docs: add cm4 ufs boot system

docs/som/cm/cm4/getting-started/install-system/ufs-boot/README.md

@@ -0,0 +1,7 @@
+---
+sidebar_position: 3
+---
+
+# 安装系统到 UFS 模块
+
+<DocCardList />

docs/som/cm/cm4/getting-started/install-system/ufs-boot/no-reader.md

@@ -0,0 +1,11 @@
+---
+sidebar_position: 2
+---
+
+import DDUse from '../../../../../../common/radxa-os/install-system/\_use_dd_ufs.mdx';
+
+# 从 microSD 卡 或板载 eMMC 安装系统到 UFS 模块
+
+<DDUse boot_device="microSD 卡或板载 eMMC" tag="ufs_module" download_page="../../../download" download_url="https://github.com/radxa-build/radxa-rk3576/releases/download/rsdk-r5/radxa-rk3576_bookworm_kde_r5.output_4096.img.xz" path_to_image_unxz="radxa-rk3576_bookworm_kde_r5.output_4096.img" path_to_image="radxa-rk3576_bookworm_kde_r5.output_4096.img" device_target="/dev/sda" board="cm4" />
+
+说明：UFS 启动需要将 UFS BOOT 引脚使用跳线帽或者杜邦线短接（短接后无法从 eMMC 启动），接口位置可以参考 [其它接口](../../../hardware-use/other.md) 文档。

docs/som/cm/cm4/getting-started/install-system/ufs-boot/reader.md

@@ -0,0 +1,11 @@
+---
+sidebar_position: 1
+---
+
+import InstallSystem from '../../../../../../common/radxa-os/install-system/\_use_etcher_ufs.mdx';
+
+# 使用读卡器安装系统
+
+<InstallSystem download_page="../../../download"/>
+
+说明：UFS 启动需要将 UFS BOOT 引脚使用跳线帽或者杜邦线短接（短接后无法从 eMMC 启动），接口位置可以参考 [其它接口](../../../hardware-use/other.md) 文档。

docs/som/cm/cm4/getting-started/quickly_start.md

@@ -63,9 +63,9 @@ sidebar_position: 1
 完成系统的安装后，你可以将 MicroSD 卡安装到 CM4 IO 板的 MicroSD 卡槽上，然后连接电源适配器启动系统。
 
 :::tip 系统启动优先级
-若您在主板上安装了多个系统启动介质，系统启动优先级如下：目前暂不支持 UFS 模块启动系统
+若您在主板上安装了多个系统启动介质，系统启动优先级如下：
 
-MicroSD 卡 > 板载 eMMC > UFS 模块（暂不支持） > NVMe SSD
+MicroSD 卡 > 板载 eMMC > UFS 模块 > NVMe SSD
 :::
 
 <div style={{textAlign: 'center'}}>

docs/som/cm/cm4/getting-started/use_system.md

@@ -15,9 +15,9 @@ sidebar_position: 3
 将系统启动介质安装到主板对应位置，然后使用电源适配器给主板供电并启动系统。
 
 :::tip 系统启动优先级
-若您在主板上安装了多个系统启动介质，系统启动优先级如下：目前暂不支持 UFS 模块启动系统
+若您在主板上安装了多个系统启动介质，系统启动优先级如下：
 
-MicroSD 卡 > 板载 eMMC > UFS 模块（暂不支持） > NVMe SSD
+MicroSD 卡 > 板载 eMMC > UFS 模块 > NVMe SSD
 :::
 
 **说明：你可以将优先级较高的系统启动介质取下来，这样系统就会从优先级较低的系统启动介质启动。**

i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm4/getting-started/install-system/ufs-boot/README.md

@@ -0,0 +1,7 @@
+---
+sidebar_position: 3
+---
+
+# Install System to UFS Module
+
+<DocCardList />

i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm4/getting-started/install-system/ufs-boot/no-reader.md

@@ -0,0 +1,11 @@
+---
+sidebar_position: 2
+---
+
+import DDUse from '../../../../../../common/radxa-os/install-system/\_use_dd_ufs.mdx';
+
+# Install System to UFS Module from microSD Card or Onboard eMMC
+
+<DDUse boot_device="microSD card or onboard eMMC" tag="ufs_module" download_page="../../../download" download_url="https://github.com/radxa-build/radxa-rk3576/releases/download/rsdk-r5/radxa-rk3576_bookworm_kde_r5.output_4096.img.xz" path_to_image_unxz="radxa-rk3576_bookworm_kde_r5.output_4096.img" path_to_image="radxa-rk3576_bookworm_kde_r5.output_4096.img" device_target="/dev/sda" board="cm4" />
+
+Note: To boot from UFS, you need to short the UFS BOOT pins using a jumper cap or DuPont wire (after shorting, the system cannot boot from eMMC). For the connector location, refer to the [Other Interfaces](../../../hardware-use/other.md) document.

i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm4/getting-started/install-system/ufs-boot/reader.md

@@ -0,0 +1,11 @@
+---
+sidebar_position: 1
+---
+
+import InstallSystem from '../../../../../../common/radxa-os/install-system/\_use_etcher_ufs.mdx';
+
+# Install System Using Card Reader
+
+<InstallSystem download_page="../../../download"/>
+
+Note: To boot from UFS, you need to short the UFS BOOT pins using a jumper cap or DuPont wire (after shorting, the system cannot boot from eMMC). For the connector location, refer to the [Other Interfaces](../../../hardware-use/other.md) document.

i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm4/getting-started/quickly_start.md

@@ -65,7 +65,7 @@ After completing the system installation, insert the MicroSD card into the CM4 I
 :::tip Boot Priority
 If you have multiple boot media installed, the system will boot in the following priority order:
 
-MicroSD Card > Onboard eMMC > UFS Module (Not Supported) > NVMe SSD
+MicroSD Card > Onboard eMMC > UFS Module > NVMe SSD
 :::
 
 <div style={{textAlign: 'center'}}>

i18n/en/docusaurus-plugin-content-docs/current/som/cm/cm4/getting-started/use_system.md

@@ -15,9 +15,9 @@ If you haven't installed the system yet, please refer to the [Install System](./
 Install the boot media in the corresponding slot on the motherboard, then power on the board using the power adapter to start the system.
 
 :::tip Boot Priority
-If you have multiple boot media installed on the motherboard, the system will boot in the following priority order (Note: UFS module boot is currently not supported):
+If you have multiple boot media installed on the motherboard, the system will boot in the following priority order:
 
-MicroSD Card > Onboard eMMC > UFS Module (Not Supported) > NVMe SSD
+MicroSD Card > Onboard eMMC > UFS Module > NVMe SSD
 :::
 
 **Note:** You can remove the higher priority boot media to force the system to boot from a lower priority media.