6, 2026
Merged
Conversation
Document Glymur SoC bindings and Compute Reference Device (CRD) board id Link: https://lore.kernel.org/r/20260219-upstream_v3_glymur_introduction-v8-1-8ce4e489ebb6@oss.qualcomm.com Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Introduce the base device tree support for Glymur – Qualcomm's next-generation compute SoC. The new glymur.dtsi describes the core SoC components, including: - CPUs and CPU topology - Interrupt controller and TLMM - GCC,DISPCC and RPMHCC clock controllers - Reserved memory and interconnects - APPS and PCIe SMMU and firmware SCM - Watchdog, RPMHPD, APPS RSC and SRAM - PSCI and PMU nodes - QUPv3 serial engines - CPU power domains and idle states, plus SCMI/ SRAM pieces for CPU DVFS - PDP0 mailbox, IPCC and AOSS - Display clock controller - SPMI PMIC arbiter with SPMI0/1/2 buses - SMP2P nodes - TSENS and thermal zones (8 instances, 92 sensors) Add dtsi files for PMH0101, PMK8850, PMCX0102, SMB2370, PMH0104, PMH0110, PMIC's along with temp-alarm and GPIO nodes needed on Glymur Enabled PCIe controllers and associated PHY to support boot to shell with nvme storage, List of PCIe instances enabled: - PCIe3b - PCIe4 - PCIe5 - PCIe6 Link: https://lore.kernel.org/r/20260219-upstream_v3_glymur_introduction-v8-3-8ce4e489ebb6@oss.qualcomm.com Co-developed-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com> Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com> Co-developed-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com> Signed-off-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com> Co-developed-by: Maulik Shah <maulik.shah@oss.qualcomm.com> Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com> Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Co-developed-by: Taniya Das <taniya.das@oss.qualcomm.com> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com> Co-developed-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Co-developed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Co-developed-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com> Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com> Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add initial device tree support for the Glymur Compute Reference Device(CRD) board, with this board dts glymur crd can boot to shell with rootfs on nvme and uart21 as serial console Features enabled are: - Board and sleep clocks - Volume up/down keys - Regulators 0 - 4 - Power supplies and sideband signals (PERST, WAKE, CLKREQ) for PCIe3b/4/5/6 controllers and PHYs Link: https://lore.kernel.org/r/20260219-upstream_v3_glymur_introduction-v8-4-8ce4e489ebb6@oss.qualcomm.com Co-developed-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Co-developed-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com> Signed-off-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The generic Qualcomm Oryon CPU compatible used by the Glymur SoC is deprecated and incorrect since it uses a single compatible to describe two different core variants. It is now replaced with two different core-specific compatibles based on MIDR part and variant number. CPUS 0-5: MIDR_EL1[PART_NUM] - 0x2 MIDR_EL1[VARIANT] - 0x2 CPUS 6-17: MIDR_EL1[PART_NUM] - 0x2 MIDR_EL1[VARIANT] - 0x1 Fixes: 41b6e8d ("arm64: dts: qcom: Introduce Glymur base dtsi") Link: https://lore.kernel.org/r/20260313103439.1255247-3-sibi.sankar@oss.qualcomm.com Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Mahua is a derivative of Glymur SoC with the third CPU cluster disabled. Document the compatible strings for the Mahua SoC and the Compute Reference Device (CRD) board based on it. Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260318124100.212992-2-gopikrishna.garmidi@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Commonize the existing Glymur CRD DTSI to allow reuse with Mahua CRDs. Leave the PCIe3b nodes disabled by default, since the UEFI has the instance disabled to avoid boot delays due to link failures. Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260318124100.212992-3-gopikrishna.garmidi@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Introduce support for the Mahua SoC and the CRD based on it. Some of the notable differences are the absent CPU cluster, interconnect, TLMM, thermal zones and adjusted PCIe west clocks. Everything else should work as-is. Co-developed-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com> Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com> Co-developed-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Co-developed-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com> Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com> Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260318124100.212992-4-gopikrishna.garmidi@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add the CPU BWMON nodes for glymur SoCs. Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Pragnesh Papaniya <pragnesh.papaniya@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260302-glymur_bwmon_dt-v1-1-f4939d75bd47@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The Glymur USB subsystem contains three USB 3.2 Gen 2 controllers, one USB 3.2 multi-port controller, and one USB 2.0-only controller. This includes five SS USB QMP PHYs (three combo and two UNI) and six M31 eUSB2 PHYs. All controllers are based on SNPS DWC3, so describe them as Qualcomm flattened DWC3 nodes. Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com> Co-developed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-add-usb-support-v7-1-ba367eda6010@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The Qualcomm Glymur Compute Reference Device comes with two Type-C ports, one USB Type-A port, and a fingerprint reader connected over USB. Each Type-C port is connected to one USB combo PHY and one M31 eUSB2 PHY. The Type-A port is connected to the USB multi-port controller through one M31 eUSB2 PHY and one USB3 UNI PHY. The fingerprint reader is connected to the USB_2 controller. All M31 eUSB2 PHYs have associated eUSB2-to-USB 2.0 repeaters, which are either integrated in SMB2370 PMICs or provided by dedicated NXP PTN3222 devices. Enable all required controllers, PHYs, and repeaters, while specifying their supplies. Also describe the PMIC GLINK graph for the Type-C connectors. Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com> Co-developed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Tested-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-add-usb-support-v7-2-ba367eda6010@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The MDSS (Mobile Display SubSystem) on Glymur provides four DisplayPort controllers. Describe them together with the display controller and eDP PHY. Also add the combo PHY link and vco_div clocks to the display clock controller, and connect the PHYs and DP endpoints in the graph. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-crd-add-edp-v7-1-ca415560447e@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Enable the MDSS (Mobile Display SubSystem), the third DisplayPort controller, and its PHY to drive the onboard eDP panel on the Glymur CRD platform. Also describe the regulator supplying panel power. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-dts-qcom-glymur-crd-add-edp-v7-2-ca415560447e@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
