New Crowdin updates

ar-SA/meta.yml

@@ -0,0 +1,11 @@
+---
+title: ارسم مستطيلاً
+hero_image: images/banner.png
+description: ارسم مستطيلاً باستخدام المعالجة في Python
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: المقدمة

ar-SA/step_1.md

@@ -0,0 +1,24 @@
+ارسم مربعًا أو مستطيلًا باستخدام: `rect(x, y, الارتفاع, العرض)`
+
+سيتم رسم المستطيل باستخدام حركة سريعة والتعبئة التي تم تعيينها قبل استدعاء `rect`.
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100)  # x, y, width, height
+
+--- /code ---
+
+The rectangle will be drawn with its top left corner at the (x, y) coordinates given by the first two numbers.
+
+**Tip:** If you want the center of the rectangle to be at the (x, y) coordinates then call `rect_mode(CENTER)` in the `setup` function.
+
+The third number is the width and the fourth is the height of the rectangle.
+
+![The output area showing a rectangle centred around x 160, y 220 with width 200 and height 100](images/example.png)
+
+Make the width and height the same to draw a square.
+

cy-GB/meta.yml

@@ -0,0 +1,11 @@
+---
+title: Llunio petryal
+hero_image: images/banner.png
+description: Llunio petryal gan ddefnyddio prosesu yn Python
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: Cyflwyniad

cy-GB/step_1.md

@@ -0,0 +1,24 @@
+Lluniwch sgwâr neu betryal gan ddefnyddio: `rect(x, y, lled, uchder)`
+
+Bydd y petryal yn cael ei lunio gan ddefnyddio'r gwerthoedd strôc a llenwi sydd wedi'u gosod cyn galw `rect`.
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100)  # x, y, width, height
+
+--- /code ---
+
+The rectangle will be drawn with its top left corner at the (x, y) coordinates given by the first two numbers.
+
+**Tip:** If you want the center of the rectangle to be at the (x, y) coordinates then call `rect_mode(CENTER)` in the `setup` function.
+
+The third number is the width and the fourth is the height of the rectangle.
+
+![The output area showing a rectangle centred around x 160, y 220 with width 200 and height 100](images/example.png)
+
+Make the width and height the same to draw a square.
+

de-DE/meta.yml

@@ -0,0 +1,11 @@
+---
+title: Zeichne ein Rechteck
+hero_image: images/banner.png
+description: Zeichne mit Processing ein Rechteck in Python
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: Einleitung

de-DE/step_1.md

@@ -0,0 +1,24 @@
+Zeichne ein Quadrat oder Rechteck mit: `rect(x, y, breite, höhe)`
+
+Das Rechteck wird mit den Strich- und Füllwerten gezeichnet, die vor dem Aufruf von `rect` festgelegt wurden.
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100) # x, y, Breite, Höhe
+
+--- /code ---
+
+Das Rechteck wird mit seiner oberen linken Ecke an den (x, y)-Koordinaten gezeichnet, die durch die ersten beiden Zahlen angegeben werden.
+
+**Tipp:** Wenn der Mittelpunkt des Rechtecks bei den Koordinaten (x, y) liegen soll, rufe `rect_mode(CENTER)` in der `setup` Funktion auf.
+
+Die dritte Zahl ist die Breite und die vierte die Höhe des Rechtecks.
+
+![Der Ausgabebereich zeigt ein Rechteck, welches an dem Mittelpunkt x 160, y 220 zentriert ist. Es hat die Breite 200 und Höhe 100](images/example.png)
+
+Stelle Breite und Höhe gleich ein, um ein Quadrat zu zeichnen.
+

el-GR/meta.yml

@@ -0,0 +1,11 @@
+---
+title: Σχεδίασε ένα ορθογώνιο
+hero_image: images/banner.png
+description: Σχεδίασε ένα ορθογώνιο με Python
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: Εισαγωγή

el-GR/step_1.md

@@ -0,0 +1,24 @@
+Σχεδίασε ένα τετράγωνο ή ορθογώνιο χρησιμοποιώντας: `rect (x, y, width, height)`
+
+Το ορθογώνιο θα σχεδιαστεί χρησιμοποιώντας τις τιμές περιγράμματος και χρώματος που έχουν οριστεί πριν καλέσεις το `rect`.
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100)  # x, y, width, height
+
+--- /code ---
+
+The rectangle will be drawn with its top left corner at the (x, y) coordinates given by the first two numbers.
+
+**Tip:** If you want the center of the rectangle to be at the (x, y) coordinates then call `rect_mode(CENTER)` in the `setup` function.
+
+The third number is the width and the fourth is the height of the rectangle.
+
+![The output area showing a rectangle centred around x 160, y 220 with width 200 and height 100](images/example.png)
+
+Make the width and height the same to draw a square.
+

es-419/meta.yml

@@ -0,0 +1,11 @@
+---
+title: Dibuja un rectángulo
+hero_image: images/banner.png
+description: Dibuja un rectángulo usando funciones de Python
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: Introducción

es-419/step_1.md

@@ -0,0 +1,24 @@
+Dibuja un cuadrado o rectángulo usando: `rect(x, y, ancho, alto)`
+
+El rectángulo se dibuja utilizando los valores de trazo y relleno que se han establecido antes de llamar a la función `rect`.
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100)  # x, y, width, height
+
+--- /code ---
+
+The rectangle will be drawn with its top left corner at the (x, y) coordinates given by the first two numbers.
+
+**Tip:** If you want the center of the rectangle to be at the (x, y) coordinates then call `rect_mode(CENTER)` in the `setup` function.
+
+The third number is the width and the fourth is the height of the rectangle.
+
+![The output area showing a rectangle centred around x 160, y 220 with width 200 and height 100](images/example.png)
+
+Make the width and height the same to draw a square.
+

fr-FR/meta.yml

@@ -0,0 +1,11 @@
+---
+title: Dessiner un rectangle
+hero_image: images/banner.png
+description: Dessiner un rectangle en utilisant Python
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: Introduction

fr-FR/step_1.md

@@ -0,0 +1,24 @@
+Dessiner un carré ou un rectangle en utilisant : `rect(x, y, width, height)`
+
+Le rectangle sera dessiné en utilisant les valeurs de trait et de remplissage qui ont été définies avant l'appel de `rect`.
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100)  # x, y, width, height
+
+--- /code ---
+
+The rectangle will be drawn with its top left corner at the (x, y) coordinates given by the first two numbers.
+
+**Tip:** If you want the center of the rectangle to be at the (x, y) coordinates then call `rect_mode(CENTER)` in the `setup` function.
+
+The third number is the width and the fourth is the height of the rectangle.
+
+![The output area showing a rectangle centred around x 160, y 220 with width 200 and height 100](images/example.png)
+
+Make the width and height the same to draw a square.
+

hi-IN/meta.yml

@@ -0,0 +1,11 @@
+---
+title: Draw a rectangle
+hero_image: images/banner.png
+description: Draw a rectangle using processing in Python
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: Introduction

hi-IN/step_1.md

@@ -0,0 +1,24 @@
+Draw a square or rectangle using: `rect(x, y, width, height)`
+
+The rectangle will be drawn using the stroke and fill values that have been set before `rect` is called.
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100)  # x, y, width, height
+
+--- /code ---
+
+The rectangle will be drawn with its top left corner at the (x, y) coordinates given by the first two numbers.
+
+**Tip:** If you want the center of the rectangle to be at the (x, y) coordinates then call `rect_mode(CENTER)` in the `setup` function.
+
+The third number is the width and the fourth is the height of the rectangle.
+
+![The output area showing a rectangle centred around x 160, y 220 with width 200 and height 100](images/example.png)
+
+Make the width and height the same to draw a square.
+

it-IT/meta.yml

@@ -0,0 +1,11 @@
+---
+title: Disegna un rettangolo
+hero_image: images/banner.png
+description: Disegna un rettangolo con Python, usando processing
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: Introduzione

it-IT/step_1.md

@@ -0,0 +1,24 @@
+Disegna un quadrato o un rettangolo usando: `rect(x, y, larghezza, altezza)`
+
+Il rettangolo verrà disegnato utilizzando i valori di tratto e riempimento impostati prima che venga chiamata la funzione `rect`.
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100) # x, y, larghezza, altezza
+
+--- /code ---
+
+Il rettangolo verrà disegnato con l'angolo superiore sinistro alle coordinate (x, y) date dai primi due numeri.
+
+**Suggerimento:** Se vuoi che il centro del rettangolo si trovi sulle coordinate (x, y), chiama `rect_mode(CENTER)` nella funzione `setup`.
+
+Il terzo numero è la larghezza e il quarto è l'altezza del rettangolo.
+
+![L'area di output, che mostra un rettangolo con origine in x 160, y 220, larghezza 200 e altezza 100](images/example.png)
+
+Rendi la larghezza e l'altezza uguali per disegnare un quadrato.
+

ja-JP/meta.yml

@@ -0,0 +1,11 @@
+---
+title: 四角形を描く
+hero_image: images/banner.png
+description: PythonのProcessingを使って四角形を描きます
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: はじめに

ja-JP/step_1.md

@@ -0,0 +1,24 @@
+次を使って正方形や長方形を描きます。`rect(x, y, 幅, 高さ)`
+
+`rect`が呼び出される前に設定されていた輪郭線と塗りつぶしの値を使って四角形が描かれます。
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100)  # x, y, width, height
+
+--- /code ---
+
+The rectangle will be drawn with its top left corner at the (x, y) coordinates given by the first two numbers.
+
+**Tip:** If you want the center of the rectangle to be at the (x, y) coordinates then call `rect_mode(CENTER)` in the `setup` function.
+
+The third number is the width and the fourth is the height of the rectangle.
+
+![The output area showing a rectangle centred around x 160, y 220 with width 200 and height 100](images/example.png)
+
+Make the width and height the same to draw a square.
+

kn-IN/meta.yml

@@ -0,0 +1,11 @@
+---
+title: Draw a rectangle
+hero_image: images/banner.png
+description: Draw a rectangle using processing in Python
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: Introduction

kn-IN/step_1.md

@@ -0,0 +1,24 @@
+Draw a square or rectangle using: `rect(x, y, width, height)`
+
+The rectangle will be drawn using the stroke and fill values that have been set before `rect` is called.
+
+--- code ---
+---
+language: python
+filename: main.py
+---
+
+    rect(160, 220, 200, 100)  # x, y, width, height
+
+--- /code ---
+
+The rectangle will be drawn with its top left corner at the (x, y) coordinates given by the first two numbers.
+
+**Tip:** If you want the center of the rectangle to be at the (x, y) coordinates then call `rect_mode(CENTER)` in the `setup` function.
+
+The third number is the width and the fourth is the height of the rectangle.
+
+![The output area showing a rectangle centred around x 160, y 220 with width 200 and height 100](images/example.png)
+
+Make the width and height the same to draw a square.
+

mr-IN/meta.yml

@@ -0,0 +1,11 @@
+---
+title: Draw a rectangle
+hero_image: images/banner.png
+description: Draw a rectangle using processing in Python
+version: 4
+listed: false
+copyedit: false
+last_tested: "2021-07-22"
+steps:
+  - 
+    title: Introduction