… touchscreen On CRD, the keyboard, trackpad and touchscreen are connected over I2C and all share a 3.3V regulator. So describe the regulator and each input device along with their pinctrl states. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260320-glymur-dts-crd-enable-kbd-tp-ts-v6-1-626d008534d9@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add missing opp entry that corresponds to highest ddr frequency for Glymur/Mahua SoCs. Fixes: e494589 ("arm64: dts: qcom: glymur: Add glymur BWMONs") Signed-off-by: Pragnesh Papaniya <pragnesh.papaniya@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260325-bwmon_fixes-v1-1-9433f9d4c276@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Delete the bwmon node that corresponds to non-existent cpu cluster 2 on Mahua SoCs. Fixes: 598eedb ("arm64: dts: qcom: Add Mahua SoC and CRD") Tested-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com> Signed-off-by: Pragnesh Papaniya <pragnesh.papaniya@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260325-bwmon_fixes-v1-2-9433f9d4c276@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The display, peripherals (touchpad/touchscreen/keypad), usb and their dependent device nodes are common to both Glymur and Mahua CRDs, so move them from glymur-crd.dts to glymur-crd.dtsi to enable code reuse. Link: https://lore.kernel.org/lkml/20260326-glymur-mahua-common-nodes-v1-1-12bb26920ea4@oss.qualcomm.com/ Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The Glymur CRD features a WCN7850 WLAN and Bluetooth combo chip. So describe both the 0.9V and the 3.3V regulators, then WCN7850 PMU and the PCIe WLAN and the UART Bluetooth nodes. This enables WLAN and Bluetooth functionality on the CRD. Link: https://lore.kernel.org/all/20260309-glymur-dts-crd-enable-bt-wlan-v1-1-3badbddd5439@oss.qualcomm.com/ Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add remoteproc PAS loader for ADSP and CDSP with its fastrpc nodes. Link: https://lore.kernel.org/lkml/20260325035338.1393287-1-sibi.sankar@oss.qualcomm.com/ Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Enable ADSP and CDSP on Glymur CRD board. Link: https://lore.kernel.org/lkml/20260325035338.1393287-1-sibi.sankar@oss.qualcomm.com/ Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add LPASS macro codecs and LPASS TLMM pin controller on Qualcomm glymur. for proper sound support. Also add GPR(Generic Pack router) node along with APM(Audio Process Manager) and PRM(Proxy resource Manager) audio services. Link: https://lore.kernel.org/lkml/20260325035338.1393287-5-sibi.sankar@oss.qualcomm.com/ Co-developed-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com> Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add the sound card of Glymur-crd board with the routing for speakers. Add device nodes for the sound support with WSA884x smart speakers and playback via speakers and recording via DMIC microphones. Link: https://lore.kernel.org/lkml/20260325035338.1393287-6-sibi.sankar@oss.qualcomm.com/ Co-developed-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com> Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
…Glymur Add the device nodes for the multimedia clock controllers videocc, gpucc and gxclkctl. Link: https://lore.kernel.org/r/20260220-glymur_mmcc_dt_config-v1-1-e0e2f43a32af@oss.qualcomm.com Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The Adreno X2 series GPU present in Glymur SoC belongs to the A8x family. It is a new HW IP with architectural improvements as well as different set of hw configs like GMEM, num SPs, Caches sizes etc. Add the GPU and GMU nodes to describe this hardware. Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add the nodes to describe GPU smmu Signed-off-by: Rajendra Nayak <rajendra.nayak@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Glymur GPU opp-supported-hw Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Glymur BW update Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add CoreSight nodes to enable trace paths like TPDM->ETF/STM->ETF. These devices are part of the AOSS, CDSP, QDSS, PCIe5, TraceNoc and some small subsystems, such as GCC, IPCC, PMU and so on. Link: https://lore.kernel.org/all/20260318-add-coresight-dt-nodes-for-glymur-v2-1-d76e08f21fa5@oss.qualcomm.com/ Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Describe PCIe3a controller and PHY. Also add required system resources like regulators, clocks, interrupts and registers configuration for PCIe3a. Link: https://lore.kernel.org/all/20260304-glymur_gen5x8_phy-v1-5-849e9a72e125@oss.qualcomm.com/ Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add embedded controller node for Glymur CRDs which adds fan control, temperature sensors, access to EC state changes through SCI events and suspend entry/exit notifications to the EC. Link: https://lore.kernel.org/lkml/20260313-v04-add-driver-for-ec-v4-3-ca9d0efd62aa@oss.qualcomm.com/ Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
…r PCIe PHY on Glymur Add refgen and qref power supplies in each pcie phy devicetree node. For some instance, refgen and qref may share LDOs with phy LDOs, so add additional power supplies. Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Switch opp entry for dispcc to turbo Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
…CP on Glymur DT Add remoteproc PAS loader for SoCCP on Glymur DT Link: https://lore.kernel.org/all/20260403-glymur-soccp-v3-1-f0e8d57f11ba@oss.qualcomm.com/ Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Co-developed-by: Ananthu C V <ananthu.cv@oss.qualcomm.com> Signed-off-by: Ananthu C V <ananthu.cv@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
rrnayak
merged commit ac7a496
into
qualcomm-linux:tech/all/dt/glymur
3 of 5 checks passed
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
11 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.